358 replies to this topic

[christophecvr]

Dit staat helemaal los van de driverversie. Ik denk eerder dat je bijvoorbeeld de kernelargumenten vanuit de bootloadersettings overload?
Of dat in openpli4 nog niet de juiste cmdline (met ubifs rootfs) geselecteerd wordt.

 

Na het builden van upstream , zijn de files penpli-enigma2-3.0-dm8000.rootfs.ubi en openpli-enigma2-3.0-dm8000.rootfs.ubifs niet aanwezig zijn zoals bij openpli 3.0 .

Moet er misschien eerst nog een migratie commit pli3 naar pli4 komen waarbij dan de benodigde veranderingen aanwezig zijn ? Hoe onwaarschijnlijk ook , is het madwifi probleem misschien daarmee verbonden ?

[Loui (PD1LOI)]

Is er al een gedeelte of  complete OpenPli 4 die ik kan uitproberen?

 

Voor dm8000 nog niet daar er nog een probleem is met ubifs . Dus zal niet booten

We wachten gewoon af, ben wel nieuwsgierig hoe het eruit ziet en hoe het zal werken.

Edited by Loui (PD1LOI), 26 April 2013 - 07:59.

[MiLo]

Zonder madwifi bouwt en boot de 8000 weer onder OpenPLi4.

[Beeker]

Error enigma2-plugins. Waarschijnlijk veroorzaakt door commit http://sourceforge.n...aa6f3eb49af837/ ???? Iets met reconstructapsc.

 

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_configure (see /home/thomas/openpli-oe-core/build/tmp/work/dm8000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+2adb2414b2a5af2325852f1025aa6f3eb49af837-r10/temp/log.do_configure.16428 for further information)
ERROR: Logfile of failure stored in: /home/thomas/openpli-oe-core/build/tmp/work/dm8000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+2adb2414b2a5af2325852f1025aa6f3eb49af837-r10/temp/log.do_configure.16428
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: SITE files ['endian-little', 'bit-32', 'mips-common', 'common-linux', 'common-glibc', 'mipsel-linux', 'common']
| DEBUG: Executing shell function autotools_preconfigure
| DEBUG: Shell function autotools_preconfigure finished
| DEBUG: Executing shell function do_configure
| automake (GNU automake) 1.12.6
| Copyright © 2012 Free Software Foundation, Inc.
| License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Written by Tom Tromey <tromey@redhat.com>
|        and Alexandre Duret-Lutz <adl@gnu.org>.
| AUTOV is 1.12
| NOTE: Executing ACLOCAL="aclocal --system-acdir=/home/thomas/openpli-oe-core/build/tmp/work/dm8000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+2adb2414b2a5af2325852f1025aa6f3eb49af837-r10/git/aclocal-copy/ --automake-acdir=/home/thomas/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.12" autoreconf --verbose --install --force --exclude=autopoint -I /home/thomas/openpli-oe-core/build/tmp/work/dm8000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+2adb2414b2a5af2325852f1025aa6f3eb49af837-r10/git/m4/
| autoreconf: Entering directory `.'
| autoreconf: configure.ac: not using Gettext
| autoreconf: running: aclocal --system-acdir=/home/thomas/openpli-oe-core/build/tmp/work/dm8000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+2adb2414b2a5af2325852f1025aa6f3eb49af837-r10/git/aclocal-copy/ --automake-acdir=/home/thomas/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.12 -I /home/thomas/openpli-oe-core/build/tmp/work/dm8000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+2adb2414b2a5af2325852f1025aa6f3eb49af837-r10/git/m4/ -I /home/thomas/openpli-oe-core/build/tmp/work/dm8000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+2adb2414b2a5af2325852f1025aa6f3eb49af837-r10/git/m4/ --force -I m4
| autoreconf: configure.ac: tracing
| autoreconf: running: libtoolize --copy --force
| libtoolize: putting auxiliary files in `.'.
| libtoolize: copying file `./ltmain.sh'
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
| libtoolize: copying file `m4/libtool.m4'
| libtoolize: copying file `m4/ltoptions.m4'
| libtoolize: copying file `m4/ltsugar.m4'
| libtoolize: copying file `m4/ltversion.m4'
| libtoolize: copying file `m4/lt~obsolete.m4'
| libtoolize: Remember to add `LT_INIT' to configure.ac.
| autoreconf: running: /home/thomas/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf --include=/home/thomas/openpli-oe-core/build/tmp/work/dm8000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+2adb2414b2a5af2325852f1025aa6f3eb49af837-r10/git/m4/ --force
| autoreconf: running: /home/thomas/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/bin/autoheader --include=/home/thomas/openpli-oe-core/build/tmp/work/dm8000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+2adb2414b2a5af2325852f1025aa6f3eb49af837-r10/git/m4/ --force
| autoreconf: running: automake --foreign --add-missing --copy --force-missing
| configure.ac:60: error: required file 'reconstructapsc/po/Makefile.in' not found
| reconstructapsc/Makefile.am:1: error: required directory reconstructapsc/po does not exist
| autoreconf: automake failed with exit status: 1
| ERROR: autoreconf execution failed.
| ERROR: Function failed: do_configure (see /home/thomas/openpli-oe-core/build/tmp/work/dm8000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+2adb2414b2a5af2325852f1025aa6f3eb49af837-r10/temp/log.do_configure.16428 for further information)
ERROR: Task 277 (/home/thomas/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-plugins/enigma2-plugins.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 6617 tasks of which 6616 didn't need to be rerun and 1 failed.
No currently running tasks (6150 of 6638)

Summary: 1 task failed:
  /home/thomas/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-plugins/enigma2-plugins.bb, do_configure
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
 

Edited by Beeker, 31 May 2013 - 18:14.

[christophecvr]

Ter info.

 

Ik was een tijdje terug naar PLI30 gegaan.

 

Nu terug op PLI4 (upstream)

 

Op dm8000 alles ok. bouwt goed.  Denk dat mad wifi er niet in is maar is niet nodig.

Ook is het probleem aangaande mount of swap file of partitie opgelost (gaat terug via fstab en mount command)

 

Het enige is openembedded openssh-sftp-server module die zijn sftp-server module zet in /usr/lib/openssh/ terwijl deze in /usr/libexec  folder moet zijn.

Moet er wel bij zeggen dat ik niet de hele openssh van openembedded installeer is onnodig(ik beperk het gebruik van flash mem zo véél mogelijk de dm8000 heeft nogal weinig memory) voor een box daar er reeds een ssh is via dropbear die goed werkt. Enkel is dat moduletje nodig om gebruik te kunnen maken van nautilus,gftp of filezilla met ssh. Dit moduletje maakt dan gebruik van de aanwezige ssh libs met dropbear op de box.

Dit heb ik opgelost door de openssh_6.1p1.bb file in openpli-oe-core/openembedded-core/meta/recipes-connectivity/openssh  aan te passen. Deze maakt nu een extra pakketje die dan gewoon met opkg install kan installeren. Nu is dit tijdelijk, Verder onderzoek toont mij dat de libexecdir van de bitbake gebruikt in pli4 standaard niet meet /usr/libexec is . De bb file gebruikt deze well . Denk dat de bb file aanpassing voor openssh in de bb file eerst dient gezet te worden in EXTRA_OECONF daar ben ik aan het werken. is niet pli4 zelf maar openembedded-core bugje of eerder aanpasing

[Beeker]

Hier draaid openpli 4 helemaal in de soep na de commit van vandaag.Eerst problemen met task/Packagroup. Heb ik op kunnen lossen door in regel 4 in task-openplugin.bb te veranderen in:   inherit packagegroup \

Daarna probleem libdvdcss. Kunnen oplossen door als work-around het te verwijderen uit enigma2.bb


     # DVD playback is integrated, we need the libraries
       RDEPENDS_${PN} += "libdreamdvd"
      - RRECOMMENDS_${PN} += "libdvdcss"


Vervolgens libmusicbrainz in gst-plugins-bad_0.10.23.1. Er ook als work-around eruit gehaald.

       DEPENDS += "gst-plugins-base libmusicbrainz tremor curl libmms librtmp faad2"


Vervolgen met kernel. Daar heb ik helaas geen foutmelding meer van, maar allemaal declerations not defined/no function(iets in die trant) .

Ik had vanwege bovenstaande problemen de nieuwe pakketen zelfstandig laten bouwen. Dus bitbake gstreamer, bitbake busybox etc.

Dus voor de zekerheid de Build directory maar verwijderd en opnieuw laten bouwen.

Nu dit met CMake:


CMake Error at Modules/FindQt4.cmake:1037 (set_property):
|   set_property could not find TARGET Qt4::QtCore.  Perhaps it has not yet
|   been created.
| Call Stack (most recent call first):
|   Tests/CMakeLists.txt:263 (find_package)
|
|
| CMake Error at Modules/FindQt4.cmake:1040 (set_property):
|   set_property could not find TARGET Qt4::QtCore.  Perhaps it has not yet
|   been created.
| Call Stack (most recent call first):
|   Tests/CMakeLists.txt:263 (find_package)
|
|
| -- Could NOT find Qt4 (missing:  QT_MOC_EXECUTABLE QT_RCC_EXECUTABLE QT_UIC_EXECUTABLE QT_INCLUDE_DIR QT_LIBRARY_DIR QT_QTCORE_LIBRARY) (found version "4.8.4")
| -- Configuring incomplete, errors occurred!
| ---------------------------------------------
| Error when bootstrapping CMake:
| Problem while running initial CMake
| ---------------------------------------------
| ERROR: Function failed: do_configure (log file is located at /home/thomas/openpli-oe-core/build/tmp/work/x86_64-linux/cmake-native/2.8.11.1-r0/temp/log.do_configure.29930)
ERROR: Task 3881 (/home/thomas/openpli-oe-core/openembedded-core/meta/recipes-devtools/cmake/cmake-native_2.8.11.1.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1939 tasks of which 1894 didn't need to be rerun and 1 failed.
Waiting for 0 running tasks to finish:

Summary: 1 task failed:
  /home/thomas/openpli-oe-core/openembedded-core/meta/recipes-devtools/cmake/cmake-native_2.8.11.1.bb, do_configure
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
make: *** [image] Error 1



 

[Beeker]

Qtcore is dus wel geinstalleerd. Dit is de melding bij het compilen van linux-dreambox_3.2.bb

 

  CC      drivers/mtd/nand/nand_bbt.o
|   CC      fs/jffs2/fs.o
|   CC      drivers/mtd/nand/nand_ecc.o
| drivers/mtd/nand/nand_bbt.c: In function 'read_abs_bbts':
| drivers/mtd/nand/nand_bbt.c:386:3: warning: format '%d' expects argument of type 'int', but argument 2 has type 'int64_t' [-Wformat=]
|    pr_info("Bad block table at page %d, version 0x%02X\n",
|    ^
| drivers/mtd/nand/nand_bbt.c:395:3: warning: format '%d' expects argument of type 'int', but argument 2 has type 'int64_t' [-Wformat=]
|    pr_info("Bad block table at page %d, version 0x%02X\n",
|    ^
| drivers/mtd/nand/nand_bbt.c: In function 'search_bbt':
| drivers/mtd/nand/nand_bbt.c:614:4: warning: format '%d' expects argument of type 'int', but argument 2 has type 'int64_t' [-Wformat=]
|     pr_info("Bad block table found at page %d, version "
|     ^
|   LD      drivers/net/slip/built-in.o
|   CC      fs/jffs2/writev.o
|   CC      fs/lockd/mon.o
|   CC      fs/nfs/nfs2xdr.o
|   LD      drivers/net/ethernet/bcmemac/built-in.o

[MiLo]

D'r is nogal een boel bijgewerkt nu, nieuwe compiler, nieuwe busybox, nieuw libc, en talloze andere pakketten. Verder was ik nog bezig om 't allemaal weer bouwend en lopend te krijgen. De huidige stand bouwt weer.

 

Verwijderen van alle tussenresultaten (tmp en sstate-cache) is wel een keer aan te raden, hij moet nu toch al bijna alles opnieuw bouwen.

[MiLo]

O ja, en op Ubuntu 11 bouwt 't nu sowieso niet meer (zonder een boel handwerk). Dus als je net als ik al een half jaar "nee" zegt, nu toch maar een keer naar 12 over.

[Beeker]

Helaas build wordt weer afgebroken door CMake/Qt. Misschien heb je wat aan deze foutmelding? Ik werk met Ubuntu 13.04_x64.


-- Looking for wsyncup in /usr/lib/x86_64-linux-gnu/libcurses.so
| -- Looking for wsyncup in /usr/lib/x86_64-linux-gnu/libcurses.so - found
| -- Looking for elf.h
| -- Looking for elf.h - found
| -- Looking for a Fortran compiler
| -- Looking for a Fortran compiler - NOTFOUND
| qmake: could not find a Qt installation of ''
| CMake Warning at Modules/FindQt4.cmake:657 (message):
|   /usr/bin/qmake-qt4 reported QT_INSTALL_LIBS as "/usr/lib/x86_64-linux-gnu"
|   but QtCore could not be found there.  Qt is NOT installed correctly for the
|   target build environment.
| Call Stack (most recent call first):
|   Tests/RunCMake/CMakeLists.txt:79 (find_package)
|
|
| -- Looking for Q_WS_X11
| -- Looking for Q_WS_X11 - not found
| -- Looking for Q_WS_WIN
| -- Looking for Q_WS_WIN - not found
| -- Looking for Q_WS_QWS
| -- Looking for Q_WS_QWS - not found
| -- Looking for Q_WS_MAC
| -- Looking for Q_WS_MAC - not found
| CMake Error at Modules/FindQt4.cmake:1032 (set_property):


Dropbear komt met *** Manual patch resolution mode ***

Applying patch disable-reverse-dns-lookups.patch
patching file options.h
Hunk #1 FAILED at 144.
1 out of 1 hunk FAILED -- saving rejects to file options.h.rej
Applied patch disable-reverse-dns-lookups.patch (forced; needs refresh)
System-Product-Name:~/openpli-oe-core/build/tmp/work/mips32el-oe-linux/dropbear/2013.58-r2.0/dropbear-2013.58$
 

[Beeker]

CMake/Qt opgelost door:  sudo apt-get install libqt4-dev qt4-dev-tools.

Nu nog linux-dreambox_3.2.bb.
 
Error:


arch/mips/mm/page.c:89:6: error: 'clear_page' alias in between function and variable is not supported
void clear_page(void *page) __attribute__((alias("clear_page_array")));
       ^
arch/mips/mm/page.c:84:12: error: 'clear_page_array' aliased declaration [-Werror]
static u32 clear_page_array[0x120 / 4];
             ^
arch/mips/mm/page.c:108:6: error: 'copy_page' alias in between function and variable is not supported
void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
      ^
arch/mips/mm/page.c:102:12: error: 'copy_page_array' aliased declaration [-Werror]
static u32 copy_page_array[0x540 / 4];


Code van arch/mips/mm/page.c van regel 84 t/m 108

             
84   static u32 clear_page_array[0x120 / 4];
85
86   #ifdef CONFIG_SIBYTE_DMA_PAGEOPS
87   void clear_page_cpu(void *page) __attribute__((alias("clear_page_array")));
88   #else
89   void clear_page(void *page) __attribute__((alias("clear_page_array")));
90   #endif
91
92   EXPORT_SYMBOL(clear_page);
93
94   /*
95    * Maximum sizes:
96    *
97    * R4000 128 bytes S-cache:        0x11c bytes
98    * R4600 v1.7:                0x080 bytes
99    * R4600 v2.0:                0x07c bytes
100   * With prefetching, 16 word strides    0x540 bytes
101   */
102   static u32 copy_page_array[0x540 / 4];
103
104   #ifdef CONFIG_SIBYTE_DMA_PAGEOPS
105   void
106   copy_page_cpu(void *to, void *from) __attribute__((alias("copy_page_array")));
107   #else
108   void copy_page(void *to, void *from) __attribute__((alias("copy_page_arr

 

[christophecvr]

Ter info openpli4 does not build anymore ubuntu 12.04 at the very beginning error message

 

Building image for dm8000
NOTE: Your conf/bblayers.conf has been automatically updated.
ERROR: ParseError at /home/christophe/openpli40/openpli-oe-core/meta-openpli/recipes-openpli/e2openplugins/task-openplugins.bb:4: Could not inherit file classes/task.bbclass                      | ETA:  --:--:--
ERROR: Command execution failed: Exited with 1

Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [image] Fout 1
 

Nu dit probleem kan opgelost worden door DeBeeker's work around,

 

Nu zijn de daaropvolgende problemen opgelost ? Anders heeft het geen zin daar ik die libscss libdvdcss allen echt nodig heb.

[christophecvr]

Nee die problemen zijn inderdaad niet opgelost .

 

  NOTE: Resolving any missing task queue dependencies
ERROR: Nothing RPROVIDES 'libdvdcss' (but /home/christophe/openpli40/openpli-oe-core/meta-openpli/recipes-openpli/enigma2/enigma2.bb RDEPENDS on or otherwise requires it)
NOTE: Runtime target 'libdvdcss' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['libdvdcss']
ERROR: Required build target 'openpli-enigma2-image' has no buildable providers.
Missing or unbuildable dependency chain was: ['openpli-enigma2-image', 'enigma2', 'libdvdcss']

Summary: There were 7 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [image] Fout 1

 

Image zonder libdvdcss is absoluut no go. Voor mij.

 

Jammer dus even wachten -

[Beeker]

En dan is ook nog maar de vraag of de kernel  wil bouwen? Was eigenlijk wel benieuwd.

[christophecvr]

The lib css is solved by using vlc out off the previous upstream. Vlc in not anymore into openembedded and that's why libdvdcss is missing

 

The next musicbrainz , i just give it a try with that from pli30 and set it into folder openpli-oe-core/openembedded-core/meta/recipes-multimedia

 

Vlc from previous pl4 upstream is setted in map openpli-oe-core/meta-openembedded/meta-oe/recipes-multimedia

 

Now it's building keep fingers cross I hope I can avoid having to go back to pli 30 with one off my boxes

[christophecvr]

its  building but will not work out as I have already a pop up

 

*** Manual patch resolution mode ***
Dropping to a shell, so patch rejects can be fixed manually.
Run "quilt refresh" when patch is corrected, press CTRL+D to exit.

Applying patch disable-reverse-dns-lookups.patch
patching file options.h
Hunk #1 FAILED at 144.
1 out of 1 hunk FAILED -- saving rejects to file options.h.rej
Applied patch disable-reverse-dns-lookups.patch (forced; needs refresh)
christophe@stefan2l:~/openpli40/openpli-oe-core/build/tmp/work/mips32el-oe-linux/dropbear/2013.58-r2.0/dropbear-2013.58$ 

The build is still running

[MiLo]

The disable-reverse-dns-lookups needs to be removed, it was (sort of) merged upstream. Somehow this change didn't make into my last push.

To build musicbrainz, modify the bblayer list in your conf directory to include "meta-multimedia" from meta-openemebedded. I'll update the makefile to do this some day.

The rest of the problems I haven't encountered yet. I have a running image to prove it

Edited by MiLo, 9 July 2013 - 15:32.

[christophecvr]

indeed core does not build

 

ERROR: Task 713 (/home/christophe/openpli40/openpli-oe-core/meta-openpli/recipes-linux/linux/linux-dreambox_3.2.bb, do_compile) failed with exit code '1'

[christophecvr]

The disable-reverse-dns-lookups needs to be removed, it was (sort of) merged upstream. Somehow this change didn't make into my last push.

To build musicbrainz, modify the bblayer list in your conf directory to include "meta-multimedia" from meta-openemebedded. I'll update the makefile to do this some day.

The rest of the problems I haven't encountered yet. I have a running image to prove it

 

Ok but the build is still running now.

 

Just for info after the bb list is modified , whats the best way to stash since the ads I did now self are in submodule openembedded-core , and I never succeeded in stashing them in order to update the submodule. I always had to erase everrything

and rebuild from scratch which is a bit a pain in the ass

[christophecvr]

Yes i saw that vlc is also in there in meta multimedia. I first will again build from scratch and apply the changes You told before.

 

But how to remove the The disable-reverse-dns-lookups ?