1943 replies to this topic

[maxi]

Thanks to everyone the non help!!!

Problem solved.

[zakdk]

Allright guys. I tried almost everything.  all this isn't working with my openpil 4 vu+ Solo2.

Okay step by step. Dvbsnoop installed by opkg install dvbsnoop. only file from these 3 - I can run only bbd_pmt_v4.py python script. /etc/enigma2/lamedb edited as in post #288. Nothing works

[craig0069]

Allright guys. I tried almost everything.  all this isn't working with my openpil 4 vu+ Solo2.

Okay step by step. Dvbsnoop installed by opkg install dvbsnoop. only file from these 3 - I can run only bbd_pmt_v4.py python script. /etc/enigma2/lamedb edited as in post #288. Nothing works

hi zakdk did you get it working

[zakdk]

......kind of working with help from a member except for the Hd channels not clearing so i edited the lamb file and now nothing is opening..

[craig0069]

Not got mine working yet been trying for about a week. I too have vu+ solo2. Did you use long mode & have to put f4 in at the ends

[maxi]

4484:0cfdace7:1000:0001:25:0
BBC One HD
p:BBC,c:0019c9,c:0319c9,c:050001,c:1219ca,f:4

 

4440:0cfdace7:1000:0001:25:0
BBC Two HD
p:BBC,c:0017d5,c:0317d5,c:050001,c:1217d6,f:4

 

4600:0cfdace7:1000:0001:25:0
BBC Three HD
p:BBC,c:001b59,c:031b59,c:050001,c:121b5a,f:4

 

4500:0cfdace7:1000:0001:25:0
Channel 4 HD
p:Channel 4 Broadcasting,c:00189d,c:03189d,c:050001,c:12189e,f:4

 

44c8:0cfdace7:1000:0001:25:0
ITV1 HD
p:ITV,c:001839,c:031839,c:050001,c:12183a,f:04

 

46c0:0cfdace7:1000:0001:25:0
CBBC HD
p:BBC,c:001b59,c:031b59,c:050001,c:091B5D0101,c:121b5a,f:4

 

1044:0cfdace7:1000:0001:1:0
BBC ONE
p:BBC,c:000065,c:010066,c:030065,f:4

 

107c:0cfdace7:1000:0001:1:0
BBC ONE Scot
p:BBC,c:001005,c:011006,c:031005,f:4

 

107d:0cfdace7:1000:0001:1:0
BBC ONE NI
p:BBC,c:0013ed,c:0113ee,c:0313ed,c:0913f10101,f:4

 

107e:0cfdace7:1000:0001:1:0
BBC ONE Wales
p:BBC,c:000c1d,c:010c1e,c:030c1d,c:09c210101,f:4

 

10bf:0cfdace7:1000:0001:1:0
BBC TWO
p:BBC,c:0000c9,c:0100ca,c:0300c9,c:09cd0101,f:4

 

10c0:0cfdace7:1000:0001:1:0
BBC THREE
p:BBC,c:00012d,c:01012e,c:03012d,c:091310101,f:4

 

11c0:0cfdace7:1000:0001:1:0
BBC FOUR
p:BBC,c:000191,c:010192,c:030191,c:091950101,f:4

 

1200:0cfdace7:1000:0001:1:0
CBBC
p:BBC,c:00012d,c:01012e,c:03012d,c:091310101,f:4

 

1100:0cfdace7:1000:0001:1:0
BBC NEWS
p:BBC,c:0001f5,c:0101f6,c:0301f5,c:091f90101,f:4

 

1280:0cfdace7:1000:0001:1:0
BBC Parliament
p:BBC,c:000259,c:01025a,c:030259,f4

 

 

For long mode.....

[craig0069]

Ok thanks so much for help. I will try with the f4 tonight as I didn't put that on the end

[blady74]

I also tried submit in DCC Telnet : /usr/bin/bbc_pmt_v5.py -t short -d /dev/dvb/adapter0/demux0 as doublet said a cuople ago and 
Output is: 
wget: can't connect to remote host (127.0.0.1): Connection refused

I dont have also a webinterface connection. 

 

Please help.

[Robinson]

I understand you have to "repair" your Webinterface first.

You might need to reflash.

Edited by Robinson, 29 September 2014 - 09:03.

[blady74]

I understand you have to "repair" your Webinterface first.

You might need to reflash.

Any other ways (but reflashing) to repair webinterface?

[zakdk]

Not got mine working yet been trying for about a week. I too have vu+ solo2. Did you use long mode & have to put f4 in at the ends

.....craig i didnt have to edit lamedb as sd channels worked and editing made them dissapear,no luck with hd channels but working on it ,big thanks to andress66 couldnt do it without him...

[zakdk]

........can someone tell me why i lose SD channels if i do a manual scan with a yes on clear before scan ???????????

[craig0069]

many thanks to a member on hear for helping me,i still dont have it working but i understand it more now

i am trying to get it to work with other image first, also with mg""""" as anybody got this working this way

[zakdk]

All sorted again now. Special thanks to Andres66.

lamedb  configuration was incorrect but all in correct locations now!

 

It's been a very steep learning curve for me since losing 28.2E but firmly locked in my head now - and written down just in case of memory lapse. .....how do you solve epg ??

[BBC-Hörer]

 .....how do you solve epg ??

it is described in this thread.

Edited by BBC-Hörer, 30 September 2014 - 11:07.

[zakdk]

.......anyway if anyone has a similiar problem with epg have a read of post 377  and How to install and configure xmltv-import on Enigma2 Pli-images:

http://forums.openpl...l-xmltv-import/   .

[maxi]

Very good answer.......

[nico-lone]

Where can I find dvbsnoop working for openATV4.2? 

or some plugin to find the pid and see them on the menu of the cable box?

[kamacnik1]

did you try install them from telnet ? 

 

with command opkg install dvbsnoop

[nico-lone]

did you try install them from telnet ? 

 

with command opkg install dvbsnoop

yes, but it does not work

Edited by nico-lone, 8 October 2014 - 13:25.