351 replies to this topic

[WanWizard]

If that is the OpenPLi mod in the feeds: the picons work fine (I use a derivative of that skin myself).

 

If that is a manually installed (original) skin: chances as it will use it's own picon renderer, which is not OpenPLi compatible.

[UnimatriX]

I can't remember. Installed it several months ago, never used it. How can i check this?

[WanWizard]

If you installed it from the feed, it should be listed as installed under menu - plugins - red button.

Attached Files

•  1_0_1_189D_7FD_2_11A0000_0_0_0.jpg   228.4KB   300 downloads

[UnimatriX]

@WanWizard: thanks!

It was a manual installation so that has to be the problem.

[WanWizard]

The problem often is that people assume that since OpenPLi runs Enigma2, you can install everything ever written for any Enigma2, and it will work. So they download ipk's from the internet (or even tarball), and load them.

 

Unfortunately, it doesn't. An OpenPLi image is not compatible with a Dream Multimedia image, our codebase deviated from the last available open source version a long time ago. Some things will still work (because we haven't changed it compared to a DMM image), but others don't.

 

A skin is a typical example, OpenPLi uses a different skin renderer from a DMM image, with other features, other feature renderers, etc. So the chances of having a working box after installing an unmodified skin aren't that high.

[UnimatriX]

Ok,

I tried metrixhd-wpstyle-mod-pli, XPicons work fine with this one, exept i use zoom function on tv..

Then i tried mymetrixhd (1.5) from feed. Here most XPicons won't load (just like original mymetrix hd 2.014 wich inhad installed before).

I use ocram-shd-transparent-white-nopadding.

Problem has to be something else..
Any ideas?

[WanWizard]

It all depends on whether or not the skin has been adapted to use the OpenPLi picon renderer. Which appearently is not the case for mymetrixhd.

[Meega]

Ok,

I tried metrixhd-wpstyle-mod-pli, XPicons work fine with this one, exept i use zoom function on tv..

Then i tried mymetrixhd (1.5) from feed. Here most XPicons won't load (just like original mymetrix hd 2.014 wich inhad installed before).

I use ocram-shd-transparent-white-nopadding.

Problem has to be something else..
Any ideas?

Did you update Openpli today or yesterday ,because ocram changed things for the good.

Haven't tested mymetrix.

[UnimatriX]

Files are from yesterday

[WanWizard]

Currently the ocram feed doesn't work, pending a change of the buildserver. But if you have picons locally, they should still work fine.

[bobjuventini]

my picon works on usr/share/enigma2/XPicons/picon 

but on media/usb/XPicons/picon dont work

what can I do? thanx

[WanWizard]

XPicons is not something the OpenPLi picon renderer supports, it looks for a 'picon' folder in the mount root. It is something skin specific, supported by custom Python code, that hasn't been written for OpenPLi, and may or may not (as this case may be) work.

 

I seem to be repeating myself. If something hasn't been specifically made (or made compliant) for OpenPLi, chances are it doesn't work.

[bobjuventini]

XPicons is not something the OpenPLi picon renderer supports, it looks for a 'picon' folder in the mount root. It is something skin specific, supported by custom Python code, that hasn't been written for OpenPLi, and may or may not (as this case may be) work.

 

I seem to be repeating myself. If something hasn't been specifically made (or made compliant) for OpenPLi, chances are it doesn't work.

sorry and

thanx m8 

[UnimatriX]

Ok,

I tried metrixhd-wpstyle-mod-pli, XPicons work fine with this one, exept i use zoom function on tv..

Then i tried mymetrixhd (1.5) from feed. Here most XPicons won't load (just like original mymetrix hd 2.014 wich inhad installed before).

I use ocram-shd-transparent-white-nopadding.

Problem has to be something else..
Any ideas?

Did you update Openpli today or yesterday ,because ocram changed things for the good.
Haven't tested mymetrix.

Can you check mymetrix again? (Before i install everything all over ;-) )

[Meega]

Oke ,i updated the picons from ocram website and put them in /media/usb/Xpicons/picon.

They work ,only i have to say that it are the tv-ocram.hd.reflection.black (2013-12-08-19-59-03)

 

Xpicons (shd), i did not check because of the size.

[bluekachina]

hello, what must i chane to be able to see the ecm time in the first infobar of the last version of this skin? thanks

 

I don't know what version of this skin does TSimage (it says however imaxxx by colombo555) use but there this ecm time is perfectly included in the first infobar (no need to 2xOK)

Edited by bluekachina, 11 December 2013 - 18:52.

[difficult_guy]

Dear Community,

 

Together with IPMAN (mostly his work) we were able to port MyMetrixHD skin originally created by iMaxxx for our OpenPLI 3.0 image. Skin is fully customizable via plugin and it supports all features as the original skin for VTi including auto-update (http://mymetrix.de)

 

Skin is based on version 1.1b.

 

I've also created a public repository, so anyone is invited with their ideas. Anyone can contribute to improve this plugin, which is in my opinion the best skin for enigma2 devices. You can also report bugs there. We will try to fix them as soon as possible.

 

GitHub repository: https://github.com/M...ugin-MyMetrixHD

 

You may find the actual binary version with installation instruction here.

 

I installed this skin twice but I had to remove it from my dreambox dm800 pvr (original) as its info bar wont fit in my TV. I changed my tv, reinstalled openpli but still it wont fit into my tv......

[ARNOLD65]

Hello everybody. I like this skin, but i can not configure. I have openpli 3.0 in a et9200, and openpli4.0 in a vuduo2. Same problem in two boxes. I installed this skin from the box (via plugin-download, etc), and work fine, but not appear weather information, and i can not configure the skin. In plugins-download-skins, i see the plugin Mymetrixhd. I download this, but error. This problem in two boxes.

 

Solutions ?

[WanWizard]

I installed this skin twice but I had to remove it from my dreambox dm800 pvr (original) as its info bar wont fit in my TV. I changed my tv, reinstalled openpli but still it wont fit into my tv......

 

If it doesn't "fit", chances are your TV is in overscan mode instead of in full HD mode. That can cost you up to 5% along the edges.

 

Most TV's have that as default setting, and most can be switched in the TV menu. If you're using an old CRT on scart, you're out of luck on virtually all TV's.

[UnimatriX]

Update:

 

Now XPicons work on my VU+ Solo2 with OpenPLi 4.0 and original MyMetrix v2.0.14 

 

I copied the tv-ocram.shd.transparent-white-nopadding picons in usr/share/enigma2/XPicons/picon (I tried the same last weekend, but then it didn't work).

Then I replaced the default IconBar with the OpenPli3 Iconbar and installed OpenPLi Neue SchriftArt. This works perfectly for OpenPLi 4.0!

 

It would be nice though if the /XPicons/picon folder could be directly linked to the standard /picon folder, so when the feed updates ocram picons the MyMetrix skin can use them right away! --> Anyone knows if this is possible?

 

Thanks for all the help!

Greetings UnimatriX