If the plugin has a public source (e.g. at code.vuplus.com) please supply the url, so we can merge it into the native feed.
[VU+ SOLO2] How to use the transcoding plugin?
Re: [VU+ SOLO2] How to use the transcoding plugin? #81
Posted 29 September 2013 - 19:29
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: [VU+ SOLO2] How to use the transcoding plugin? #82
Posted 29 September 2013 - 19:39
Re: [VU+ SOLO2] How to use the transcoding plugin? #83
Posted 29 September 2013 - 19:43
You can try the attached version of the plugin. Unzip to /usr/lib/enigma2/python/Plugins/SystemPlugins
TransCodingSetup.zip
Thanks.
I understand I just get rid of what is inside the folder at the moment:
- __init__.py
- __init__.pyo
- plugin.py
- plugin.pyo
and replace it with the following:
- locale folder
- __init__.pyo
- plugin.pyo
- setup.xml
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: [VU+ SOLO2] How to use the transcoding plugin? #84
Posted 29 September 2013 - 20:18
You can try the attached version of the plugin. Unzip to /usr/lib/enigma2/python/Plugins/SystemPlugins
TransCodingSetup.zip
thx Satkiekerd
VU+ Ultimo 4K - 78 Triax met triple Quad
Re: [VU+ SOLO2] How to use the transcoding plugin? #85
Posted 1 October 2013 - 18:13
You can try the attached version of the plugin. Unzip to /usr/lib/enigma2/python/Plugins/SystemPlugins
TransCodingSetup.zip
Hi,
It seems to the job, especially as regards bitrate.
As regards framerate, however, the below message pops up. In the end, though, the rate seems to be changed, which shows after hitting OK on this screen.
Attached Files
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: [VU+ SOLO2] How to use the transcoding plugin? #86
Posted 1 October 2013 - 18:14
The solo2 doesn't support setting framerate afaik.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: [VU+ SOLO2] How to use the transcoding plugin? #87
Posted 1 October 2013 - 19:16
20130819
- Fix DTSHD downmix & passthrough
- Support more than 4 tuners(vtuner) in duo2 and ultimo
- Fix DVB-C/T tuner recognition(duo2)
- Fix play/pause in solo2(when duo2's new remote control is used)
- Fix Xcrypt card detection problem(duo2, solo2, uno, ultimo)
- Support transcoding bitrate/framerate setup (solo2, 50K<bitrate<1M, Change is in effect in the subsequent connection )
It is not 100% clear but I would assume both bitrate and framerate have been supported since August driver update.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: [VU+ SOLO2] How to use the transcoding plugin? #88
Posted 1 October 2013 - 19:19
I just checked, the /proc file is there, indeed. So either there is an error in the plugin, or in the driver... You might want to try it writing to the /proc files directly, go to /proc/stb/encoder/0.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: [VU+ SOLO2] How to use the transcoding plugin? #89
Posted 20 October 2013 - 16:59
@SatKiekerd #68
I added a config value so users can turn on/off this line for now. Later, we should decide to remove this additional part only for transcoded stream or leave the config value.
Is there any advantage for any application to have the now omitted line available? Any mobile player uses it?
Yes, this line (#EXTVLCOPT:program=PMT) is important to stream
-CSAT Radios https://trac.videola...4264#comment:20
-some Polish PayTV channels http://openpli.org/f...ndpost&p=265927
-some Viacom channels from Germany https://trac.videola...vlc/ticket/4480
to VLC.
OpenPli webif is the only software capable of doing so thanks to a patch by Scuotivento
https://github.com/E...b7fdb0f56838e2b
Please don't kill this functionality. Having the option to turn it off is OK, disabling it automatically when transcoding would be perfect.
#BTW: As this is my first post: Hello everyone. Very promising work here! I'm on a DM8000.
Re: [VU+ SOLO2] How to use the transcoding plugin? #90
Re: [VU+ SOLO2] How to use the transcoding plugin? #91
Posted 29 October 2013 - 13:17
Hi guys.
After today's OpenPLi upgrade on Solo2 I cannot get Transcoding to work.
Would the following have something to do with it?
Oct 29 10:24:35 vusolo2 authpriv.info dropbear[788]: Child connection from 192.168.2.232:50192 Oct 29 10:24:39 vusolo2 authpriv.warn dropbear[788]: User 'root' has blank password, rejected Oct 29 10:24:43 vusolo2 authpriv.warn dropbear[788]: User 'root' has blank password, rejected Oct 29 10:24:49 vusolo2 authpriv.warn dropbear[788]: User 'root' has blank password, rejected Oct 29 10:25:05 vusolo2 authpriv.warn dropbear[788]: User 'root' has blank password, rejected Oct 29 10:25:08 vusolo2 authpriv.warn dropbear[788]: User 'root' has blank password, rejected Oct 29 10:25:11 vusolo2 authpriv.warn dropbear[788]: User 'root' has blank password, rejected Oct 29 10:25:14 vusolo2 authpriv.warn dropbear[788]: User 'root' has blank password, rejected Oct 29 10:25:16 vusolo2 authpriv.warn dropbear[788]: User 'root' has blank password, rejected Oct 29 10:25:20 vusolo2 authpriv.warn dropbear[788]: User 'root' has blank password, rejected Oct 29 10:25:23 vusolo2 authpriv.info dropbear[788]: Exit before auth (user 'root', 9 fails): Exited normally Oct 29 10:25:38 vusolo2 authpriv.info dropbear[789]: Child connection from 192.168.2.232:50195 Oct 29 10:25:47 vusolo2 authpriv.warn dropbear[789]: User 'root' has blank password, rejected Oct 29 10:25:49 vusolo2 authpriv.info dropbear[789]: Exit before auth (user 'root', 1 fails): Exited normally
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: [VU+ SOLO2] How to use the transcoding plugin? #92
Posted 29 October 2013 - 19:15
dropbear is the SSH daemon, and that refuses to start if root has no password. I can't imagine it would be related to transcoding.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: [VU+ SOLO2] How to use the transcoding plugin? #93
Re: [VU+ SOLO2] How to use the transcoding plugin? #94
Re: [VU+ SOLO2] How to use the transcoding plugin? #95
Posted 29 October 2013 - 19:29
betacentauri, it is actually my friend's box and I'm trying to help him get transcoding to work and I'm trying to find a reason why it is not working.
These could have been his own attempts I would assume.
Unfortunately, he keeps getting the following on VLC:
Your input can't be opened:
VLC is unable to open the MRL 'http://192.168.2.150...E:820000:0:0:0:'. Check the log for details.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: [VU+ SOLO2] How to use the transcoding plugin? #96
Posted 30 October 2013 - 14:01
Hi,
Can you please test this url:
http://192.168.2.150...e:820000:0:0:0:
I just define the hexa value in lowercase instead of uppercase, who knows, in the lamedb they are encoded in lowercase...
Do you also enable transcoding the Openpli setup, by default it is not activated.
Pr2
Edited by Pr2, 30 October 2013 - 14:02.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: [VU+ SOLO2] How to use the transcoding plugin? #97
Posted 5 November 2013 - 20:03
I've checked and there is still a problem with transcoding on my Solo2, although it worked fine on OpenPLi from several weeks ago.
No problem with normal streaming at all.
I've tried both VLC and Media Player Classic. They both work OK for 8001 streaming but not for 8002 transcoding.
TranscodingSetup is set to ENABLE and no opening ports on the router is necessary because I'm testing it in LAN.
Also, "Add service name to stream information" is set to NO.
VLC gives me that:
Your input can't be opened:
VLC is unable to open the MRL 'http://192.168.1.107...E:820000:0:0:0:'. Check the log for details.
MPC gives me that:
Failed to render the file
Can anyone please test transcoding on Solo2 with any recent OpenPLi?
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: [VU+ SOLO2] How to use the transcoding plugin? #98
Posted 5 November 2013 - 20:19
By the way, Enigma2 log gives me something like that when trying to use transcoding (on a Windows computer, not a phone):
[OpenWebif] page '/web/stream.m3u?ref=1%3A0%3A1%3A3ABD%3A514%3A13E%3A820000%3A0% 3A0%3A0%3A&name=TVP+1+HD&device=phone' ok (custom)
Is this correct?
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: [VU+ SOLO2] How to use the transcoding plugin? #99
Posted 5 November 2013 - 23:42
Just tried it here on a Duo2, and it works (with VLC) without problems, so I think we can rule out OpenWebIf. I don't have a Solo2 here, so I can't test that.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: [VU+ SOLO2] How to use the transcoding plugin? #100
Also tagged with one or more of these keywords: transcoder, solo2
VuSolo2 Flash bricht abStarted by snake.bite, 25 Aug 2024 vu+, solo2, flash, image |
|
|||
No data on transponder! (Timeout reading PAT) [Solo2]Started by VeryClear, 3 Jul 2024 solo2 |
|
|||
Setup/Software Update leads to crash/hangStarted by VeryClear, 17 Dec 2023 Solo2 |
|
|||
Solo2 img v6.2 20181231 was not found on this serverStarted by Odyssey, 2 Jan 2019 Solo2 |
|
|||
Vu+ Solo2 crasht continu na upgrade van vandaagStarted by pst, 31 May 2018 vu+, solo2, crash, epg and 1 more... |
|
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users