first, set the correct vpid/apid in the lamedb
log in to your box (telnet/ssh/putty)
init 4
enigma2
now tune the channel
ctrl+c
and post the log here.
BTW, since my initial reply you mentioned that a BISS encoding is used.
That means more workarounds are needed, in order to let the softcam do its job (it needs the PMT as well, to find the ecm pid).
Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge
Started by Robinson, 30 Nov 2012 21:39
1943 replies to this topic
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #21
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 1 December 2012 - 20:55
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #22
-
- Senior Member
- 2,621 posts
+30
Good
Posted 1 December 2012 - 22:39
OK, I hope to give you a log early next week. Although I am getting reports that PMT is temporarily free again. However, I am not sure if info on BISS encoding (ecm pid) is available to Dreamboxes.
I understand it will not be simple and will require lots of effort.BTW, since my initial reply you mentioned that a BISS encoding is used.
That means more workarounds are needed, in order to let the softcam do its job (it needs the PMT as well, to find the ecm pid).
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #23
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 1 December 2012 - 23:45
However, I am not sure if info on BISS encoding (ecm pid) is available to Dreamboxes.
it has nothing to do with dreamboxes. You just need a softcam which supports BISS.
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #24
-
- Senior Member
- 2,621 posts
+30
Good
Posted 2 December 2012 - 14:40
But how does the softcam know it is supposed to use BISS keys if, apparently, scrambling information is missing or ECM_PID is scrambled? From what I read, Dreambox does not know PMT PID (and it cannot be entered manually) and neither does it know the channel is scrambled.
Is there a way to force decryption?
I hope the whole picture will be clearer when I provide some logs on Tuesday.
Thanks.
PS. Below is a screenshot from TS Analyzer I found on the internet. It was made when PMT was not scrambled:
Is there a way to force decryption?
I hope the whole picture will be clearer when I provide some logs on Tuesday.
Thanks.
PS. Below is a screenshot from TS Analyzer I found on the internet. It was made when PMT was not scrambled:
Attached Files
-
27W_11495V_PMT.png 89.02KB
178 downloads
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #25
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 2 December 2012 - 14:43
that screenshot does not show any ca descriptors, so it doesn't help much
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #26
-
- Senior Member
- 2,621 posts
+30
Good
Posted 4 December 2012 - 10:18
It looks like PMT is not scrambled at the moment and it is possible to receive these channels with DM800se using a proper softcam.
I might provide some logs later if it still makes sense in this situation.
Also, I might provide some dvbsnoop outputs if you are interested.
But as I said, it might be more meaningful if all the logs and dvbsnoop output information was sampled when PMT is scrambled.
I might provide some logs later if it still makes sense in this situation.
Also, I might provide some dvbsnoop outputs if you are interested.
But as I said, it might be more meaningful if all the logs and dvbsnoop output information was sampled when PMT is scrambled.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #27
-
- Senior Member
- 2,621 posts
+30
Good
Posted 4 December 2012 - 21:20
Here are some logs and dvbsnoop output files:
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
16384k video mem
- double buffering available!
9184kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x6ee928 12288 bytes, stride 192
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
PYTHONPATH: /usr/lib/enigma2/python
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox remote control (native)" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a remotecontrol
Input device "dreambox ir keyboard" is a keyboard
Input device "dreambox ir mouse" is a mouse
Found 5 input devices!
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 12396 services
scanning for frontends..
opening frontend 0
detected satellite frontend
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3
Use valid Linux Time <img src='http://openpli.org/forums/public/style_emoticons/<#EMO_DIR#>/smile.png' class='bbc_emoticon' alt=':)' /> (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
found 4 spinner!
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
/proc/stb/frontend/0/lnb_sense is 2
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4505, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: positioner
Add sat 30
Add sat 48
Add sat 70
Add sat 90
Add sat 100
Add sat 130
Add sat 160
Add sat 170
Add sat 192
Add sat 216
Add sat 235
Add sat 255
Add sat 260
Add sat 282
Add sat 305
Add sat 310
Add sat 315
Add sat 330
Add sat 360
Add sat 390
Add sat 420
Add sat 450
Add sat 3300
Add sat 3325
Add sat 3355
Add sat 3380
Add sat 3400
Add sat 3420
Add sat 3450
Add sat 3475
Add sat 3490
Add sat 3520
Add sat 3530
Add sat 3550
Add sat 3560
Add sat 3592
sec config completed
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 1
411 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 404
88 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 492
123 entries in Bouquet userbouquet.dbe00.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 605
77 entries in Bouquet userbouquet.dbe0b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0a.tv 682
42 entries in Bouquet userbouquet.dbe0a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 724
208 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 924
100 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0c.tv 1014
43 entries in Bouquet userbouquet.dbe0c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0d.tv 1050
280 entries in Bouquet userbouquet.dbe0d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 1317
218 entries in Bouquet userbouquet.dbe08.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0e.tv 1521
144 entries in Bouquet userbouquet.dbe0e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1654
47 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 1696
48 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 1738
33 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 1770
2 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1770
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 1770
43 entries in Bouquet userbouquet.LastScanned.tv
17 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 1
12 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe03.radio 13
62 entries in Bouquet userbouquet.dbe03.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 75
0 entries in Bouquet userbouquet.favourites.radio
3 entries in Bouquet bouquets.radio
/usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[FONT] adding font /usr/share/fonts/nmsbd.ttf...executing main
OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
Unknown device type: dreambox front panel
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Polski
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
setLCDBrightness 127
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[IMDb] fallback to default translation for Query details from the Internet Movie Database
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for setup for Quickbutton
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
setMode - port: Scart mode: PAL rate: 50Hz
-> setting aspect, policy, policy2, wss any bestfit policy auto
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> applying pep values
[EPGImport] autostart (0) occured at 1354577164.19
starting hotplug handler
[TIMER] record time changed, start prepare is now: Tue Dec 4 00:36:40 2012
[Timer] Record RecordTimerEntry(name=Alan Carr: Chatty Man, begin=Tue Dec 4 00:37:00 2012, serviceref=1:0:1:2F03:7F8:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Tue Dec 4 23:46:40 2012
[Timer] Record RecordTimerEntry(name=Celebrity Juice, begin=Tue Dec 4 23:47:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 00:36:40 2012
[Timer] Record RecordTimerEntry(name=Celebrity Juice: Girls on Top Special, begin=Wed Dec 5 00:37:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 03:41:40 2012
[Timer] Record RecordTimerEntry(name=Prawdziwy seks: Dobrze było?, begin=Wed Dec 5 03:42:00 2012, serviceref=1:0:1:C21:1E78:71:820000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 11:16:40 2012
[Timer] Record RecordTimerEntry(name=Żelazna Dama, begin=Wed Dec 5 11:17:00 2012, serviceref=1:0:1:C21:1E78:71:820000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Thu Dec 6 20:56:40 2012
[Timer] Record RecordTimerEntry(name=The X Factor USA, begin=Thu Dec 6 20:57:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Thu Dec 6 22:56:40 2012
[Timer] Record RecordTimerEntry(name=Celebrity Juice, begin=Thu Dec 6 22:57:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sat Dec 8 04:21:40 2012
[Timer] Record RecordTimerEntry(name=Tyranozaur, begin=Sat Dec 8 04:22:00 2012, serviceref=1:0:1:3B67:12C:13E:820000:0:0:0:, justplay=0)
[EPGImport] autostart (0) occured at 1354577164.5
[EPGImport] WakeUpTime now set to 1354607100 (now=1354577164)
[ShowClock Ver. 0.5] DateToText converter not installed: No module named DateToText
[SKIN] Parsing embedded skin <embedded-in-'ShowClock'>
[Toplevel.importExternalModules] Could NOT import external module: AutoTimer
[Toplevel.importExternalModules] Exception Caught
No module named AutoTimer.AutoTimerResource
[Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
[Toplevel.importExternalModules] Exception Caught
No module named EPGRefresh.EPGRefreshResource
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface] started on 0.0.0.0:88 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[Webinterface] started on 127.0.0.1:80 auth=False ssl=False
[WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
[Quickbutton] fallback to default translation for Assign plugin to long green key pressed
[Quickbutton] fallback to default translation for Assign plugin to long yellow key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long blue key pressed
RemovePopup, id = ZapError
setValue 60
cannot open /proc/stb/audio/j1_mute(No such file or directory)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 60 60 (raw)
Setvolume: 26 26 (-1db)
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
playing 1:0:19:4484:1000:1:CFDACE7:0:0:0:
main thread is non-idle! display spinner!
[EPGC] 194838 events read from /hdd/epg.dat
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 1000:0001
opening frontend 0
(0)tune
Entry for 332,5? not in Rotor Table found... i try gotoXX?
siteLatitude = 49.682999, siteLongitude = 21.783001, 332.500000 degrees
PolarmountHourAngle=233.793418
RotorCmd = d35d
RotorCmd d35d, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11495000 Pol 1 SR 44100000 INV 2 FEC 9 orbpos 3325 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1745 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4484:1000:1:CFDACE7:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
[SEC] set static current limiting
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 100, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 100, 17], 'up': True, 'mac': '00:09:34:2b:b4:b5', 'dhcp': True, 'bcast': [192, 168, 100, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 100, 1]}}
[OpenWebif] started on 82
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
set sequence pos 3
[SEC] setVoltage 2
[SEC] sleep 900ms
set sequence pos 9
/proc/stb/frontend/0/lnb_sense is 128
[SEC] idleInputpower[1] is 128
/proc/stb/frontend/0/lnb_sense is 131
measure idle(1) was not okay.. (128 - 131 = 3) retry
set sequence pos -2
[SEC] sleep 500ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] idleInputpower[1] is 128
/proc/stb/frontend/0/lnb_sense is 131
measure idle(1) was not okay.. (128 - 131 = 3) retry
set sequence pos -2
[SEC] sleep 500ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] idleInputpower[1] is 128
/proc/stb/frontend/0/lnb_sense is 128
[SEC] setVoltage 1
[SEC] sleep 500ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] idleInputpower[0] is 128
/proc/stb/frontend/0/lnb_sense is 128
[SEC] set rotor retries 1
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ed35d
[SEC] set timeout 40
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 125
[SEC] runningInputpower is 125
[SEC] waiting for rotor running 125, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 125
[SEC] runningInputpower is 125
[SEC] waiting for rotor running 125, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 128
[SEC] runningInputpower is 128
[SEC] waiting for rotor running 128, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
set sequence pos -4
[SEC] sleep 50ms
/proc/stb/frontend/0/lnb_sense is 131
[SEC] runningInputpower is 131
[SEC] waiting for rotor running 131, idle 128, delta 50
[SEC] rotor not running... reset counter.. increase timeout
[SEC] rotor timout
set sequence pos 2
[SEC] no more rotor retrys
set sequence pos 10
[SEC] update current rotorparams 0 d35d 3325
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 0, inversion off, m_tuning 3
(0)fe event: status 1f, inversion off, m_tuning 4
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1948920 running
[eEPGCache] channel 0x1948920 running
stop release channel timer
[EPGC] next update in 2 sec
ok ... now we start!!
PATready
use pmtpid 19c8 for service_id 4484
eventNewProgramInfo 0 0
dvb subtitle PID 19cd with wrong subtitling type (14)... force 0x10!!
have 1 video stream(s) (19c9), and 2 audio stream(s) (19ca, 19ce), and the pcr pid is 19c9, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=6601, apid=6602
DMX_SET_PES_FILTER(0x19c9) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x19ca) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(9) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x19c9) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
dvb subtitle PID 19cd with wrong subtitling type (14)... force 0x10!!
start dvb subtitles on pid 0x19cd with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
TuxTxt cache cleared
got new subtitle page 7204772306 477010832
start subtitle delay 1634
VIDEO_GET_EVENT - ok
sdt update done!
[EPGC] start caching events(1354577187)
start subtitle delay 994
got new subtitle page 477011290 477192592
display dvb subtitle Page 477010832
setPage
add 0 992 1920 58
disp width 1920, disp height 1080
start subtitle delay 2014
display dvb subtitle Page 477192592
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 477320890 477518352
start subtitle delay 2194
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
display dvb subtitle Page 477518352
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 477612490 477863056
start subtitle delay 2784
got new subtitle page 477821290 478040336
start subtitle delay 464
start subtitle delay 24
display dvb subtitle Page 477863056
setPage
add 0 992 1920 58
disp width 1920, disp height 1080
start subtitle delay 1953
got new subtitle page 478030090 478236560
start subtitle delay 113
display dvb subtitle Page 478040336
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
start subtitle delay 2174
display dvb subtitle Page 478236560
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 478321690 478510224
start subtitle delay 2094
display dvb subtitle Page 478510224
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 478573690 478785552
start subtitle delay 2354
display dvb subtitle Page 478785552
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 478829290 479074448
start subtitle delay 2723
display dvb subtitle Page 479074448
setPage
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 479102890 479297680
start subtitle delay 2164
VIDEO_GET_EVENT - ok
display dvb subtitle Page 479297680
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 479542090 479673872
start subtitle delay 1464
start subtitle delay 24
display dvb subtitle Page 479673872
setPage
add 0 876 1920 58
disp width 1920, disp height 1080
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 479948890 480156304
start subtitle delay 2304
start subtitle delay 24
display dvb subtitle Page 480156304
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 480236890 480488336
start subtitle delay 2793
got new subtitle page 480420490 480659344
start subtitle delay 753
display dvb subtitle Page 480488336
setPage
add 0 992 1920 58
disp width 1920, disp height 1080
start subtitle delay 1893
VIDEO_GET_EVENT - ok
got new subtitle page 480600490 480853776
start subtitle delay 653
display dvb subtitle Page 480659344
setPage
add 0 992 1920 58
disp width 1920, disp height 1080
start subtitle delay 2174
VIDEO_GET_EVENT - ok
display dvb subtitle Page 480853776
setPage
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 480920890 481125520
start subtitle delay 2273
display dvb subtitle Page 481125520
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 481349290 481546768
start subtitle delay 2194
display dvb subtitle Page 481546768
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 481702090 481918480
start subtitle delay 2404
display dvb subtitle Page 481918480
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
got new subtitle page 482076490 482290192
start subtitle delay 2374
display dvb subtitle Page 482290192
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
action -> InfobarChannelSelection openServiceList
got new subtitle page 482454490 482718608
start subtitle delay 2934
display dvb subtitle Page 482718608
setPage
add 0 992 1920 58
disp width 1920, disp height 1080
action -> OkCancelActions ok
playing 1:0:1:11C0:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:11C0:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 0190 for service_id 11c0
eventNewProgramInfo 0 0
have 1 video stream(s) (0191), and 2 audio stream(s) (0192, 0196), and the pcr pid is 0191, and the text pid is ffffffff
decoder state: play, vpid=401, apid=402
DMX_SET_PES_FILTER(0x191) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x192) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x191) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x0195 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:11C0:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:11C0:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
got new subtitle page 7216396706 7216560528
start subtitle delay 1820
action -> InfobarChannelSelection zapDown
playing 1:0:19:4440:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:11C0:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:11C0:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4440:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 17d4 for service_id 4440
eventNewProgramInfo 0 0
dvb subtitle PID 17d9 with wrong subtitling type (14)... force 0x10!!
have 1 video stream(s) (17d5), and 2 audio stream(s) (17d6, 17da), and the pcr pid is 17d5, and the text pid is ffffffff
decoder state: play, vpid=6101, apid=6102
DMX_SET_PES_FILTER(0x17d5) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x17d6) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(9) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x17d5) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
dvb subtitle PID 17d9 with wrong subtitling type (14)... force 0x10!!
start dvb subtitles on pid 0x17d9 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:4440:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4440:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
got new subtitle page 614072900 614308368
start subtitle delay 2616
VIDEO_GET_EVENT - ok
start subtitle delay 456
action -> InfobarChannelSelection zapDown
playing 1:0:1:1100:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:4440:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:19:4440:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1100:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 01f4 for service_id 1100
eventNewProgramInfo 0 0
have 1 video stream(s) (01f5), and 1 audio stream(s) (01f6), and the pcr pid is 01f5, and the text pid is ffffffff
decoder state: play, vpid=501, apid=502
DMX_SET_PES_FILTER(0x1f5) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x1f6) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x1f5) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x01f9 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:1100:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1100:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
action -> InfobarChannelSelection zapDown
playing 1:0:1:1044:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:1100:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:1100:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1044:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 0064 for service_id 1044
eventNewProgramInfo 0 0
have 1 video stream(s) (0065), and 2 audio stream(s) (0066, 006a), and the pcr pid is 0065, and the text pid is ffffffff
decoder state: play, vpid=101, apid=102
DMX_SET_PES_FILTER(0x65) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x66) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x65) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x0069 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
got new subtitle page 7217318200 7176296464
display dvb subtitle Page 7176296464
setPage
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
got new subtitle page 7176196808 7176300048
start subtitle delay 1147
start subtitle delay 307
start subtitle delay 27
display dvb subtitle Page 7176300048
setPage
add 0 474 720 36
disp width 720, disp height 576
add 0 510 720 36
disp width 720, disp height 576
action -> InfobarChannelSelection zapDown
playing 1:0:19:4484:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4484:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (19c9), and 0 audio stream(s), and the pcr pid is 19c9, and the text pid is ffffffff
decoder state: play, vpid=6601, apid=-1
DMX_SET_PES_FILTER(0x19c9) - pcr - ok
DEMUX_START - pcr - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x19c9) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x19cd with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
PATready
use pmtpid 19c8 for service_id 4484
eventNewProgramInfo 0 0
dvb subtitle PID 19cd with wrong subtitling type (14)... force 0x10!!
have 1 video stream(s) (19c9), and 2 audio stream(s) (19ca, 19ce), and the pcr pid is 19c9, and the text pid is ffffffff
decoder state: play, vpid=6601, apid=6602
DMX_SET_PES_FILTER(0x19ca) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(9) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
dvb subtitle PID 19cd with wrong subtitling type (14)... force 0x10!!
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
got new subtitle page 484708090 484902032
start subtitle delay 2154
action -> InfobarChannelSelection zapDown
playing 1:0:1:107D:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:107D:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 13ec for service_id 107d
eventNewProgramInfo 0 0
have 1 video stream(s) (13ed), and 2 audio stream(s) (13ee, 13f2), and the pcr pid is 13ed, and the text pid is ffffffff
decoder state: play, vpid=5101, apid=5102
DMX_SET_PES_FILTER(0x13ed) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x13ee) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x13ed) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x13f1 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:107D:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:107D:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
got new subtitle page 484819690 7176995344
display dvb subtitle Page 7176995344
setPage
add 0 510 720 36
disp width 720, disp height 576
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
action -> InfobarChannelSelection zapDown
playing 1:0:1:107C:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:107D:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:107D:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:107C:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 1004 for service_id 107c
eventNewProgramInfo 0 0
have 1 video stream(s) (1005), and 2 audio stream(s) (1006, 100a), and the pcr pid is 1005, and the text pid is ffffffff
decoder state: play, vpid=4101, apid=4102
DMX_SET_PES_FILTER(0x1005) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x1006) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x1005) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x1009 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:107C:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:107C:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
got new subtitle page 7177279486 7177445008
start subtitle delay 1839
action -> InfobarChannelSelection zapDown
playing 1:0:1:107E:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:107C:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:107C:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:107E:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 0c1c for service_id 107e
eventNewProgramInfo 0 0
have 1 video stream(s) (0c1d), and 2 audio stream(s) (0c1e, 0c22), and the pcr pid is 0c1d, and the text pid is ffffffff
decoder state: play, vpid=3101, apid=3102
DMX_SET_PES_FILTER(0xc1d) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0xc1e) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xc1d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x0c21 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:107E:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:107E:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
[ePopen] command: ('hdparm', 'hdparm', '-y', '/dev/sda')
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
action -> InfobarChannelSelection zapDown
playing 1:0:1:1280:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:107E:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:107E:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1280:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 0258 for service_id 1280
eventNewProgramInfo 0 0
have 1 video stream(s) (0259), and 1 audio stream(s) (025a), and the pcr pid is 0259, and the text pid is ffffffff
decoder state: play, vpid=601, apid=602
DMX_SET_PES_FILTER(0x259) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x25a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x259) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x025d with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:1280:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1280:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
got new subtitle page 7219034384 7219185424
start subtitle delay 1678
action -> InfobarChannelSelection openServiceList
start subtitle delay 398
got new subtitle page 7219181984 7219341200
start subtitle delay 38
display dvb subtitle Page 7219185424
setPage
add 0 510 720 36
disp width 720, disp height 576
start subtitle delay 1729
got new subtitle page 7219307984 7219472528
start subtitle delay 369
display dvb subtitle Page 7219341200
setPage
add 0 474 720 36
disp width 720, disp height 576
add 0 510 720 36
disp width 720, disp height 576
start subtitle delay 1468
action -> OkCancelActions ok
playing 1:0:1:10C0:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:1280:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:1280:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:10C0:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 012c for service_id 10c0
eventNewProgramInfo 0 0
have 1 video stream(s) (012d), and 2 audio stream(s) (012e, 0132), and the pcr pid is 012d, and the text pid is ffffffff
decoder state: play, vpid=301, apid=302
DMX_SET_PES_FILTER(0x12d) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x12e) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x12d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x0131 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:10C0:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:10C0:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
got new subtitle page 7219546436 7219704720
start subtitle delay 1758
start subtitle delay 518
display dvb subtitle Page 7219704720
setPage
action -> InfobarChannelSelection zapDown
playing 1:0:1:10BF:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:10C0:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:10C0:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:10BF:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 00c8 for service_id 10bf
eventNewProgramInfo 0 0
have 1 video stream(s) (00c9), and 2 audio stream(s) (00ca, 00ce), and the pcr pid is 00c9, and the text pid is ffffffff
decoder state: play, vpid=201, apid=202
DMX_SET_PES_FILTER(0xc9) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0xca) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xc9) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x00cd with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:10BF:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:10BF:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
got new subtitle page 7219896822 7220071696
start subtitle delay 1943
action -> InfobarChannelSelection openServiceList
display dvb subtitle Page 7220071696
setPage
add 0 474 720 36
disp width 720, disp height 576
add 0 510 720 36
disp width 720, disp height 576
got new subtitle page 7220134422 7220303888
start subtitle delay 1882
display dvb subtitle Page 7220303888
setPage
add 0 474 720 36
disp width 720, disp height 576
add 0 510 720 36
disp width 720, disp height 576
action -> OkCancelActions cancel
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
got new subtitle page 7220390022 7220556816
start subtitle delay 1853
action -> InfobarChannelSelection zapDown
playing 1:0:1:1200:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:10BF:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:10BF:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1200:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 02bc for service_id 1200
eventNewProgramInfo 0 0
have 0 video stream(s), and 0 audio stream(s), and the pcr pid is 1fff, and the text pid is ffffffff
PES filter: DMX_SET_PES_FILTER - Invalid argument
decoder state: play, vpid=-1, apid=-1
disable teletext subtitles
[eDVBCAService] new service 1:0:1:1200:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1200:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
action -> InfobarChannelSelection zapDown
playing 1:0:1:1240:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:1200:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:1200:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1240:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 0320 for service_id 1240
eventNewProgramInfo 0 0
have 0 video stream(s), and 0 audio stream(s), and the pcr pid is 1fff, and the text pid is ffffffff
PES filter: DMX_SET_PES_FILTER - Invalid argument
decoder state: play, vpid=-1, apid=-1
disable teletext subtitles
[eDVBCAService] new service 1:0:1:1240:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1240:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
action -> InfobarChannelSelection zapDown
playing 1:0:19:4500:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:1240:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:1240:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4500:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 189c for service_id 4500
eventNewProgramInfo 0 0
dvb subtitle PID 18a1 with wrong subtitling type (14)... force 0x10!!
have 1 video stream(s) (189d), and 2 audio stream(s) (189e, 18a2), and the pcr pid is 189d, and the text pid is ffffffff
decoder state: play, vpid=6301, apid=6302
DMX_SET_PES_FILTER(0x189d) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x189e) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(9) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x189d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
dvb subtitle PID 18a1 with wrong subtitling type (14)... force 0x10!!
start dvb subtitles on pid 0x18a1 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:4500:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4500:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
got new subtitle page 530598712 530808720
start subtitle delay 2333
action -> InfobarChannelSelection zapDown
playing 1:0:19:44C8:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:4500:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:19:4500:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:44C8:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 1838 for service_id 44c8
eventNewProgramInfo 0 0
dvb subtitle PID 183d with wrong subtitling type (14)... force 0x10!!
have 1 video stream(s) (1839), and 2 audio stream(s) (183a, 183e), and the pcr pid is 1839, and the text pid is ffffffff
decoder state: play, vpid=6201, apid=6202
DMX_SET_PES_FILTER(0x1839) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x183a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(9) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x1839) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
dvb subtitle PID 183d with wrong subtitling type (14)... force 0x10!!
start dvb subtitles on pid 0x183d with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:44C8:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:44C8:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
got new subtitle page 530753512 574191248
display dvb subtitle Page 574191248
setPage
VIDEO_GET_EVENT - ok
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
got new subtitle page 574100754 574360464
start subtitle delay 2845
action -> InfobarChannelSelection openServiceList
got new subtitle page 574298754 574501776
start subtitle delay 685
display dvb subtitle Page 574360464
setPage
add 0 992 1920 58
disp width 1920, disp height 1080
start subtitle delay 1575
action -> OkCancelActions cancel
display dvb subtitle Page 574501776
setPage
add 0 934 1920 58
disp width 1920, disp height 1080
add 0 992 1920 58
disp width 1920, disp height 1080
action -> InfobarChannelSelection zapDown
playing 1:0:19:4580:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:44C8:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:19:44C8:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4580:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 1900 for service_id 4580
eventNewProgramInfo 0 0
dvb subtitle PID 1905 with wrong subtitling type (14)... force 0x10!!
dvb subtitle PID 1907 with wrong subtitling type (14)... force 0x10!!
have 1 video stream(s) (1901), and 3 audio stream(s) (1902, 1903, 1906), and the pcr pid is 1fff, and the text pid is ffffffff
decoder state: play, vpid=6401, apid=6403
DMX_SET_PES_FILTER(0x1903) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(9) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x1901) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
dvb subtitle PID 1905 with wrong subtitling type (14)... force 0x10!!
dvb subtitle PID 1907 with wrong subtitling type (14)... force 0x10!!
start dvb subtitles on pid 0x1905 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:4580:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4580:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
action -> InfobarChannelSelection zapDown
playing 1:0:19:45C0:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:4580:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:19:4580:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:45C0:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 1964 for service_id 45c0
eventNewProgramInfo 0 0
dvb subtitle PID 1969 with wrong subtitling type (14)... force 0x10!!
have 1 video stream(s) (1965), and 2 audio stream(s) (1966, 196a), and the pcr pid is 1fff, and the text pid is ffffffff
decoder state: play, vpid=6501, apid=6502
DMX_SET_PES_FILTER(0x1966) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(9) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x1965) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
dvb subtitle PID 1969 with wrong subtitling type (14)... force 0x10!!
start dvb subtitles on pid 0x1969 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:45C0:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:45C0:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
action -> InfobarChannelSelection zapDown
playing 1:0:1:4F40:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:45C0:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:19:45C0:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:4F40:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 1af4 for service_id 4f40
eventNewProgramInfo 0 0
have 0 video stream(s), and 0 audio stream(s), and the pcr pid is 1fff, and the text pid is ffffffff
PES filter: DMX_SET_PES_FILTER - Invalid argument
decoder state: play, vpid=-1, apid=-1
disable teletext subtitles
[eDVBCAService] new service 1:0:1:4F40:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:4F40:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
action -> InfobarChannelSelection zapDown
playing 1:0:19:4E80:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:4F40:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:4F40:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4E80:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 1a90 for service_id 4e80
eventNewProgramInfo 0 0
dvb subtitle PID 1a95 with wrong subtitling type (14)... force 0x10!!
have 1 video stream(s) (1a91), and 2 audio stream(s) (1a92, 1a96), and the pcr pid is 1a91, and the text pid is ffffffff
decoder state: play, vpid=6801, apid=6802
DMX_SET_PES_FILTER(0x1a91) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x1a92) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(9) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x1a91) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
dvb subtitle PID 1a95 with wrong subtitling type (14)... force 0x10!!
start dvb subtitles on pid 0x1a95 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:4E80:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4E80:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
action -> InfobarChannelSelection zapDown
playing 1:0:1:1C00:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:4E80:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:19:4E80:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1C00:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 0384 for service_id 1c00
eventNewProgramInfo 0 0
have 1 video stream(s) (0385), and 2 audio stream(s) (03b7, 03b8), and the pcr pid is 0385, and the text pid is ffffffff
decoder state: play, vpid=901, apid=951
DMX_SET_PES_FILTER(0x385) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x3b7) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x385) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
[eDVBCAService] new service 1:0:1:1C00:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1C00:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
action -> InfobarChannelSelection zapDown
playing 1:0:1:1C40:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:1C00:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:1C00:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1C40:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
PATready
use pmtpid 0b54 for service_id 1c40
eventNewProgramInfo 0 0
have 0 video stream(s), and 0 audio stream(s), and the pcr pid is 1fff, and the text pid is ffffffff
PES filter: DMX_SET_PES_FILTER - Invalid argument
decoder state: play, vpid=-1, apid=-1
disable teletext subtitles
[eDVBCAService] new service 1:0:1:1C40:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1C40:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
action -> InfobarChannelSelection openServiceList
action -> OkCancelActions cancel
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
action -> OkCancelActions ok
okbuttonClick
key_red_choice: 0
action -> OkCancelActions cancel
action -> OkCancelActions cancel
action -> InfobarShowHideActions hide
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #28
-
- Senior Member
- 2,621 posts
+30
Good
Posted 4 December 2012 - 21:20
root@dm800se:~# dvbsnoop -s pidscan dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/ --------------------------------------------------------- Transponder PID-Scan... --------------------------------------------------------- PID found: 0 (0x0000) [SECTION: Program Association Table (PAT)] PID found: 16 (0x0010) [SECTION: Network Information Table (NIT) - actual net work] PID found: 17 (0x0011) [SECTION: Service Description Table (SDT) - actual tra nsport stream] PID found: 18 (0x0012) [SECTION: Event Information Table (EIT) - actual trans port stream, present/following] PID found: 20 (0x0014) [SECTION: Time Date Table (TDT)] PID found: 32 (0x0020) [scrambled] PID found: 33 (0x0021) [SECTION: Program Map Table (PMT)] PID found: 50 (0x0032) [SECTION: Program Map Table (PMT)] PID found: 56 (0x0038) [scrambled] PID found: 57 (0x0039) [scrambled] PID found: 58 (0x003a) [scrambled] PID found: 60 (0x003c) [scrambled] PID found: 100 (0x0064) [SECTION: Program Map Table (PMT)] PID found: 101 (0x0065) [scrambled] PID found: 102 (0x0066) [scrambled] PID found: 105 (0x0069) [scrambled] PID found: 200 (0x00c8) [SECTION: Program Map Table (PMT)] PID found: 201 (0x00c9) [scrambled] PID found: 202 (0x00ca) [scrambled] PID found: 205 (0x00cd) [scrambled] PID found: 210 (0x00d2) [scrambled] PID found: 300 (0x012c) [SECTION: Program Map Table (PMT)] PID found: 301 (0x012d) [scrambled] PID found: 302 (0x012e) [scrambled] PID found: 305 (0x0131) [scrambled] PID found: 310 (0x0136) [scrambled] PID found: 400 (0x0190) [SECTION: Program Map Table (PMT)] PID found: 401 (0x0191) [scrambled] PID found: 402 (0x0192) [scrambled] PID found: 405 (0x0195) [scrambled] PID found: 406 (0x0196) [scrambled] PID found: 410 (0x019a) [scrambled] PID found: 411 (0x019b) [scrambled] PID found: 500 (0x01f4) [SECTION: Program Map Table (PMT)] PID found: 501 (0x01f5) [scrambled] PID found: 502 (0x01f6) [scrambled] PID found: 505 (0x01f9) [scrambled] PID found: 510 (0x01fe) [scrambled] PID found: 600 (0x0258) [SECTION: Program Map Table (PMT)] PID found: 601 (0x0259) [scrambled] PID found: 602 (0x025a) [scrambled] PID found: 605 (0x025d) [scrambled] PID found: 610 (0x0262) [scrambled] PID found: 700 (0x02bc) [SECTION: Program Map Table (PMT)] PID found: 710 (0x02c6) [scrambled] PID found: 711 (0x02c7) [scrambled] PID found: 800 (0x0320) [SECTION: Program Map Table (PMT)] PID found: 810 (0x032a) [scrambled] PID found: 811 (0x032b) [scrambled] PID found: 900 (0x0384) [SECTION: Program Map Table (PMT)] PID found: 901 (0x0385) [scrambled] PID found: 910 (0x038e) [scrambled] PID found: 951 (0x03b7) [scrambled] PID found: 952 (0x03b8) [scrambled] PID found: 1000 (0x03e8) [SECTION: Program Map Table (PMT)] PID found: 1002 (0x03ea) [scrambled] PID found: 1100 (0x044c) [SECTION: Program Map Table (PMT)] PID found: 1102 (0x044e) [scrambled] PID found: 1200 (0x04b0) [SECTION: Program Map Table (PMT)] PID found: 1202 (0x04b2) [scrambled] PID found: 1300 (0x0514) [SECTION: Program Map Table (PMT)] PID found: 1302 (0x0516) [scrambled] PID found: 1400 (0x0578) [SECTION: Program Map Table (PMT)] PID found: 1402 (0x057a) [scrambled] PID found: 1500 (0x05dc) [SECTION: Program Map Table (PMT)] PID found: 1502 (0x05de) [scrambled] PID found: 1600 (0x0640) [SECTION: Program Map Table (PMT)] PID found: 1602 (0x0642) [scrambled] PID found: 1700 (0x06a4) [SECTION: Program Map Table (PMT)] PID found: 1702 (0x06a6) [scrambled] PID found: 1800 (0x0708) [SECTION: Program Map Table (PMT)] PID found: 1802 (0x070a) [scrambled] PID found: 1900 (0x076c) [SECTION: Program Map Table (PMT)] PID found: 1902 (0x076e) [scrambled] PID found: 2000 (0x07d0) [SECTION: Program Map Table (PMT)] PID found: 2002 (0x07d2) [scrambled] PID found: 2100 (0x0834) [SECTION: Program Map Table (PMT)] PID found: 2200 (0x0898) [SECTION: Program Map Table (PMT)] PID found: 2300 (0x08fc) [SECTION: Program Map Table (PMT)] PID found: 2400 (0x0960) [SECTION: Program Map Table (PMT)] PID found: 2500 (0x09c4) [SECTION: Program Map Table (PMT)] PID found: 2600 (0x0a28) [SECTION: Program Map Table (PMT)] PID found: 2700 (0x0a8c) [SECTION: Program Map Table (PMT)] PID found: 2800 (0x0af0) [SECTION: Program Map Table (PMT)] PID found: 2900 (0x0b54) [SECTION: Program Map Table (PMT)] PID found: 2911 (0x0b5f) [scrambled] PID found: 3100 (0x0c1c) [SECTION: Program Map Table (PMT)] PID found: 3101 (0x0c1d) [scrambled] PID found: 3102 (0x0c1e) [scrambled] PID found: 3105 (0x0c21) [scrambled] PID found: 4100 (0x1004) [SECTION: Program Map Table (PMT)] PID found: 4101 (0x1005) [scrambled] PID found: 4102 (0x1006) [scrambled] PID found: 4105 (0x1009) [scrambled] PID found: 5100 (0x13ec) [SECTION: Program Map Table (PMT)] PID found: 5101 (0x13ed) [scrambled] PID found: 5102 (0x13ee) [scrambled] PID found: 5105 (0x13f1) [scrambled] PID found: 6100 (0x17d4) [SECTION: Program Map Table (PMT)] PID found: 6101 (0x17d5) [scrambled] PID found: 6102 (0x17d6) [scrambled] PID found: 6105 (0x17d9) [scrambled] PID found: 6106 (0x17da) [scrambled] PID found: 6130 (0x17f2) [scrambled] PID found: 6200 (0x1838) [SECTION: Program Map Table (PMT)] PID found: 6201 (0x1839) [scrambled] PID found: 6202 (0x183a) [scrambled] PID found: 6205 (0x183d) [scrambled] PID found: 6206 (0x183e) [scrambled] PID found: 6300 (0x189c) [SECTION: Program Map Table (PMT)] PID found: 6301 (0x189d) [scrambled] PID found: 6302 (0x189e) [scrambled] PID found: 6305 (0x18a1) [scrambled] PID found: 6306 (0x18a2) [scrambled] PID found: 6400 (0x1900) [SECTION: Program Map Table (PMT)] PID found: 6500 (0x1964) [SECTION: Program Map Table (PMT)] PID found: 6600 (0x19c8) [SECTION: Program Map Table (PMT)] PID found: 6601 (0x19c9) [scrambled] PID found: 6602 (0x19ca) [scrambled] PID found: 6605 (0x19cd) [scrambled] PID found: 6606 (0x19ce) [scrambled] PID found: 6650 (0x19fa) [scrambled] PID found: 6700 (0x1a2c) [SECTION: Program Map Table (PMT)] PID found: 6701 (0x1a2d) [scrambled] PID found: 6702 (0x1a2e) [scrambled] PID found: 6800 (0x1a90) [SECTION: Program Map Table (PMT)] PID found: 6900 (0x1af4) [SECTION: Program Map Table (PMT)] PID found: 6910 (0x1afe) [scrambled] PID found: 7201 (0x1c21) [scrambled] PID found: 7202 (0x1c22) [scrambled] PID found: 7203 (0x1c23) [scrambled] PID found: 7204 (0x1c24) [scrambled] PID found: 7205 (0x1c25) [scrambled] PID found: 7310 (0x1c8e) [scrambled] root@dm800se:~#
OpenEmbedded Linux dm800se
openpli 2.1 dm800se
dm800se login: root
root@dm800se:~# dvbsnoop -n 1 -nph 0x0000
dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/
------------------------------------------------------------
SECT-Packet: 00000001 PID: 0 (0x0000), Length: 188 (0x00bc)
Time received: Tue 2012-12-04 15:24:22.254
------------------------------------------------------------
PID: 0 (0x0000) [= assigned for: ISO 13818-1 Program Association Table (PAT)]
Guess table from table id...
PAT-decoding....
Table_ID: 0 (0x00) [= Program Association Table (PAT)]
section_syntax_indicator: 1 (0x01)
(fixed): 0 (0x00)
reserved_1: 3 (0x03)
Section_length: 185 (0x00b9)
Transport_Stream_ID: 4096 (0x1000)
reserved_2: 3 (0x03)
Version_number: 6 (0x06)
current_next_indicator: 1 (0x01) [= valid now]
Section_number: 0 (0x00)
Last_Section_number: 0 (0x00)
Program_number: 0 (0x0000)
reserved: 7 (0x07)
Network_PID: 16 (0x0010)
Program_number: 3 (0x0003)
reserved: 7 (0x07)
Program_map_PID: 33 (0x0021)
Program_number: 50 (0x0032)
reserved: 7 (0x07)
Program_map_PID: 50 (0x0032)
Program_number: 4164 (0x1044)
reserved: 7 (0x07)
Program_map_PID: 100 (0x0064)
Program_number: 4220 (0x107c)
reserved: 7 (0x07)
Program_map_PID: 4100 (0x1004)
Program_number: 4221 (0x107d)
reserved: 7 (0x07)
Program_map_PID: 5100 (0x13ec)
Program_number: 4222 (0x107e)
reserved: 7 (0x07)
Program_map_PID: 3100 (0x0c1c)
Program_number: 4287 (0x10bf)
reserved: 7 (0x07)
Program_map_PID: 200 (0x00c8)
Program_number: 4288 (0x10c0)
reserved: 7 (0x07)
Program_map_PID: 300 (0x012c)
Program_number: 4352 (0x1100)
reserved: 7 (0x07)
Program_map_PID: 500 (0x01f4)
Program_number: 4416 (0x1140)
reserved: 7 (0x07)
Program_map_PID: 2700 (0x0a8c)
Program_number: 4544 (0x11c0)
reserved: 7 (0x07)
Program_map_PID: 400 (0x0190)
Program_number: 4608 (0x1200)
reserved: 7 (0x07)
Program_map_PID: 700 (0x02bc)
Program_number: 4672 (0x1240)
reserved: 7 (0x07)
Program_map_PID: 800 (0x0320)
Program_number: 4736 (0x1280)
reserved: 7 (0x07)
Program_map_PID: 600 (0x0258)
Program_number: 4860 (0x12fc)
reserved: 7 (0x07)
Program_map_PID: 2800 (0x0af0)
Program_number: 5632 (0x1600)
reserved: 7 (0x07)
Program_map_PID: 1400 (0x0578)
Program_number: 5696 (0x1640)
reserved: 7 (0x07)
Program_map_PID: 1500 (0x05dc)
Program_number: 5760 (0x1680)
reserved: 7 (0x07)
Program_map_PID: 1600 (0x0640)
Program_number: 5824 (0x16c0)
reserved: 7 (0x07)
Program_map_PID: 1700 (0x06a4)
Program_number: 5888 (0x1700)
reserved: 7 (0x07)
Program_map_PID: 1800 (0x0708)
Program_number: 5952 (0x1740)
reserved: 7 (0x07)
Program_map_PID: 1900 (0x076c)
Program_number: 6016 (0x1780)
reserved: 7 (0x07)
Program_map_PID: 2000 (0x07d0)
Program_number: 6204 (0x183c)
reserved: 7 (0x07)
Program_map_PID: 2300 (0x08fc)
Program_number: 6268 (0x187c)
reserved: 7 (0x07)
Program_map_PID: 2400 (0x0960)
Program_number: 6333 (0x18bd)
reserved: 7 (0x07)
Program_map_PID: 2500 (0x09c4)
Program_number: 6397 (0x18fd)
reserved: 7 (0x07)
Program_map_PID: 2600 (0x0a28)
Program_number: 6462 (0x193e)
reserved: 7 (0x07)
Program_map_PID: 2100 (0x0834)
Program_number: 6526 (0x197e)
reserved: 7 (0x07)
Program_map_PID: 2200 (0x0898)
Program_number: 6720 (0x1a40)
reserved: 7 (0x07)
Program_map_PID: 1000 (0x03e8)
Program_number: 6784 (0x1a80)
reserved: 7 (0x07)
Program_map_PID: 1100 (0x044c)
Program_number: 6848 (0x1ac0)
reserved: 7 (0x07)
Program_map_PID: 1200 (0x04b0)
Program_number: 6912 (0x1b00)
reserved: 7 (0x07)
Program_map_PID: 1300 (0x0514)
Program_number: 7168 (0x1c00)
reserved: 7 (0x07)
Program_map_PID: 900 (0x0384)
Program_number: 7232 (0x1c40)
reserved: 7 (0x07)
Program_map_PID: 2900 (0x0b54)
Program_number: 17472 (0x4440)
reserved: 7 (0x07)
Program_map_PID: 6100 (0x17d4)
Program_number: 17540 (0x4484)
reserved: 7 (0x07)
Program_map_PID: 6600 (0x19c8)
Program_number: 17608 (0x44c8)
reserved: 7 (0x07)
Program_map_PID: 6200 (0x1838)
Program_number: 17664 (0x4500)
reserved: 7 (0x07)
Program_map_PID: 6300 (0x189c)
Program_number: 17792 (0x4580)
reserved: 7 (0x07)
Program_map_PID: 6400 (0x1900)
Program_number: 17856 (0x45c0)
reserved: 7 (0x07)
Program_map_PID: 6500 (0x1964)
Program_number: 19648 (0x4cc0)
reserved: 7 (0x07)
Program_map_PID: 6700 (0x1a2c)
Program_number: 20096 (0x4e80)
reserved: 7 (0x07)
Program_map_PID: 6800 (0x1a90)
Program_number: 20288 (0x4f40)
reserved: 7 (0x07)
Program_map_PID: 6900 (0x1af4)
CRC: 1100096101 (0x41922265)
==========================================================
root@dm800se:~#
OpenEmbedded Linux dm800se
openpli 2.1 dm800se
dm800se login: root
root@dm800se:~# dvbsnoop -n 1 -nph 0x64
dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/
------------------------------------------------------------
SECT-Packet: 00000001 PID: 100 (0x0064), Length: 173 (0x00ad)
Time received: Tue 2012-12-04 14:50:27.501
------------------------------------------------------------
PID: 100 (0x0064)
Guess table from table id...
PMT-decoding....
Table_ID: 2 (0x02) [= Program Map Table (PMT)]
section_syntax_indicator: 1 (0x01)
(fixed '0'): 0 (0x00)
reserved_1: 3 (0x03)
Section_length: 170 (0x00aa)
Program_number: 4164 (0x1044)
reserved_2: 3 (0x03)
Version_number: 0 (0x00)
current_next_indicator: 1 (0x01) [= valid now]
Section_number: 0 (0x00)
Last_Section_number: 0 (0x00)
reserved_3: 7 (0x07)
PCR PID: 101 (0x0065)
reserved_4: 15 (0x0f)
Program_info_length: 0 (0x0000)
Stream_type loop:
Stream_type: 2 (0x02) [= ITU-T Rec. H.262 | ISO/IEC 13818-2 Video | ISO/IEC
11172-2 constr. parameter video stream]
reserved_1: 7 (0x07)
Elementary_PID: 101 (0x0065)
reserved_2: 15 (0x0f)
ES_info_length: 3 (0x0003)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 1 (0x01)
Stream_type: 3 (0x03) [= ISO/IEC 11172 Audio]
reserved_1: 7 (0x07)
Elementary_PID: 102 (0x0066)
reserved_2: 15 (0x0f)
ES_info_length: 13 (0x000d)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 2 (0x02)
MPEG-DescriptorTag: 10 (0x0a) [= ISO_639_language_descriptor]
descriptor_length: 4 (0x04)
ISO639_language_code: eng
Audio_type: 0 (0x00) [= undefined]
DVB-DescriptorTag: 127 (0x7f) [= extension_descriptor]
descriptor_length: 2 (0x02)
descriptor_tag_extension: 6 (0x06)
selector_bytes:
0000: 82 .
Stream_type: 3 (0x03) [= ISO/IEC 11172 Audio]
reserved_1: 7 (0x07)
Elementary_PID: 106 (0x006a)
reserved_2: 15 (0x0f)
ES_info_length: 13 (0x000d)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 6 (0x06)
MPEG-DescriptorTag: 10 (0x0a) [= ISO_639_language_descriptor]
descriptor_length: 4 (0x04)
ISO639_language_code: eng
Audio_type: 3 (0x03) [= visual impaired commentary]
DVB-DescriptorTag: 127 (0x7f) [= extension_descriptor]
descriptor_length: 2 (0x02)
descriptor_tag_extension: 6 (0x06)
selector_bytes:
0000: 06 .
Stream_type: 6 (0x06) [= ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets c
ontaining private data]
reserved_1: 7 (0x07)
Elementary_PID: 105 (0x0069)
reserved_2: 15 (0x0f)
ES_info_length: 13 (0x000d)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 5 (0x05)
DVB-DescriptorTag: 89 (0x59) [= subtitling_descriptor]
descriptor_length: 8 (0x08)
ISO639_language_code: eng
Subtitling_type: 16 (0x10) [= DVB subtitles (normal) with no mon
itor aspect ratio critical]
Composition_page_id: 1 (0x0001)
Ancillary_page_id: 1 (0x0001)
Stream_type: 5 (0x05) [= ITU-T Rec. H.222.0 | ISO/IEC 13818-1 private secti
ons]
reserved_1: 7 (0x07)
Elementary_PID: 150 (0x0096)
reserved_2: 15 (0x0f)
ES_info_length: 5 (0x0005)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 150 (0x96)
DVB-DescriptorTag: 116 (0x74) [= related_content_descriptor]
descriptor_length: 0 (0x00)
Stream_type: 11 (0x0b) [= ISO/IEC 13818-6 DSM-CC U-N Messages]
reserved_1: 7 (0x07)
Elementary_PID: 110 (0x006e)
reserved_2: 15 (0x0f)
ES_info_length: 24 (0x0018)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 110 (0x6e)
MPEG-DescriptorTag: 19 (0x13) [= carousel_identifier_descriptor]
descriptor_length: 5 (0x05)
Carousel_id: 1 (0x00000001)
format_id: 0 (0x00)
DVB-DescriptorTag: 102 (0x66) [= data_broadcast_id_descriptor]
descriptor_length: 12 (0x0c)
Data_broadcast_ID: 262 (0x0106) [= The Digital Network]
ID_selector_bytes:
0000: 01 01 00 06 01 04 00 01 6f 6e .....
...on
Stream_type: 13 (0x0d) [= ISO/IEC 13818-6 Sections (any type, including pri
vate data)]
reserved_1: 7 (0x07)
Elementary_PID: 115 (0x0073)
reserved_2: 15 (0x0f)
ES_info_length: 3 (0x0003)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 115 (0x73)
Stream_type: 11 (0x0b) [= ISO/IEC 13818-6 DSM-CC U-N Messages]
reserved_1: 7 (0x07)
Elementary_PID: 7401 (0x1ce9)
reserved_2: 15 (0x0f)
ES_info_length: 3 (0x0003)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 109 (0x6d)
Stream_type: 11 (0x0b) [= ISO/IEC 13818-6 DSM-CC U-N Messages]
reserved_1: 7 (0x07)
Elementary_PID: 7201 (0x1c21)
reserved_2: 15 (0x0f)
ES_info_length: 3 (0x0003)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 101 (0x65)
Stream_type: 11 (0x0b) [= ISO/IEC 13818-6 DSM-CC U-N Messages]
reserved_1: 7 (0x07)
Elementary_PID: 7202 (0x1c22)
reserved_2: 15 (0x0f)
ES_info_length: 3 (0x0003)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 102 (0x66)
Stream_type: 11 (0x0b) [= ISO/IEC 13818-6 DSM-CC U-N Messages]
reserved_1: 7 (0x07)
Elementary_PID: 7203 (0x1c23)
reserved_2: 15 (0x0f)
ES_info_length: 3 (0x0003)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 103 (0x67)
Stream_type: 11 (0x0b) [= ISO/IEC 13818-6 DSM-CC U-N Messages]
reserved_1: 7 (0x07)
Elementary_PID: 7204 (0x1c24)
reserved_2: 15 (0x0f)
ES_info_length: 3 (0x0003)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 104 (0x68)
Stream_type: 11 (0x0b) [= ISO/IEC 13818-6 DSM-CC U-N Messages]
reserved_1: 7 (0x07)
Elementary_PID: 7205 (0x1c25)
reserved_2: 15 (0x0f)
ES_info_length: 3 (0x0003)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 105 (0x69)
CRC: 3078021277 (0xb776e09d)
==========================================================
root@dm800se:~#
OpenEmbedded Linux dm800se
openpli 2.1 dm800se
dm800se login: root
root@dm800se:~# enigma2
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
16384k video mem
- double buffering available!
9184kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x6ee928 12288 bytes, stride 192
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox remote control (native)" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a remotecontrol
Input device "dreambox ir keyboard" is a keyboard
Input device "dreambox ir mouse" is a mouse
Found 5 input devices!
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 12490 services
scanning for frontends..
opening frontend 0
detected satellite frontend
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3
Use valid Linux Time <img src='http://openpli.org/forums/public/style_emoticons/<#EMO_DIR#>/smile.png' class='bbc_emoticon' alt=':)' /> (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
found 4 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
/proc/stb/frontend/0/lnb_sense is 8
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4505, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: positioner
Add sat 30
Add sat 48
Add sat 70
Add sat 90
Add sat 100
Add sat 130
Add sat 160
Add sat 170
Add sat 192
Add sat 216
Add sat 235
Add sat 255
Add sat 260
Add sat 282
Add sat 305
Add sat 310
Add sat 315
Add sat 330
Add sat 360
Add sat 390
Add sat 420
Add sat 450
Add sat 3300
Add sat 3325
Add sat 3355
Add sat 3380
Add sat 3400
Add sat 3420
Add sat 3450
Add sat 3475
Add sat 3490
Add sat 3520
Add sat 3530
Add sat 3550
Add sat 3560
Add sat 3592
sec config completed
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 1
411 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 404
88 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 492
123 entries in Bouquet userbouquet.dbe00.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 605
77 entries in Bouquet userbouquet.dbe0b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0a.tv 682
42 entries in Bouquet userbouquet.dbe0a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 724
208 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 924
100 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0c.tv 1014
43 entries in Bouquet userbouquet.dbe0c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0d.tv 1050
280 entries in Bouquet userbouquet.dbe0d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 1317
218 entries in Bouquet userbouquet.dbe08.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0e.tv 1521
144 entries in Bouquet userbouquet.dbe0e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1654
47 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 1696
48 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 1738
33 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 1770
2 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1770
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 1770
43 entries in Bouquet userbouquet.LastScanned.tv
17 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 1
12 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe03.radio 13
62 entries in Bouquet userbouquet.dbe03.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 75
0 entries in Bouquet userbouquet.favourites.radio
3 entries in Bouquet bouquets.radio
/usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
Unknown device type: dreambox front panel
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Polski
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
setLCDBrightness 127
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[IMDb] fallback to default translation for Query details from the Internet Movie Database
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for setup for Quickbutton
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
setMode - port: Scart mode: PAL rate: 50Hz
-> setting aspect, policy, policy2, wss any bestfit policy auto
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> applying pep values
[EPGImport] autostart (0) occured at 1354625870.0
starting hotplug handler
[TIMER] record time changed, start prepare is now: Tue Dec 4 00:36:40 2012
set rotor timeout to 360 seconds
[Timer] Record RecordTimerEntry(name=Alan Carr: Chatty Man, begin=Tue Dec 4 00:37:00 2012, serviceref=1:0:1:2F03:7F8:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Tue Dec 4 23:46:40 2012
[Timer] Record RecordTimerEntry(name=Celebrity Juice, begin=Tue Dec 4 23:47:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 00:36:40 2012
[Timer] Record RecordTimerEntry(name=Celebrity Juice: Girls on Top Special, begin=Wed Dec 5 00:37:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 03:41:40 2012
set rotor timeout to 35 seconds
[Timer] Record RecordTimerEntry(name=Prawdziwy seks: Dobrze byĹo?, begin=Wed Dec 5 03:42:00 2012, serviceref=1:0:1:C21:1E78:71:820000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 11:16:40 2012
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
[Timer] Record RecordTimerEntry(name=Ĺťelazna Dama, begin=Wed Dec 5 11:17:00 2012, serviceref=1:0:1:C21:1E78:71:820000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Thu Dec 6 20:56:40 2012
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
[Timer] Record RecordTimerEntry(name=The X Factor USA, begin=Thu Dec 6 20:57:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Thu Dec 6 22:56:40 2012
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
[Timer] Record RecordTimerEntry(name=Celebrity Juice, begin=Thu Dec 6 22:57:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sat Dec 8 04:21:40 2012
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
[Timer] Record RecordTimerEntry(name=Tyranozaur, begin=Sat Dec 8 04:22:00 2012, serviceref=1:0:1:3B67:12C:13E:820000:0:0:0:, justplay=0)
[EPGImport] autostart (0) occured at 1354625870.25
[EPGImport] WakeUpTime now set to 1354693500 (now=1354625870)
[ShowClock Ver. 0.5] DateToText converter not installed: No module named DateToText
[SKIN] Parsing embedded skin <embedded-in-'ShowClock'>
[Toplevel.importExternalModules] Could NOT import external module: AutoTimer
[Toplevel.importExternalModules] Exception Caught
No module named AutoTimer.AutoTimerResource
[Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
[Toplevel.importExternalModules] Exception Caught
No module named EPGRefresh.EPGRefreshResource
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface] started on 0.0.0.0:88 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[Webinterface] started on 127.0.0.1:80 auth=False ssl=False
[WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
[Quickbutton] fallback to default translation for Assign plugin to long green key pressed
[Quickbutton] fallback to default translation for Assign plugin to long yellow key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long blue key pressed
RemovePopup, id = ZapError
setValue 100
cannot open /proc/stb/audio/j1_mute(No such file or directory)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
playing 1:0:19:4440:1000:1:CFDACE7:0:0:0:
main thread is non-idle! display spinner!
[EPGC] 194838 events read from /hdd/epg.dat
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 1000:0001
opening frontend 0
(0)tune
Entry for 332,5? not in Rotor Table found... i try gotoXX?
siteLatitude = 49.682999, siteLongitude = 21.783001, 332.500000 degrees
PolarmountHourAngle=233.793418
RotorCmd = d35d
RotorCmd d35d, lastRotorCmd ffffffff
set rotor timeout to 360 seconds
prepare_sat System 1 Freq 11495000 Pol 1 SR 44100000 INV 2 FEC 9 orbpos 3325 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1745 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4440:1000:1:CFDACE7:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
[SEC] set static current limiting
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 100, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 100, 17], 'up': True, 'mac': '00:09:34:2b:b4:b5', 'dhcp': True, 'bcast': [192, 168, 100, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 100, 1]}}
[OpenWebif] started on 82
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 900ms
set sequence pos 9
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ed35d
[SEC] sleep 1000ms
set sequence pos 3
set sequence pos 3
[SEC] setFrontend 0
setting frontend 0
[SEC] set timeout 1440
[SEC] sleep 250ms
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 1 ok (886 889)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 2 ok (895 889)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 3 ok (892 889)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 4 ok (888 889)
ok > 4 .. goto 3
set sequence pos 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x19753e0 running
[eEPGCache] channel 0x19753e0 running
stop release channel timer
ok ... now we start!!
[EPGC] next update in 2 sec
[SEC] update current rotorparams 1434 d35d 3325
set sequence pos 4
[SEC] update current switch params
[SEC] sleep 500ms
PATready
use pmtpid 17d4 for service_id 4440
eventNewProgramInfo 0 0
dvb subtitle PID 17d9 with wrong subtitling type (14)... force 0x10!!
have 1 video stream(s) (17d5), and 2 audio stream(s) (17d6, 17da), and the pcr pid is 17d5, and the text pid is ffffffff
allocate demux
TuxTxt cache cleared
decoder state: play, vpid=6101, apid=6102
DMX_SET_PES_FILTER(0x17d5) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x17d6) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(9) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x17d5) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
dvb subtitle PID 17d9 with wrong subtitling type (14)... force 0x10!!
start dvb subtitles on pid 0x17d9 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:4440:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4440:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
sdt update done!
[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
[EPGC] start caching events(1354625892)
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail nownext reading
OpenEmbedded Linux dm800se
openpli 2.1 dm800se
dm800se login: root
root@dm800se:~# enigma2
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
16384k video mem
- double buffering available!
9184kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x6ee928 12288 bytes, stride 192
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox remote control (native)" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a remotecontrol
Input device "dreambox ir keyboard" is a keyboard
Input device "dreambox ir mouse" is a mouse
Found 5 input devices!
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 12490 services
scanning for frontends..
opening frontend 0
detected satellite frontend
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3
Use valid Linux Time <img src='http://openpli.org/forums/public/style_emoticons/<#EMO_DIR#>/smile.png' class='bbc_emoticon' alt=':)' /> (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
found 4 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
/proc/stb/frontend/0/lnb_sense is 8
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4505, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: positioner
Add sat 30
Add sat 48
Add sat 70
Add sat 90
Add sat 100
Add sat 130
Add sat 160
Add sat 170
Add sat 192
Add sat 216
Add sat 235
Add sat 255
Add sat 260
Add sat 282
Add sat 305
Add sat 310
Add sat 315
Add sat 330
Add sat 360
Add sat 390
Add sat 420
Add sat 450
Add sat 3300
Add sat 3325
Add sat 3355
Add sat 3380
Add sat 3400
Add sat 3420
Add sat 3450
Add sat 3475
Add sat 3490
Add sat 3520
Add sat 3530
Add sat 3550
Add sat 3560
Add sat 3592
sec config completed
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 1
411 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 404
88 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 492
123 entries in Bouquet userbouquet.dbe00.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 605
77 entries in Bouquet userbouquet.dbe0b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0a.tv 682
42 entries in Bouquet userbouquet.dbe0a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 724
208 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 924
100 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0c.tv 1014
43 entries in Bouquet userbouquet.dbe0c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0d.tv 1050
280 entries in Bouquet userbouquet.dbe0d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 1317
218 entries in Bouquet userbouquet.dbe08.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0e.tv 1521
144 entries in Bouquet userbouquet.dbe0e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1654
47 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 1696
48 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 1738
33 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 1770
2 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1770
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 1770
43 entries in Bouquet userbouquet.LastScanned.tv
17 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 1
12 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe03.radio 13
62 entries in Bouquet userbouquet.dbe03.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 75
0 entries in Bouquet userbouquet.favourites.radio
3 entries in Bouquet bouquets.radio
/usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
Unknown device type: dreambox front panel
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Polski
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
setLCDBrightness 127
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[IMDb] fallback to default translation for Query details from the Internet Movie Database
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for setup for Quickbutton
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
setMode - port: Scart mode: PAL rate: 50Hz
-> setting aspect, policy, policy2, wss any bestfit policy auto
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> applying pep values
[EPGImport] autostart (0) occured at 1354625870.0
starting hotplug handler
[TIMER] record time changed, start prepare is now: Tue Dec 4 00:36:40 2012
set rotor timeout to 360 seconds
[Timer] Record RecordTimerEntry(name=Alan Carr: Chatty Man, begin=Tue Dec 4 00:37:00 2012, serviceref=1:0:1:2F03:7F8:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Tue Dec 4 23:46:40 2012
[Timer] Record RecordTimerEntry(name=Celebrity Juice, begin=Tue Dec 4 23:47:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 00:36:40 2012
[Timer] Record RecordTimerEntry(name=Celebrity Juice: Girls on Top Special, begin=Wed Dec 5 00:37:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 03:41:40 2012
set rotor timeout to 35 seconds
[Timer] Record RecordTimerEntry(name=Prawdziwy seks: Dobrze byĹo?, begin=Wed Dec 5 03:42:00 2012, serviceref=1:0:1:C21:1E78:71:820000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 11:16:40 2012
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
[Timer] Record RecordTimerEntry(name=Ĺťelazna Dama, begin=Wed Dec 5 11:17:00 2012, serviceref=1:0:1:C21:1E78:71:820000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Thu Dec 6 20:56:40 2012
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
[Timer] Record RecordTimerEntry(name=The X Factor USA, begin=Thu Dec 6 20:57:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Thu Dec 6 22:56:40 2012
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
[Timer] Record RecordTimerEntry(name=Celebrity Juice, begin=Thu Dec 6 22:57:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sat Dec 8 04:21:40 2012
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
set rotor timeout to 35 seconds
[Timer] Record RecordTimerEntry(name=Tyranozaur, begin=Sat Dec 8 04:22:00 2012, serviceref=1:0:1:3B67:12C:13E:820000:0:0:0:, justplay=0)
[EPGImport] autostart (0) occured at 1354625870.25
[EPGImport] WakeUpTime now set to 1354693500 (now=1354625870)
[ShowClock Ver. 0.5] DateToText converter not installed: No module named DateToText
[SKIN] Parsing embedded skin <embedded-in-'ShowClock'>
[Toplevel.importExternalModules] Could NOT import external module: AutoTimer
[Toplevel.importExternalModules] Exception Caught
No module named AutoTimer.AutoTimerResource
[Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
[Toplevel.importExternalModules] Exception Caught
No module named EPGRefresh.EPGRefreshResource
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface] started on 0.0.0.0:88 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[Webinterface] started on 127.0.0.1:80 auth=False ssl=False
[WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
[Quickbutton] fallback to default translation for Assign plugin to long green key pressed
[Quickbutton] fallback to default translation for Assign plugin to long yellow key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long blue key pressed
RemovePopup, id = ZapError
setValue 100
cannot open /proc/stb/audio/j1_mute(No such file or directory)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
playing 1:0:19:4440:1000:1:CFDACE7:0:0:0:
main thread is non-idle! display spinner!
[EPGC] 194838 events read from /hdd/epg.dat
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 1000:0001
opening frontend 0
(0)tune
Entry for 332,5? not in Rotor Table found... i try gotoXX?
siteLatitude = 49.682999, siteLongitude = 21.783001, 332.500000 degrees
PolarmountHourAngle=233.793418
RotorCmd = d35d
RotorCmd d35d, lastRotorCmd ffffffff
set rotor timeout to 360 seconds
prepare_sat System 1 Freq 11495000 Pol 1 SR 44100000 INV 2 FEC 9 orbpos 3325 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1745 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4440:1000:1:CFDACE7:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
[SEC] set static current limiting
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 100, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 100, 17], 'up': True, 'mac': '00:09:34:2b:b4:b5', 'dhcp': True, 'bcast': [192, 168, 100, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 100, 1]}}
[OpenWebif] started on 82
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 900ms
set sequence pos 9
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ed35d
[SEC] sleep 1000ms
set sequence pos 3
set sequence pos 3
[SEC] setFrontend 0
setting frontend 0
[SEC] set timeout 1440
[SEC] sleep 250ms
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 1 ok (886 889)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 2 ok (895 889)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 3 ok (892 889)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 4 ok (888 889)
ok > 4 .. goto 3
set sequence pos 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x19753e0 running
[eEPGCache] channel 0x19753e0 running
stop release channel timer
ok ... now we start!!
[EPGC] next update in 2 sec
[SEC] update current rotorparams 1434 d35d 3325
set sequence pos 4
[SEC] update current switch params
[SEC] sleep 500ms
PATready
use pmtpid 17d4 for service_id 4440
eventNewProgramInfo 0 0
dvb subtitle PID 17d9 with wrong subtitling type (14)... force 0x10!!
have 1 video stream(s) (17d5), and 2 audio stream(s) (17d6, 17da), and the pcr pid is 17d5, and the text pid is ffffffff
allocate demux
TuxTxt cache cleared
decoder state: play, vpid=6101, apid=6102
DMX_SET_PES_FILTER(0x17d5) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x17d6) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(9) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x17d5) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
dvb subtitle PID 17d9 with wrong subtitling type (14)... force 0x10!!
start dvb subtitles on pid 0x17d9 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:4440:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4440:1000:1:CFDACE7:0:0:0:
[eDVBCIInterfaces] gotPMT
sdt update done!
[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
[EPGC] start caching events(1354625892)
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail nownext readingset wakeup time to 2012/12/04 23:42
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:4440:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:19:4440:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
cleaning up
TuxTxt cache cleared
start release channel timer
[EPGImport] autostart (1) occured at 1354625971.62
[EPGImport] Stop
---- saving lame channel db
saved 1051 channels and 12490 services!
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x19753e0
[eEPGCache] remove channel 0x19753e0
stop release channel timer
[EPGC] store epg to realpath '/media/hdd/epg.dat'
[EPGC] 160521 events written to /hdd/epg.dat
thread joined 0
^Xmain thread is non-idle! display spinner!
[1]+ Stopped enigma2
root@dm800se:~# clear
root@dm800se:~# enigma2
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
16384k video mem
- double buffering available!
9184kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x6ee928 12288 bytes, stride 192
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
EVIOCGRAB: Device or resource busy
Input device "dreambox front panel" is a remotecontrol
EVIOCGRAB: Device or resource busy
Input device "dreambox remote control (native)" is a remotecontrol
EVIOCGRAB: Device or resource busy
Input device "dreambox advanced remote control (native)" is a remotecontrol
Input device "dreambox ir keyboard" is a keyboard
Input device "dreambox ir mouse" is a mouse
Found 5 input devices!
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 12490 services
scanning for frontends..
opening frontend 0
failed! (/dev/dvb/adapter0/frontend0) Device or resource busy
found 1 adapter, 0 frontends(0 sim) and 5 demux, boxtype 3
Use valid Linux Time <img src='http://openpli.org/forums/public/style_emoticons/<#EMO_DIR#>/smile.png' class='bbc_emoticon' alt=':)' /> (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
found 4 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
Reading satellites.xml
sec config cleared
slot: 0 configmode: simple
diseqcmode: positioner
Add sat 30
Add sat 48
Add sat 70
Add sat 90
Add sat 100
Add sat 130
Add sat 160
Add sat 170
Add sat 192
Add sat 216
Add sat 235
Add sat 255
Add sat 260
Add sat 282
Add sat 305
Add sat 310
Add sat 315
Add sat 330
Add sat 360
Add sat 390
Add sat 420
Add sat 450
Add sat 3300
Add sat 3325
Add sat 3355
Add sat 3380
Add sat 3400
Add sat 3420
Add sat 3450
Add sat 3475
Add sat 3490
Add sat 3520
Add sat 3530
Add sat 3550
Add sat 3560
Add sat 3592
sec config completed
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 1
411 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 404
88 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 492
123 entries in Bouquet userbouquet.dbe00.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 605
77 entries in Bouquet userbouquet.dbe0b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0a.tv 682
42 entries in Bouquet userbouquet.dbe0a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 724
208 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 924
100 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0c.tv 1014
43 entries in Bouquet userbouquet.dbe0c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0d.tv 1050
280 entries in Bouquet userbouquet.dbe0d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 1317
218 entries in Bouquet userbouquet.dbe08.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0e.tv 1521
144 entries in Bouquet userbouquet.dbe0e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1654
47 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 1696
48 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 1738
33 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 1770
2 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1770
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 1770
43 entries in Bouquet userbouquet.LastScanned.tv
17 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 1
12 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe03.radio 13
62 entries in Bouquet userbouquet.dbe03.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 75
0 entries in Bouquet userbouquet.favourites.radio
3 entries in Bouquet bouquets.radio
/usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
Unknown device type: dreambox front panel
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Polski
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
setLCDBrightness 127
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[IMDb] fallback to default translation for Query details from the Internet Movie Database
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for setup for Quickbutton
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
setMode - port: Scart mode: PAL rate: 50Hz
-> setting aspect, policy, policy2, wss any bestfit policy auto
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> applying pep values
[EPGImport] autostart (0) occured at 1354626073.37
starting hotplug handler
[TIMER] record time changed, start prepare is now: Tue Dec 4 23:46:40 2012
Possible Bug: unknown Conflict!
[Timer] Record RecordTimerEntry(name=Celebrity Juice, begin=Tue Dec 4 23:47:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 00:36:40 2012
ignore timer conflict
[Timer] Record RecordTimerEntry(name=Celebrity Juice: Girls on Top Special, begin=Wed Dec 5 00:37:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 03:41:40 2012
ignore timer conflict
[Timer] Record RecordTimerEntry(name=Prawdziwy seks: Dobrze byĹo?, begin=Wed Dec 5 03:42:00 2012, serviceref=1:0:1:C21:1E78:71:820000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Dec 5 11:16:40 2012
ignore timer conflict
[Timer] Record RecordTimerEntry(name=Ĺťelazna Dama, begin=Wed Dec 5 11:17:00 2012, serviceref=1:0:1:C21:1E78:71:820000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Thu Dec 6 20:56:40 2012
ignore timer conflict
[Timer] Record RecordTimerEntry(name=The X Factor USA, begin=Thu Dec 6 20:57:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Thu Dec 6 22:56:40 2012
ignore timer conflict
[Timer] Record RecordTimerEntry(name=Celebrity Juice, begin=Thu Dec 6 22:57:00 2012, serviceref=1:0:19:F5C:7D3:2:11A0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sat Dec 8 04:21:40 2012
ignore timer conflict
[Timer] Record RecordTimerEntry(name=Tyranozaur, begin=Sat Dec 8 04:22:00 2012, serviceref=1:0:1:3B67:12C:13E:820000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Tue Dec 4 00:36:40 2012
Possible Bug: unknown Conflict!
[Timer] Record RecordTimerEntry(name=Alan Carr: Chatty Man, begin=Tue Dec 4 00:37:00 2012, serviceref=1:0:1:2F03:7F8:2:11A0000:0:0:0:, justplay=0)
[EPGImport] autostart (0) occured at 1354626073.56
[EPGImport] WakeUpTime now set to 1354693500 (now=1354626073)
[ShowClock Ver. 0.5] DateToText converter not installed: No module named DateToText
[SKIN] Parsing embedded skin <embedded-in-'ShowClock'>
[Toplevel.importExternalModules] Could NOT import external module: AutoTimer
[Toplevel.importExternalModules] Exception Caught
No module named AutoTimer.AutoTimerResource
[Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
[Toplevel.importExternalModules] Exception Caught
No module named EPGRefresh.EPGRefreshResource
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface] started on 0.0.0.0:88 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[Webinterface] started on 127.0.0.1:80 auth=False ssl=False
[WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
[Quickbutton] fallback to default translation for Assign plugin to long green key pressed
[Quickbutton] fallback to default translation for Assign plugin to long yellow key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long blue key pressed
RemovePopup, id = ZapError
setValue 100
cannot open /proc/stb/audio/j1_mute(No such file or directory)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
playing 1:0:19:4440:1000:1:CFDACE7:0:0:0:
main thread is non-idle! display spinner!
[EPGC] 160521 events read from /hdd/epg.dat
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 1000:0001
allocate Channel: res -7
DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 100, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 100, 17], 'up': True, 'mac': '00:09:34:2b:b4:b5', 'dhcp': True, 'bcast': [192, 168, 100, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 100, 1]}}
[OpenWebif] started on 82
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
Timeout!
[ePopen] command: ('hdparm', 'hdparm', '-y', '/dev/sda')
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
action -> InfobarChannelSelection openServiceList
action -> OkCancelActions cancel
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
action -> InfobarChannelSelection zapDown
playing 1:0:1:1100:1000:1:CFDACE7:0:0:0:
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 1000:0001
allocate Channel: res -7
DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError
Timeout!
action -> InfobarChannelSelection openServiceList
action -> ChannelSelectBaseActions showFavourites
action -> OkCancelActions ok
action -> ChannelSelectBaseActions showFavourites
action -> ChannelSelectBaseActions showSatellites
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
action -> OkCancelActions ok
playing 1:0:19:4440:1000:1:CFDACE7:0:0:0:
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 1000:0001
allocate Channel: res -7
DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError
Timeout!
action -> InfobarChannelSelection zapDown
playing 1:0:1:1100:1000:1:CFDACE7:0:0:0:
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 1000:0001
allocate Channel: res -7
DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError
Timeout!
[2]+ Stopped enigma2
[1]- Killed enigma2
root@dm800se:~#
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #29
-
- Senior Member
- 2,621 posts
+30
Good
Posted 6 March 2013 - 13:30
It looks like PMT at 27,5W is scrambled again after a few months' break.first, set the correct vpid/apid in the lamedb
log in to your box (telnet/ssh/putty)
init 4
enigma2
now tune the channel
ctrl+c
and post the log here.
BTW, since my initial reply you mentioned that a BISS encoding is used.
That means more workarounds are needed, in order to let the softcam do its job (it needs the PMT as well, to find the ecm pid).
Shall I provide you with a log as per your instructions above?
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #30
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 6 March 2013 - 14:43
If there is a BISS decoding, that won't help.
But if you are sure it's just a scrambled pmt, nothing else, but e2 does not handle the cached vpid/apid because of the invalid pmt data, yes a log might shed some light.
But if you are sure it's just a scrambled pmt, nothing else, but e2 does not handle the cached vpid/apid because of the invalid pmt data, yes a log might shed some light.
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #31
-
- Senior Member
- 2,621 posts
+30
Good
Posted 6 March 2013 - 15:41
Yes, there is a BISS encoding, unfortunately.
PMT is scrambled and some non-Linux receivers can handle the scrambled PMT quite well.
So the ECM pid would be a problem in this case? There is no easy fix for that? No chance to "inject" the missing information, including ECM pid, into Enigma2?
PMT is scrambled and some non-Linux receivers can handle the scrambled PMT quite well.
So the ECM pid would be a problem in this case? There is no easy fix for that? No chance to "inject" the missing information, including ECM pid, into Enigma2?
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #32
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 6 March 2013 - 16:19
e2 does not need the ecm pid, the softcam does
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #33
-
- Senior Member
- 2,621 posts
+30
Good
Posted 6 March 2013 - 23:07
pieterg, does this say something to you?
action -> InfobarChannelSelection zapDown playing 1:0:1:1044:1000:1:CFDACE7:0:0:0: [eDVBCAService] free slot 0 demux 0 for service 1:0:1:1100:1000:1:CFDACE7:0:0:0: [eDVBCAService] free service 1:0:1:1100:1000:1:CFDACE7:0:0:0: decoder state: play, vpid=-1, apid=-1 DEMUX_STOP - pcr - ok DEMUX_STOP - video - ok VIDEO_STOP - ok AUDIO_STOP - ok DEMUX_STOP - audio - ok AUDIO_CONTINUE - ok cleaning up TuxTxt cache cleared start release channel timer not pauseable. RemovePopup, id = ZapError use cached_channel stop release channel timer allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:1:1044:1000:1:CFDACE7:0:0:0: ok ... now we start!! eventNewProgramInfo 0 0 have 1 video stream(s) (0065), and 1 audio stream(s) (0066), and the pcr pid is 0065, and the text pid is ffffffff TuxTxt cache cleared decoder state: play, vpid=101, apid=102 DMX_SET_PES_FILTER(0x65) - pcr - ok DEMUX_START - pcr - ok DMX_SET_PES_FILTER(0x66) - audio - ok DEMUX_START - audio - ok AUDIO_SET_BYPASS(1) - ok AUDIO_PAUSE - ok AUDIO_PLAY - ok Video Device: /dev/dvb/adapter0/video0 demux device: /dev/dvb/adapter0/demux0 VIDEO_SET_STREAMTYPE 0 - ok DMX_SET_PES_FILTER(0x65) - video - ok DEMUX_START - video - ok VIDEO_FREEZE - ok VIDEO_PLAY - ok VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok VIDEO_CONTINUE - ok AUDIO_CONTINUE - ok disable teletext subtitles not pauseable. start dvb subtitles on pid 0x0069 with composition_page_id 1 and ancillary_page_id 1 [eDVBCAService] new service 1:0:1:1044:1000:1:CFDACE7:0:0:0: [eDVBCAService] add demux 0 to slot 0 service 1:0:1:1044:1000:1:CFDACE7:0:0:0: poll: unhandled POLLERR/HUP/NVAL for fd 50(16) PATready use pmtpid 0064 for service_id 1044 DVB service failed to tune - error 4 RemovePopup, id = ZapError AddPopup, id = ZapError Timeout!
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #34
-
- Senior Member
- 2,621 posts
+30
Good
Posted 6 March 2013 - 23:16
I just want to add that the log comes from the following channel:
BBC One England
CAID 2600
SID 1044
VPID 0065
APID 0066
PMT 0064
PCR PID 0065
ECM PID 1FFF
Transport ID 1000
Network ID 0001
ProvID 000000
BBC One England
CAID 2600
SID 1044
VPID 0065
APID 0066
PMT 0064
PCR PID 0065
ECM PID 1FFF
Transport ID 1000
Network ID 0001
ProvID 000000
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #35
-
- Senior Member
- 2,621 posts
+30
Good
Posted 6 March 2013 - 23:33
Here is one more log, this time it comes from an HD channel:
Channel details:
BBC One HD (27.5°W)
TP: 11495 H 44100 9/10 DVB-S2 QPSK
- CAID 2600
- SID 4484
- VPID 19C9
- APID 19CA
- PMT 19C8
- PCR PID 19C9
- ECM PID 1FFF
- Transport ID 1000
- Network ID 0001
- ProvID 000000
If you need some more specific tests or logs, I will be glad to provide them.
OpenEmbedded Linux dm800se
openpli 2.1 dm800se
dm800se login: root
root@dm800se:~# init 4
root@dm800se:~# enigma2
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
16384k video mem
- double buffering available!
9184kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x6ee928 12288 bytes, stride 192
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox remote control (native)" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a remotecontrol
Input device "dreambox ir keyboard" is a keyboard
Input device "dreambox ir mouse" is a mouse
Found 5 input devices!
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 12744 services
scanning for frontends..
opening frontend 0
detected satellite frontend
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3
Use valid Linux Time <img src='http://openpli.org/forums/public/style_emoticons/<#EMO_DIR#>/smile.png' class='bbc_emoticon' alt=':)' /> (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
found 4 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
/proc/stb/frontend/0/lnb_sense is 8
[Harddisk] enumerating block devices...
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4505, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: positioner
Add sat 30
Add sat 48
Add sat 70
Add sat 90
Add sat 100
Add sat 130
Add sat 160
Add sat 170
Add sat 192
Add sat 216
Add sat 235
Add sat 255
Add sat 260
Add sat 282
Add sat 305
Add sat 310
Add sat 315
Add sat 330
Add sat 360
Add sat 390
Add sat 420
Add sat 450
Add sat 3300
Add sat 3325
Add sat 3355
Add sat 3380
Add sat 3400
Add sat 3420
Add sat 3450
Add sat 3475
Add sat 3490
Add sat 3520
Add sat 3530
Add sat 3550
Add sat 3560
Add sat 3592
sec config completed
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 1
413 entries in Bouquet userbouquet.dbe07.tv
loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 406
87 entries in Bouquet userbouquet.dbe02.tv
loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 493
126 entries in Bouquet userbouquet.dbe00.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 609
81 entries in Bouquet userbouquet.dbe0b.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0a.tv 690
42 entries in Bouquet userbouquet.dbe0a.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0f.tv 732
19 entries in Bouquet userbouquet.dbe0f.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 751
208 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 951
100 entries in Bouquet userbouquet.dbe03.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0c.tv 1041
43 entries in Bouquet userbouquet.dbe0c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0d.tv 1077
280 entries in Bouquet userbouquet.dbe0d.tv
loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 1344
218 entries in Bouquet userbouquet.dbe08.tv
loading bouquet... /etc/enigma2/userbouquet.dbe0e.tv 1548
144 entries in Bouquet userbouquet.dbe0e.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1681
47 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 1723
48 entries in Bouquet userbouquet.dbe04.tv
loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 1765
35 entries in Bouquet userbouquet.dbe05.tv
loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 1799
4 entries in Bouquet userbouquet.dbe01.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1801
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 1801
13 entries in Bouquet userbouquet.LastScanned.tv
18 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 1
12 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe03.radio 13
62 entries in Bouquet userbouquet.dbe03.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 75
0 entries in Bouquet userbouquet.favourites.radio
3 entries in Bouquet bouquets.radio
/usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
Unknown device type: dreambox front panel
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Polski
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
setLCDBrightness 127
[IMDb] fallback to default translation for Query details from the Internet Movie Database
[IMDb] fallback to default translation for Query details from the Internet Movie Database
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for Nothing
[Quickbutton] fallback to default translation for setup for Quickbutton
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
setMode - port: DVI mode: 1080i rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> applying pep values
[EPGImport] autostart (0) occured at 1362608202.57
starting hotplug handler
[EPGImport] autostart (0) occured at 1362608202.62
[EPGImport] WakeUpTime now set to 1362642300 (now=1362608202)
[ShowClock Ver. 0.5] DateToText converter not installed: No module named DateToText
[SKIN] Parsing embedded skin <embedded-in-'ShowClock'>
[Toplevel.importExternalModules] Could NOT import external module: AutoTimer
[Toplevel.importExternalModules] Exception Caught
No module named AutoTimer.AutoTimerResource
[Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
[Toplevel.importExternalModules] Exception Caught
No module named EPGRefresh.EPGRefreshResource
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface] started on 0.0.0.0:88 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[Webinterface] started on 127.0.0.1:80 auth=False ssl=False
[WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
[Quickbutton] fallback to default translation for Assign plugin to long green key pressed
[Quickbutton] fallback to default translation for Assign plugin to long yellow key pressed
[Quickbutton] fallback to default translation for Assign plugin to long red key pressed
[Quickbutton] fallback to default translation for Assign plugin to long blue key pressed
RemovePopup, id = ZapError
setValue 75
cannot open /proc/stb/audio/j1_mute(No such file or directory)
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 75 75 (raw)
Setvolume: 16 16 (-1db)
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
playing 1:0:1:1044:1000:1:CFDACE7:0:0:0:
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 1000:0001
opening frontend 0
(0)tune
Entry for 332,5? not in Rotor Table found... i try gotoXX?
siteLatitude = 49.682999, siteLongitude = 21.783001, 332.500000 degrees
PolarmountHourAngle=233.793418
RotorCmd = d35d
RotorCmd d35d, lastRotorCmd ffffffff
set rotor timeout to 360 seconds
prepare_sat System 1 Freq 11495000 Pol 1 SR 44100000 INV 2 FEC 9 orbpos 3325 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1745 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1044:1000:1:CFDACE7:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
[SEC] set static current limiting
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 900ms
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 100, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 100, 17], 'up': True, 'mac': '00:09:34:2b:b4:b5', 'dhcp': True, 'bcast': [192, 168, 100, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 100, 1]}}
[OpenWebif] started on 82
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
set sequence pos 9
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ed35d
[SEC] sleep 1000ms
set sequence pos 3
set sequence pos 3
[SEC] setFrontend 0
setting frontend 0
[SEC] set timeout 1440
[SEC] sleep 250ms
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 1 ok (887 890)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 2 ok (887 890)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 3 ok (889 890)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 4 ok (892 890)
ok > 4 .. goto 3
set sequence pos 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2d1b15f0 running
[eEPGCache] channel 0x2d1b15f0 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0065), and 1 audio stream(s) (0066), and the pcr pid is 0065, and the text pid is ffffffff
allocate demux
[EPGC] next update in 2 sec
TuxTxt cache cleared
decoder state: play, vpid=101, apid=102
DMX_SET_PES_FILTER(0x65) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x66) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x65) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x0069 with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
[SEC] update current rotorparams 1435 d35d 3325
set sequence pos 4
[SEC] update current switch params
[SEC] sleep 500ms
PATready
use pmtpid 0064 for service_id 1044
[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
sdt update done!
[EPGC] start caching events(1362608210)
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
DVB service failed to tune - error 4
RemovePopup, id = ZapError
AddPopup, id = ZapError
Timeout!
action -> InfobarChannelSelection openServiceList
action -> OkCancelActions ok
playing 1:0:19:4484:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
[eDVBCAService] free service 1:0:1:1044:1000:1:CFDACE7:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
cleaning up
TuxTxt cache cleared
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4484:1000:1:CFDACE7:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (19c9), and 0 audio stream(s), and the pcr pid is 19c9, and the text pid is ffffffff
TuxTxt cache cleared
decoder state: play, vpid=6601, apid=-1
DMX_SET_PES_FILTER(0x19c9) - pcr - ok
DEMUX_START - pcr - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x19c9) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
disable teletext subtitles
not pauseable.
start dvb subtitles on pid 0x19cd with composition_page_id 1 and ancillary_page_id 1
[eDVBCAService] new service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4484:1000:1:CFDACE7:0:0:0:
poll: unhandled POLLERR/HUP/NVAL for fd 50(16)
PATready
use pmtpid 19c8 for service_id 4484
DVB service failed to tune - error 4
RemovePopup, id = ZapError
AddPopup, id = ZapError
Timeout!Channel details:
BBC One HD (27.5°W)
TP: 11495 H 44100 9/10 DVB-S2 QPSK
- CAID 2600
- SID 4484
- VPID 19C9
- APID 19CA
- PMT 19C8
- PCR PID 19C9
- ECM PID 1FFF
- Transport ID 1000
- Network ID 0001
- ProvID 000000
If you need some more specific tests or logs, I will be glad to provide them.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #36
-
- Senior Member
- 2,621 posts
+30
Good
Posted 6 March 2013 - 23:42
Here is a screenshot of SERVICE INFORMATION:
Attached Files
-
screenshot.jpg 50.05KB
161 downloads
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #37
-
- Senior Member
- 2,621 posts
+30
Good
Posted 8 March 2013 - 11:42
I assume lack of response means that no attempts to fix this will be made. 
It is a pity that such a powerful tool as Enigma2 has a problem with manual insertion of all PID details required to view channels.
It is a pity that such a powerful tool as Enigma2 has a problem with manual insertion of all PID details required to view channels.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #38
-
- Senior Member
- 2,621 posts
+30
Good
Posted 21 August 2013 - 09:15
I understand there is no way to find a solution to the problem of "crypted PMT" on Enigma2? 
Attached Files
-
capture_001_20082013_232256.png 320.88KB
67 downloads
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #39
-
- Senior Member
- 45 posts
+1
Neutral
Posted 25 August 2013 - 19:27
Hi Robinson
I have been watching this thread for some months and it is disappointing that nothing new has happened, despite your efforts. It seems clear that this is not an insoluable problem even if the solution requires a rather inelegant (27.5W specific) patch (e.g. a fix that ignored the scrambeld PID and hardwires the CAID to the channel and uses a user supplied PMT if it sees them in the LAMDB data). Logic tells us that the TM boxes must do something on these lines as they keep working when the PID scrambles.
Does anyone know where in the code stack this processing is done? If it is in the Python code I could have a look myself but do not know where to look.
All the best
Rob
Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #40
-
- Senior Member
- 2,621 posts
+30
Good
Posted 25 August 2013 - 19:35
Thanks Rob.
My efforts are probably nothing compared to the effort one has to make to try and find a solution to "inject" the correct PMT PID into Enigma2.
Besides, I think OpenPLi developers are not too interested in receiving 27.5W because in the Netherlands they have easy access to those channels at 28.2E. However, the more to the east the more diffcicult, verging on the impossible, it is to get these channels. So I guess it is not even on the "to do" list.
If a developer has some ideas, though, maybe they could share it with forum users. Maybe someone else could do the job if some hints were provided.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
5 user(s) are reading this topic
0 members, 5 guests, 0 anonymous users
