Jump to content


Photo

TBS 5925


  • Please log in to reply
340 replies to this topic

Re: TBS 5925 #161 Alex_NL

  • Senior Member
  • 2,056 posts

+11
Neutral

Posted 25 April 2016 - 22:33

I installed the SatDreamGR Experimental image from 15-4-2016 and now everything seems to work.


Edited by Alex_NL, 25 April 2016 - 22:34.

Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.


Re: TBS 5925 #162 Alex_NL

  • Senior Member
  • 2,056 posts

+11
Neutral

Posted 25 April 2016 - 23:00

Typical: With the SatDreamGR Experimental image from 23-4-2016 hbbTV worked (at least on NPO).

Now (with the image from 15-4-2016) no hbbTV anymore (like the last image from PLi).


Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.


Re: TBS 5925 #163 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 26 April 2016 - 06:08

Did your TBS card recognized and worked?

OpenPLi sources used with extra patches, like MIS/PLS, ATSC etc.

Anyway et10000 with TBS drivers exist on OpenPLi.

If you don't care for experimental changes stick to OpenPLi.

The other issues, like hbbtv will be solved at some point on OpenPLi.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #164 Alex_NL

  • Senior Member
  • 2,056 posts

+11
Neutral

Posted 28 April 2016 - 23:54

With SatDreamGR now installed I can scan the MIS/PLS transponders, f.e. on 4.8E, 5W, 12.5W etc.

 

I hope OpenPLi will implement the support soon, so I can switch back.


Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.


Re: TBS 5925 #165 stpierre

  • Member
  • 19 posts

+2
Neutral

Posted 29 April 2016 - 15:19

With SatDreamGR now installed I can scan the MIS/PLS transponders, f.e. on 4.8E, 5W, 12.5W etc.

 

I hope OpenPLi will implement the support soon, so I can switch back.

Try with "Experimental SatDreamGr Images"


TV = Solo4K 2xDVB-S2 (FBC) + 2xDVB-T2 + TBS5925
Tuner A = Multisat Indoor Home Made 10 LNB 52°e > 5°w-Tuner B = Fibo 90cm USALS = 68°e > 45°w


Re: TBS 5925 #166 jpuigs

  • Senior Member
  • 1,143 posts

+32
Good

Posted 1 May 2016 - 23:38

Is TBS 5990 (USB 2.0 Dual DVB-S2 Tuner)  supported ?


Enigma is getting old....

 

Spoiler

Re: TBS 5925 #167 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 2 May 2016 - 05:56

Not with the current patch. Ask for new patch from TBS support.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #168 jpuigs

  • Senior Member
  • 1,143 posts

+32
Good

Posted 2 May 2016 - 13:30

Ok, but I don't need it. It was just to kill my curiosity, a friend of mine asked me, and that's why I asked you.....

Thanks.


Enigma is getting old....

 

Spoiler

Re: TBS 5925 #169 MCelliotG

  • Senior Member
  • 443 posts

+35
Good

Posted 2 May 2016 - 18:54

New HQ video showcasing the usage, scanning and zapping normal and MIS channels on 5W, always using SDG image (with custom skin)!

As you can see everything runs smoothly and fast (at least up to kernel 4.3) and it's so worth a try for developers to make plugins for multistream usage!

 

Please note that the latest version of Dreamboxedit can backup and restore the MIS data with no problem. In this example I use a custom satellites.xml with PLS modes and codes inside and it works flawlessly.


Edited by glamourservices, 2 May 2016 - 18:56.


Re: TBS 5925 #170 Robinson

  • Senior Member
  • 2,621 posts

+30
Good

Posted 2 May 2016 - 20:19

Please note that the latest version of Dreamboxedit can backup and restore the MIS data with no problem.

 

What is this latest version, please?


ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W


Re: TBS 5925 #171 antonio215

  • Senior Member
  • 41 posts

0
Neutral

Posted 4 May 2016 - 20:24

New HQ video showcasing the usage, scanning and zapping normal and MIS channels on 5W, always using SDG image (with custom skin)!

As you can see everything runs smoothly and fast (at least up to kernel 4.3) and it's so worth a try for developers to make plugins for multistream usage!

 

Please note that the latest version of Dreamboxedit can backup and restore the MIS data with no problem. In this example I use a custom satellites.xml with PLS modes and codes inside and it works flawlessly.

 

Which uses decoder?



Re: TBS 5925 #172 Alex_NL

  • Senior Member
  • 2,056 posts

+11
Neutral

Posted 5 May 2016 - 17:28

 

With SatDreamGR now installed I can scan the MIS/PLS transponders, f.e. on 4.8E, 5W, 12.5W etc.

 

I hope OpenPLi will implement the support soon, so I can switch back.

Try with "Experimental SatDreamGr Images"

 

 

I always get burned here for not reading everything, I guess you can't read either. Some posts earlier I allready told I used the Experimental SatDreamGr image but I had to use one previous version.


Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.


Re: TBS 5925 #173 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 8 May 2016 - 19:59

/////////////////////////////////


 
Regarding the T2-MI, there is a project called Astra SM and it has already support decapsulating T2-MI, I wasn't able to decapsulate T2-MI from TS dump, maybe someone else has the time to make it.
 
https://gitlab.com/berdyansk/astra-sm
https://gitlab.com/b...c/mpegts/t2mi.c


 
/////////////////////////////////


The Astra-SM project mentioned above works. It is capable to decapsulating T2-MI and already exists on SatDreamGr feeds.

T2-MI Zeobud on 4.9E

ctb.jpg

nobkanal.jpg

Configuration.

Save in a file, make executable and run it.

(make sure you are using correct values in dvb_tune, eg correct diseqc)

#!/usr/bin/astra

log.set({ stdout = true, debug = true,})

adapter_1 = dvb_tune({
        adapter = "1",
        device = "0",
        type = "S2",
        tp = "12188:H:30000",
        lnb = "9750:10600:11700",
        modulation="PSK8",
        stream_id="20",
        t2mi = true,
        t2mi_pid=4096,
        t2mi_plp=0,
        fec = "AUTO",
        diseqc = "4",
        lnb_sharing = false,
        budget = false,
        rolloff = "AUTO",
})

make_channel({
        name = "ZEONBUD 21",
        input = { "dvb://adapter_1#pnr=21", },
        output = { "http://127.0.0.1:9999/zeonbud/21", },
})
make_channel({
        name = "ZEONBUD 22",
        input = { "dvb://adapter_1#pnr=22", },
        output = { "http://127.0.0.1:9999/zeonbud/22", },
})
make_channel({
        name = "ZEONBUD 23",
        input = { "dvb://adapter_1#pnr=23", },
        output = { "http://127.0.0.1:9999/zeonbud/23", },
})
make_channel({
        name = "ZEONBUD 24",
        input = { "dvb://adapter_1#pnr=24", },
        output = { "http://127.0.0.1:9999/zeonbud/24", },
})
make_channel({
        name = "ZEONBUD 25",
        input = { "dvb://adapter_1#pnr=25", },
        output = { "http://127.0.0.1:9999/zeonbud/25", },
})
make_channel({
        name = "ZEONBUD 26",
        input = { "dvb://adapter_1#pnr=26", },
        output = { "http://127.0.0.1:9999/zeonbud/26", },
})
make_channel({
        name = "ZEONBUD 27",
        input = { "dvb://adapter_1#pnr=27", },
        output = { "http://127.0.0.1:9999/zeonbud/27", },
})
make_channel({
        name = "ZEONBUD 28",
        input = { "dvb://adapter_1#pnr=28", },
        output = { "http://127.0.0.1:9999/zeonbud/28", },
})
Channels in Bouquet

#NAME ZeonBud
#SERVICE 1:0:1:0:0:0:0:0:0:0:http://127.0.0.1:9999/zeonbud/21 ZOOM
#SERVICE 1:0:1:0:0:0:0:0:0:0:http://127.0.0.1:9999/zeonbud/22 Кіноточка
#SERVICE 1:0:1:0:0:0:0:0:0:0:http://127.0.0.1:9999/zeonbud/23 СТБ
#SERVICE 1:0:1:0:0:0:0:0:0:0:http://127.0.0.1:9999/zeonbud/24 ТЕТ
#SERVICE 1:0:1:0:0:0:0:0:0:0:http://127.0.0.1:9999/zeonbud/25 К-2
#SERVICE 1:0:1:0:0:0:0:0:0:0:http://127.0.0.1:9999/zeonbud/26 Новий канал
#SERVICE 1:0:1:0:0:0:0:0:0:0:http://127.0.0.1:9999/zeonbud/27 М-1
#SERVICE 1:0:1:0:0:0:0:0:0:0:http://127.0.0.1:9999/zeonbud/28 5 канал

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #174 MCelliotG

  • Senior Member
  • 443 posts

+35
Good

Posted 9 May 2016 - 21:05

So, has anyone managed to make this work? I can't make it work for what I've tried!



Re: TBS 5925 #175 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 16 May 2016 - 10:47

Yes, patches required for every kernel.

Till now TBS products are supported only using v4l build that is not up to date...

For 4.3/4.5 kernel I had to make few changes:
 

    TBS: fixes for 4.3 kernel

    Change fe_sec_voltage_t to enum fe_sec_voltage.

    Remove TBS5921 because it uses tda10071_config that is unavailable.
    Driver should use I2C platform data now in order to load tda10071.
    More info: https://patchwork.linuxtv.org/patch/30472/
diff --git a/drivers/media/usb/dvb-usb/tbs-usb.c b/drivers/media/usb/dvb-usb/tbs-usb.c
index f142be3..98347c9 100644
--- a/drivers/media/usb/dvb-usb/tbs-usb.c
+++ b/drivers/media/usb/dvb-usb/tbs-usb.c
@@ -339,7 +339,7 @@ static int tbsusb_set_pin(struct dvb_frontend *fe, u8 *what)
 }

 static int tbsusb_set_voltage(struct dvb_frontend *fe,
-                                               fe_sec_voltage_t voltage)
+                                               enum fe_sec_voltage voltage)
 {
        static u8 command_13v[2] = {0x03, 0x00};
        static u8 command_18v[2] = {0x03, 0x01};
@@ -787,17 +787,6 @@ static const struct stv090x_config stv0900_config = {
        .set_lock_led           = tbsusb_led_ctrl,
 };

-static const struct tda10071_config tda10071_config = {
-       .demod_i2c_addr = 0x55, /* (0xaa >> 1) */
-       .tuner_i2c_addr = 0x14,
-       .i2c_wr_max     = 64,
-       .ts_mode        = TDA10071_TS_PARALLEL,
-       .spec_inv       = 0,
-       .xtal           = 40444000, /* 40.444 MHz */
-       .pll_multiplier = 20,
-       .set_lock_led   = tbsusb_led_ctrl,
-};
-
 static const struct cx24116_config cx24116_config = {
        .demod_address   = 0x55,
        .mpg_clk_pos_pol = 0x01,
@@ -840,9 +829,6 @@ static int tbsusb_frontend_attach(struct dvb_usb_adapter *d)
                d->fe_adap[0].fe = dvb_attach(stv0288_attach, &stv0288_config,
                                &d->dev->i2c_adap);
                break;
-       case USB_PID_TENOW_TBS5921:
-               d->fe_adap[0].fe = dvb_attach(tda10071_attach, &tda10071_config,
-                               &d->dev->i2c_adap);
        }

        if (!d->fe_adap[0].fe)
--
2.1.4

 

Do you have a complete patch set for 4.3 or 4.5? I tried to adapt for 4.4.8, but had several problems as some functions mentioned in the patch are not present any longer.


Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: TBS 5925 #176 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 16 May 2016 - 15:45

Hi,

Please find a complete set of patches for 4.3.

Only trivial changes required for 4.5 (usb_ids.h).

Attached Files


Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: TBS 5925 #177 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 16 May 2016 - 17:02

Patch applies on 4.4.8 kernel without problems. Thank you!


Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: TBS 5925 #178 antonio215

  • Senior Member
  • 41 posts

0
Neutral

Posted 24 May 2016 - 23:02

Patch applies on 4.4.8 kernel without problems. Thank you!

Hello . do I know which folder to be put pa Pacht ?
installing a new image with kernel 4
thank you



Re: TBS 5925 #179 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 25 May 2016 - 00:42

For Xtrend boxes (et10k, et8k, et8500 and et7x00) patch is already applied. Download drivers from feed.
For other boxes you need to build your own image. You cannot put the patch on the box. That's won't work so easy.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: TBS 5925 #180 Robinson

  • Senior Member
  • 2,621 posts

+30
Good

Posted 25 May 2016 - 11:10

Not for ET9000?


ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W



2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users