1943 replies to this topic

[doublet]

I've got 7020HD.

[pecorazza]

Thank you

[drhans]

Hello, could someone please confirm whether all this works using a different image than PLI on DM500HD? I got these great scripts working with PLi Image with mgcamd in "long" mode. But now I'm struggling when using another image.

 

I can see the channel as decrypted in mgcamd but all I get is just black screen. I've tried long, short, demux 0-4 and also changing flags in lamedb. Mgcamd is decoding but I'm getting black screen.

 

By the way, in oscam, the BBC channels, when zapped to, are reported in log with CAID "0000" instead of "2600", so oscam doesn't even try to apply the BISS key. Do  you have any idea why?

Thank you

[iko]

I install script bbc_pmt_v5 on my DUO2 - telnet error:

 

currentSid: 0x4484

trying with demux /dev/dvb/adapter0/demux3

pmtPid: 0x19c8

Error(145): read (PID 0x19c8): Connection timed out

0x9f 0x80 0x32 0x1e 0x03 0x44 0x84 0x09 0x00 0x13 0x01 0x81 0x08 0x0c 0xfd 0xac 0xe7 0x10 0x00 0x00 0x01 0x82 0x02 0x08 0x03 0x84 0x02 0x19 0xc8 0x0d 0x19 0xc8 0x00 0x00

Error(145): read (PID 0x19c8): Connection timed out

 

Please help. On my DM 7020HD is all OK. Problem is on my VU+ DUO2 (image: OpenPLI 4).

[drhans]

unlike with Dreambox, you should use long mode with Vu+. And make sure you have correct flags in lamedb.

 

I install script bbc_pmt_v5 on my DUO2 - telnet error:

 

currentSid: 0x4484

trying with demux /dev/dvb/adapter0/demux3

pmtPid: 0x19c8

Error(145): read (PID 0x19c8): Connection timed out

0x9f 0x80 0x32 0x1e 0x03 0x44 0x84 0x09 0x00 0x13 0x01 0x81 0x08 0x0c 0xfd 0xac 0xe7 0x10 0x00 0x00 0x01 0x82 0x02 0x08 0x03 0x84 0x02 0x19 0xc8 0x0d 0x19 0xc8 0x00 0x00

Error(145): read (PID 0x19c8): Connection timed out

 

Please help. On my DM 7020HD is all OK. Problem is on my VU+ DUO2 (image: OpenPLI 4).

[jpuigs]

can someone who owns an ET9000 confirm that BBC3 / BBC4 runs or not as the ET9000 makes trouble with big symbolrate.

All other tv services are ok.

 

Thanks in advance

Andreas

 

 

BBC Three and BBC Four don't run on my ET9000, but as Robinson says both services run on CBBC and CBeebies chs.

 

I see 3 and 4 are working again.

[md10833]

Hi,

 

Can anyone confirm that BBC Three HD, CBBC HD and the radio channels are working? They are not working on my DM 7020 HD with oscam ymod 18.51.

 

Thanks.

[jpuigs]

Yes, they are working

[iko]

Thank you very much. Working all SD channels, HD only video. Why?

 

unlike with Dreambox, you should use long mode with Vu+. And make sure you have correct flags in lamedb.

[Robinson]

iko, you might want to read this: http://openpli.org/f...hing-in-lamedb/

[secaspider]

Hi , y a trying to follow, what to do, but iget crossed .
Can anybody write the steps to do it and how to run the scripts??
I would be pleased.
Thank you

[meier2k]

Hi Secaspider,

 

see post No. #432 of this thread ! It's all in this thread !

[secaspider]

Hi Secaspider,

 

see post No. #432 of this thread ! It's all in this thread !

Thank you very much i did step by step your instructions, but how i run the scripts? Does the image run automatically after a restart?. The openwebif i select no password, to make it easy., 

I tried again and the screen show the PTM message. Can you paste the lines of the bbc package channelsto put on lmdb?.

I don´t know what else could be ....  

[edyy]

the oscam_ymod to have only developed, the doscam_ v0.19 you can not be solution to this fund, is in the coding?

otherwise it works well in ymod_50, in long mode

Edited by edyy, 10 April 2014 - 12:44.

[gammgubbe]

I got it work on my DM800HDse running Newnigma2 (not latest release). Actually I had these channels Before they began to encrypt PMT but after encryption, black. Only issue I have now is I need to reboot DM if I want to Watch other channels (FTA works). I guess I need to do some tweaking. Currently I have the script in short mode.

Edited by gammgubbe, 10 April 2014 - 17:05.

[secaspider]

I follow the instructions of blady74 as well, and at less on demux0  working on short mode it is not freeze, but no picture at all, I am working with Mgcamd 1,38. Is there any line to add on the script mentioning the camd?

Thank you

[secaspider]

I follow the instructions of blady74 as well, and at less on demux0  working on short mode it is not freeze, but no picture at all, I am working with Mgcamd 1,38. Is there any line to add on the script mentioning the camd?

Thank you

I follow the instructions of blady74 as well, and at less on demux0  working on short mode it is not freeze, I am tryng long and it works ( well I guess, because zapping the channels they are not freeze)), but no picture at all, I am working with Mgcamd 1,38. Is there any line to add on the script mentioning the camd?

I did a search too because i cannot fine the lines to put on the file lamedb, and I got the PMT message

Thank you

This is my script v.5:

 

#!/bin/sh

 

scriptName="bbc_pmt_v5.py -t long -d /dev/dvb/adapter0/demux0 "

logName=/dev/null

#logName=/tmp/bbc_pmt.log

 

while [ 1 ]

do

echo "=== starting $scriptName" >> $logName

$scriptPath/$scriptName >> $logName 2>&1

echo "=== $scriptName exited..." >> $logName

done

Edited by secaspider, 10 April 2014 - 18:26.

[rick_o]

Well i would like to thank everyone involved with this task . I read this thread god knows how many times ,and now have this working on my duo using the long method .

 

thanks again

 

Ricky

[XL8tor]

Hi Everybody!

 

I have pretty much followed the directions in post #432, here's what I've done with my VU+ Uno in condensed form:

Loaded openpli 4.0

Updated opkg

Tried oscam_ymod but changed to a working version of mgcamd, 1.38.

Edited, transfered and 755'ed the files form bbc_pmt_v4.zip.

Some other housekeeping, like plugins and fpgaupdate...

 

Now the problem: How do I get or create the lamedb for

LNB 1 - Astra 19.2

LNB 2 - Hotbird 13.0

LNB 3 - Astra 28.2

LNB 4 - Intelsat 907 27.5W ?

 

I can't be sure that my 110cm antenna just south of Lake Chiemsee in Bavaria is lined up correctly, it's pointing a little to the left of where I found 628 stations at 30.0W. The other satellites are via 2 additional dishes.

Does someone perhaps have a current lamedb with my sats? Or the 27.5W data that I could edit in?

 

Thanx in advance

XL8tor (The Translator / German -> English)

[kamacnik1]

First of all,thanks for this script to anyone involved in development

 

i get it running on my dm800HD se with satdreamgr 4.0 image,v5 version of script

 

all channels work,both on short and long version on demux0,with audio and video

 

only problem ( and I read wholle thread,how things must be ) is after restart script not start automatically,only manualy by telnet command

 

what am I missing,and how to resolve this

 

try to put & in pmt starter.sh  without results

 

any help is welcome