216 replies to this topic

[Pedro_Newbie]

The IPK posted in post #13 is themost complete package but still requires an internet connection because the package mtd-utils has to been fetched from the feed.

mtd-utils requires other packages/files e.g.

Depends: libz1 (>= 1.2.6), liblzo2-2 (>= 2.06), libuuid1 (>= 2.21), libc6 (>= 2.13)

 

But in Openpli 3.0 the installation should be fine as far as I know, otherwise you should try several times

[Autodakt]

Now with backupsuite 2.7 I have a full functional PLi 4 Solo2-Receiver. All plugins are again installed. All is best. But I cannot see any difference to PLi 3. I feel that all is a Little bit faster.

[hemertje]

there are no differences for the normal users, see our statements before

we updated the buildenvironment on our buildserver and named the firmware OpenPLi 4.0

[Autodakt]

@ hemertje

 

Ok. I understand. I think I've found some differences/corrections in technique of Connection between some pathes and plugins and reducing number of files.

Why there is a registry.mipsel.bin? I'm new in Linux.

[Biged]

Hello

I wanted to install and test your image OpenPLi 4.0 beta vuduo2

I have some questions to ask
How do you type the letters from the remote control? I tried but I can only write numbers
Why when I put in deep standby I am no longer able 'to rekindle the remote control?
where can I  find The drivers for the stylus DTT A867?  I tried to install one among the drivers in the plugin but they do not work.

Thanks for any reply

Ps sorry for my bad english

 

[kleinerjunge]

Hi.

 

Were ALL problems with the feeds fixed now?

 

cu

KJ

[Biged]

I installed this image

OpenPLi-4.0-beta-vuduo2-20130815_usb

[Hump]

Installed OpenPLi 4.0 onto my et9x00 with no problem at all. The box runs perfect with all plugins configured.

 

thanks to the PLi-Team.

[littlesat]

Indeed I can also confirm that at least from yesterday evening all feeds, including the 3rd parties, are fine....

[kleinerjunge]

Hi!

 

Just installed OpenPLI 4.0 on Vu+ Duo² and getting this error when installing mgcamd:

 

root@vuduo2:~# opkg install enigma2-plugin-softcams-mgcamd
Deprecated version constraint '>' was used with the same meaning as '>='. Use '>>' for LATER constraint.
Deprecated version constraint '>' was used with the same meaning as '>='. Use '>>' for LATER constraint.
Deprecated version constraint '>' was used with the same meaning as '>='. Use '>>' for LATER constraint.
Deprecated version constraint '>' was used with the same meaning as '>='. Use '>>' for LATER constraint.
Deprecated version constraint '>' was used with the same meaning as '>='. Use '>>' for LATER constraint.
Deprecated version constraint '>' was used with the same meaning as '>='. Use '>>' for LATER constraint.
Installing enigma2-plugin-softcams-mgcamd (1.35a-r6) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-4/3rd-party/enigma2-plugin-softcams-mgcamd_1.35a-r6_mips32el.ipk.
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-softcams-mgcamd:
 *      libcrypto0.9.8 (>= 0.9.8x) *    libcrypto0.9.8 *        libssl0.9.8 * 
 * opkg_install_cmd: Cannot install package enigma2-plugin-softcams-mgcamd.

 

PLI 4.0 using new version 1.0.0 of libcrypto and libssl...

 

Can you adapt this?

 

cu

KJ

[mirakels]

No we cannot adapt this as we do not create this mgcamd tool. The developper of it should rebuild it with openssl 1.0.

[Biged]

mha!!!

 

I ask the question again

 

I can only write numbers with the remote control but I can't write letters of the alphabet, so what shall I do???

[littlesat]

[repeat]Press the button were you normally see the recordings.... [/repeat]

Then a virtual keyboard should appear... You can type there SMS style (2=ABC, 3=DEF etc)... or just go with the curser to the character you want to type.

Edited by littlesat, 16 August 2013 - 13:03.

[Biged]

No 

I'm sorry but it doesn't open anything

no virtual keyboard .

[Biged]

as from screen shot that I include It is  not possible to type any character

 

I have pressed the buttom you said but nothing appears

Attached Files

•  screenshot.jpg   27.75KB   164 downloads

[dirocca]

i can confirm; have same problem.

 

grtz philip

[Biged]

Hello

I wanted to install and test your image OpenPLi 4.0 beta vuduo2

I have some questions to ask
How do you type the letters from the remote control? I tried but I can only write numbers
Why when I put in deep standby I am no longer able 'to rekindle the remote control?
where can I  find The drivers for the stylus DTT A867?  I tried to install one among the drivers in the plugin but they do not work.

Thanks for any reply

Ps sorry for my bad english

II give up , I will be waiting for better times

bye bye 

Edited by Biged, 16 August 2013 - 17:39.

[ZZTop]

me too, have same issue

[malakudi]

No we cannot adapt this as we do not create this mgcamd tool. The developper of it should rebuild it with openssl 1.0.

 

mgcamd is no longer developed for mips. Last version is 1.35a . In OpenPLI 3.0 there is the package libcrypto-compat that provides the needed libcrypto 0.9.7. 

[kleinerjunge]

So, if it is no longer developed, then PLI should provide older libcrypto-compat in PLI4.0, so that mgcamd can be further used, don't they?

 

If not, mgcamd can't and never will be used with OpenPLI 4.0, I mean when you want to install all from feed...

 

cu

KJ