216 replies to this topic

[pieterg]

I suggest it is better to make a fix in opkg then inducing a work-a-round...

and as far I remember this was done once by pieterg... but it seems this issue came back somehow...

I fixed some opkg performance issues back then, but I could not debug the picon update, because we did not have a reproducable update producure at the time.
If we have now, I'd be happy to put a bit more time in.

http://sourceforge.n...c917b27b05af96/

picon updates should be a lot faster now

[ims]

what about checksums in linux-libc-headers_3.1.bb and linux-libc-headers_3.3.bb ? Is it my problem in some setting or why must I change in .bb files md5 and sha256 and is not it repaired there in openpli4 repo ?

Edited by ims, 2 September 2013 - 14:49.

[arneande]

Am tried flash 4.0 on my 8000,but trouble stop whwn engima2 try to boot

so am reflash with 3.0 again

any soulutions

 

tried both 31 aug and 1sept img

 

regards

arneande

[clweb]

Am tried flash 4.0 on my 8000,but trouble stop whwn engima2 try to boot

so am reflash with 3.0 again

any soulutions

 

tried both 31 aug and 1sept img

 

regards

arneande

I flashed my DM8000 today with the 2 sept. PLi 4 image: no problem.

Edited by clweb, 2 September 2013 - 16:28.

[TheSwede1970]

Just got my new Solo2 today and would love to install Pli4 with working MgCamd, hope this will be available soon.

[arneande]

Am tried flash 4.0 on my 8000,but trouble stop whwn engima2 try to boot

so am reflash with 3.0 again

any soulutions

 

tried both 31 aug and 1sept img

 

regards

arneande

I flashed my DM8000 today with the 2 sept. PLi 4 image: no problem.

okey thanks am try later

[frankviana]

First test... (dm800se): restored all my plugins (autobackup).

 

 openpli4.0.jpg   69.05KB   131 downloads

 

Frank

========

 

[frankviana]

First test... (dm800se): restored all my plugins (autobackup).

 

openpli4.0.jpg

 

Frank

========

Problem: can't access ftp. I changed the password and I have only telnet access.

 

Frank

===============

[MiLo]

Reflash. That solves it.

[cenko]

 

I am having a picons problem. When I tried to install picons online using install plugins, HD transparent picons work but tv.east.7 picons do not work.
It seems it installs but picons for 7East can not be seen.
Is it something wrong with the plugin or something has to be done. There were no problems with OpenPLİ 3 and this plugin.

What plugin installs picons? What do you mean by "does not work"? Have you tried just installing from the built-in downloader? Which is "the plugin"?

I use the built-in downloader. I go to plugins press green button to download plugins. I choose picons and install plugins.

It installs every picons I choose without any problem. I installed first ocram-hd-reflection-black and and works perfect. I can see the picons when I zap channels.

But ocram-hd-reflection-black picon plugin does not have picons for 7East. So I installed tv-east-7 picon plugin in the same way using the built-in downloader.

It was installed OK but when I zap 7East chanells, I can not see the picons. This is what I mean by "does not work". There was no problem with OpenPLİ 3.0 and this picon plugin.

 

Thank you very much in advance.

This problem still exist. Any solution for this?

Thanks.

[honda-civic]

Today's image boots ok but Oscam not working

[hemertje]

Today's image boots ok but Oscam not working

See the Oscam board for a new working Oscam version

[honda-civic]

I have from Oscam board but not working the last from him

 

Hello since 02-09-2013 We have the image for openpli 4.0 avbl for dm8000 and other mipsel tuxbox devices
(for dm800 I do not know) The latest openpli is now based on openssl 1.0.1 and not 0.9.8 anymore.
This binary is made for those images and not compatible with oe 2.0 or older pli3 images anymore

But if You need ssl with this image required.

It's almost complete libusb static included, libssl and all other dynamically linked.

The attached file does contain oscam binary and list_smargo 

 

[honda-civic]

Version:        oscam-1.20-unstable_svn-r0

yes work now I made ​​update and downloaded again from feed

 

 

Unix starttime: xx
Starttime:      03.09.2013 10:35:48
Version:        oscam-1.20-unstable_svn-r0

Web interface support:         yes
Touch interface support:       yes
SSL support:                   yes
DVB API support:               yes
DVB API with AZBOX support:    no
DVB API with MCA support:      no
DVB API with COOLAPI support:  no
DVB API with STAPI support:    no
Anti-cascading support:        yes
Irdeto guessing:               yes
Debug mode:                    yes
Monitor:                       yes
Loadbalancing support:         yes
CW Cycle Check support:        yes
LCD support:                   no
LED support:                   no
IPv6 support:                  no
Cache exchange support:        yes

camd 3.3x:                     no
camd 3.5 UDP:                  yes
camd 3.5 TCP:                  yes
newcamd:                       yes
CCcam:                         yes
CCcam share:                   yes
Pandora:                       yes
ghttp:                         no
gbox:                          yes
radegast:                      yes
serial:                        yes
constant CW:                   yes

Reader support:                yes

Nagra:                         yes
Irdeto:                        yes
Conax:                         yes
Cryptoworks:                   yes
Seca:                          yes
Viaccess:                      yes
NDS Videoguard:                yes
DRE Crypt:                     yes
TONGFANG:                      yes
Bulcrypt:                      yes
Griffin:                       yes
DGCrypt:                       yes

cardreader_phoenix:            yes
cardreader_internal_azbox:     no
cardreader_internal_coolapi:   no
cardreader_internal_sci:       yes
cardreader_sc8in1:             yes
cardreader_mp35:               yes
cardreader_smargo:             yes
cardreader_pcsc:               no
cardreader_smartreader:        yes
cardreader_db2com:             yes
cardreader_stapi:              no

Edited by honda-civic, 3 September 2013 - 09:45.

[VuSolo2User]

Hi,

 

Installing the new OpenPLI 4 everything went fine. However using the Dreamboxedit, that software seem to have a problem. Do you know the solution to this?

It says Neither a "services" nor a "lamedb" file was found in directory "%" on the Dreambox. /etc/enigma2/
Check the dream path settings on the option panel to point to the correct Dreambox directories and try again.
Disconnecting.

 

However looking through FTP these setting seem to be correct. Anyone a solution? Maybe it is a setting in OpenPLI 4?

 

thanks

[Frogman]

Do you use the new Dreamboxedit 5.3.0.0? I have no problems with this version.

[ims]

Perhaps a parallel build issue?
Does it occur again when you restart the build?

No, it seems, it is always, when is dm800se builded, then build for xp1000 finishing with this error.

[frankviana]

Reflash. That solves it.

FTP: OK now, but I have problem with other plugins: wget: server returned error.....

 

See:

 

 screenshot.jpg   96.82KB   58 downloads

 

Frank

==================

[frankviana]

This only happens with some plugins (missing: cccam info, device manager, multiquickbutton, etc), but I have others when installing by autobackup.

 

I installed manually this plugin and work: enigma2-plugin-extensions-multiquickbutton-plus-tv_2.7_mipsel.ipk

 

Frank

==========

[adri]

 

 

I suggest it is better to make a fix in opkg then inducing a work-a-round...

 

and as far I remember this was done once by pieterg... but it seems this issue came back somehow...

 

I fixed some opkg performance issues back then, but I could not debug the picon update, because we did not have a reproducable update producure at the time.
If we have now, I'd be happy to put a bit more time in.

 

http://sourceforge.n...c917b27b05af96/

picon updates should be a lot faster now

Pieter,

 

If picons (ocram-hd-reflection-black package) are installed on /media/cf instead of flash, should they update automatically, when a new version is available?

My experience is the picons are not updated when I do a software update.

I need to manually check for a new version, deinstall the old version and reinstall the new version.

 

Adri.