1 reply to this topic

[DrAk3]

Hi all,
with the new kernel module (2-3 weeks ago) my a867 usv key doesn't works fine.
I used both driver tha support it (9035 or a867).
With the kernel-module-dvb-usb-af9035 i can't use th key because i receive this errors during the channel zapping:


mxl5007t 4-0060: creating new instance
mxl5007t_get_chip_id: unknown rev (3f)
mxl5007t_get_chip_id: MxL5007T detected @ 4-0060
dvb-usb: AVerMedia HD Volar (A867) successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_af9035
Console: switching to colour dummy device 80x25
mxl5007t_write_reg: 473: failed!
mxl5007t_init: error -140 on line 696
DVB: registering adapter 0 frontend 2 (vtuner)...
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 714
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 716
mxl5007t_write_reg: 473: failed!
mxl5007t_init: error -140 on line 696
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 714
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 716


with the kernel-module-dvb-usb-a867 the key works but the cpu load of the et9x00 is very very high and sound sometimes goes away...

is this only a problem of mine? why i can't use the 9035 module?

regards

D.

[guirigui]

Many topics complaining about A867 aka A9035 already...Just throw mine to the bin....
Same CPU high load on the ET6000....

Edited by guirigui, 7 January 2013 - 10:01.