1943 replies to this topic

[gorski]

Have you "escalated the problem" to ET/BSMedia?

[pryggi]

pryggi

The problem with recording in standby / timer recording is that there is no way how to get from E2 (via web interface) information about fact that particular service is being recorded. There is currently only information about service being watched. Script gets SID/PIDs this way and sends them to CAM.

Any hint is welcome.

Seems that if recording is in progress then this could be found out through the timer state in http://localhost/web/timerlist
<e2state>2</e2state> - Recording
Other states:
<e2state>0</e2state> - Waiting
<e2state>3</e2state> - Finished

Hope this helps, but there might be additional obstacles to overcome.

[Marjanen]

Hi.
Quick question before i'm gonna try this for the first time;
Is it possible to make it work with vu ultimo pli 4.0 ?

[Marjanen]

I did all what i reat from the posts but when i run the script /usr/bin/bbc_pmt_v4.py -t short -d /dev/dvb/adapter0/demux0

I only get this message in telnet:
wget: can't connect to remote host (127.0.0.1) : Connection refused

What i'm doing wrong?

[Marjanen]

Ok i think i got the script running after i but authorization off and changed the webinterface port back to 80.
But still black screen.
What could be the problem?
Keys are ok ( was ok yesterday when i got all sd working with BH image...)

I managet to edit lamedb with notepad2, init 4, edit and then init 3
But there is many "version" on how the lamedb should look like... I followed Meier2k:
4440:0cfdace7:1000:0001:25:0
BBC Two HD
p:BBC,c:0017d5,c:0317d5,c:050001,c:1217d6,f:5

I'm running mgcamd.
Is oscamymod better? If so, please sent me correct oscam files please. And advice the installation please.

I've also put the 3 files v4 and gave all there files attributes 755.

Well no i'm lost. If someone could help out here please.

And the box is still vu ultimo and image newest openpli 4.0

[Marjanen]

Thanks

andres66

I got it all sorted!

[Marjanen]

How did i get subtitles on?

[pecorazza]

How did i get subtitles on?

 

Look at my post some pages before up and modify lamedb file with c:09 values for each channel

Then use doublets bbc_pmt_v5 script

Edited by pecorazza, 28 March 2014 - 14:56.

[claasi]

Since Friday the reception of 2E/2F on 28,2 East has dropped outside the UK spotbeam to new lows. I would like to take the opportunity to thank folks here for the good job to make this possible.

 

Especially Robinson for his insistance in the beginning to get this rolling and Doublet for the Scripting. But of cause to all others fr the assistance. Keep the good work up. For the time being it just works great.

[MrA]

Been reading and following the whole post for the last week and still have problems but that may be because of the image I have. I'm located in the Azores, have lost 28.2E so am looking to 27.5W now.

 

I use a Gigablue Quad running latest VIX Zeus with oscam-ymod 18.51 so some of the folders differ from PLi.

 

So far I have all channels at 27.5W scanned in and all ID's except PMT. I believe I have the latest keys,

 

However, still no sound or picture and can't zap to with openwebif.

 

Any suggestions would be much appreciated.

 

I also would like to reiterate the above posts and say thanks to so many of you for your perseverance and the help you give to others.

[finnsat]

 Thanks to all in this forum for an outstanding job! After a week of reading and re-reading I cleared all obstacles and got the script running in short mode on DM800se SR4, Open PLi 4.0, os**m_ymod which is doing a dual job for both 27.5W local and 28.2E remote here in Finland. Great work by all here !!!

Edited by finnsat, 31 March 2014 - 12:41.

[pecorazza]

It seems that there is another problem, at least with BBC Four.

I tried to record three or four times just to check if everything is ok (apart from subtitles of course).

 

I noticed that the recording often freezes for a fraction of a second, then pixelates and finally continues to play. This happens once or twice every two minutes and it's really annoying.

Did someone else noticed this problem? Any suggestions for a workaround?

Thanks

[doublet]

Been reading and following the whole post for the last week and still have problems but that may be because of the image I have. I'm located in the Azores, have lost 28.2E so am looking to 27.5W now.

 

I use a Gigablue Quad running latest VIX Zeus with oscam-ymod 18.51 so some of the folders differ from PLi.

 

So far I have all channels at 27.5W scanned in and all ID's except PMT. I believe I have the latest keys,

 

However, still no sound or picture and can't zap to with openwebif.

 

Any suggestions would be much appreciated.

 

I also would like to reiterate the above posts and say thanks to so many of you for your perseverance and the help you give to others.

 

Azores... nice place. I would like to go there for holidays :-)

 

Try to run the script manually (in long mode, with different demux numbers) and post the output. You should see CAPMT dump there.

Edited by doublet, 2 April 2014 - 21:53.

[doublet]

It seems that there is another problem, at least with BBC Four.

I tried to record three or four times just to check if everything is ok (apart from subtitles of course).

 

I noticed that the recording often freezes for a fraction of a second, then pixelates and finally continues to play. This happens once or twice every two minutes and it's really annoying.

Did someone else noticed this problem? Any suggestions for a workaround?

Thanks

Have recorded about 3 minutes of BBC Four, but didn't observe any problem in the recorded file.

[pecorazza]

It seems that there is another problem, at least with BBC Four.

I tried to record three or four times just to check if everything is ok (apart from subtitles of course).

 

I noticed that the recording often freezes for a fraction of a second, then pixelates and finally continues to play. This happens once or twice every two minutes and it's really annoying.

Did someone else noticed this problem? Any suggestions for a workaround?

Thanks

Have recorded about 3 minutes of BBC Four, but didn't observe any problem in the recorded file.

 

Thanks for the reply. Maybe it depends on hardware as well.

i am using a Gigablue 800Se with OpenRSI on it

[BBC-Hörer]

can someone who owns an ET9000 confirm that BBC3 / BBC4 runs or not as the ET9000 makes trouble with big symbolrate.

All other tv services are ok.

 

Thanks in advance

Andreas

[Robinson]

Maybe something has changed indeed but both services run well on CBBC and CBeebies SID's.

[jpuigs]

can someone who owns an ET9000 confirm that BBC3 / BBC4 runs or not as the ET9000 makes trouble with big symbolrate.

All other tv services are ok.

 

Thanks in advance

Andreas

 

 

BBC Three and BBC Four don't run on my ET9000, but as Robinson says both services run on CBBC and CBeebies chs.

Edited by jordi.puig, 4 April 2014 - 23:42.

[BBC-Hörer]

thank you guys, that is very interesting! Yesterday it was confirmed that BBC3 / BBC4 appear on DR. HD D15.

Just now I checked and the BBC children channels were ok!

May be it is the way the several receivers deal with the IDs?

 

Please have a look to this problem too. I do not hope that this will be the next challenge.

 

Andreas

[pecorazza]

@doublet

I am thinking to buy a dreambox, for recording (with subtitles) purposes.

Can you please let me now which the model you own?

 

Thank you very much