This is true?
for Dream it is a real licence problem. For transportation Dolby Digital Plus Streams over DVI you need HDCP Version 1.3. Dreambox DM8000 use DVI without Content Protection HDCP. So you will not get a licence from Dolby.
Dd+
Started by antrabe, 13 Sep 2013 21:06
176 replies to this topic
Re: Dd+ #42
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 1 October 2013 - 14:41
What about downmixing then...
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Dd+ #43
-
- Senior Member
- 121 posts
+7
Neutral
Posted 2 October 2013 - 16:36
I have the following issue using latest OpenPli 4.0 on et9000 regarding AC3+ audio...
If i use the optical out, there is sound on AC3+ channels, but using direct HDMI connection to home cinema or TV there isn't. At the same time, AC3 and DTS is going well through the HDMI. The problem is only the AC3+ audio. Is this implemented into the et9000 drivers or not (to go through the HDMI)? Thanks in advance!
VU+ Ultimo 4K; Clarke-Tech et9000
Re: Dd+ #44
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 2 October 2013 - 16:52
are you using the downmix setting?
When downmix is enabled, both spdif and hdmi should output stereo pcm.
When downmix is disabled, spdif should output ac3+ downmixed to ac3 (ac3+ bitrate is too high for spdif), and hdmi should output ac3+.
Perhaps if the other end (tv or av receiver) does not support hdmi 1.3, ac3+ might not work because of the limited bitrate (I'm not sure what would happen in that case).
When downmix is enabled, both spdif and hdmi should output stereo pcm.
When downmix is disabled, spdif should output ac3+ downmixed to ac3 (ac3+ bitrate is too high for spdif), and hdmi should output ac3+.
Perhaps if the other end (tv or av receiver) does not support hdmi 1.3, ac3+ might not work because of the limited bitrate (I'm not sure what would happen in that case).
Re: Dd+ #45
-
- Senior Member
- 121 posts
+7
Neutral
Posted 2 October 2013 - 18:00
No, i'm not using the downmix settings. If i use it, there is no problem, AC3+ sound is going through HDMI, downmixed to stereo. If downmix is switched off, then there is no sound via HDMI, but via spdif is OK, on home cinema. I'm using HDMI 1.3 cable and the TV is Samsung F7000 series with 3d blueray homecinema. Both of them support HDMI 1.3.
It would be nice if somebody else can test this with et9000 on other homecinema. For example on C+ Action HD on Astra 19E.
VU+ Ultimo 4K; Clarke-Tech et9000
Re: Dd+ #46
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 2 October 2013 - 18:27
That channel is scrambled, and I don't have a subscription.
I do have an old france 2 hd recording with ac3+ though, when I play that my av receiver (connected via hdmi) shows 'dolby digital plus', so I guess it is working.
I do have an old france 2 hd recording with ac3+ though, when I play that my av receiver (connected via hdmi) shows 'dolby digital plus', so I guess it is working.
Re: Dd+ #47
-
- PLi® Contributor
- 6,182 posts
+261
Excellent
Posted 2 October 2013 - 18:29
Hi,
I have no problem with AC3+ channels (french one on Eutelsat 5A 5.0W) with an ET-9000 connected with HDMI to my Onkyo amplifier.
The only thing is that there is a delay when I switch to such channel, first I have image with no sound then a few seconds later the sound is working, look like it needs time to sync audio and video.
Check that the HDMI cable that you use is foreseen for HDMI 1.3
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Dd+ #48
-
- Senior Member
- 121 posts
+7
Neutral
Posted 2 October 2013 - 19:17
Hello Pr2 and thanks for your reply!
Is there any free channel on Eutelsat 5W on which we can test the audio with Pieterg? Which Pli version and from when do you use?
VU+ Ultimo 4K; Clarke-Tech et9000
Re: Dd+ #49
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 2 October 2013 - 19:28
There are new drivers out, since yesterday, maybe there are fixing above issues.
dreambox-dvb-modules: update hw drivers for dm500hd, dm800se, dm7020hd, dm500hdv2, dm800sev2
- reverted to old audio core because of audio lost during skip fwd/bwd with some AVRs
- fixed broken transition between different audio types with enabled passthrough
Edited by athoik, 2 October 2013 - 19:28.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Dd+ #50
-
- Senior Member
- 158 posts
0
Neutral
Posted 2 October 2013 - 21:35
I have update my 500hd today but no change with ac3+ no sound on the french HD channel from 5.0W, I use scart cable for image and sound , is this normal?
Re: Dd+ #51
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 2 October 2013 - 22:47
Does that mean AC3+ is dropped again?dreambox-dvb-modules: update hw drivers for dm500hd, dm800se, dm7020hd, dm500hdv2, dm800sev2
- reverted to old audio core
Re: Dd+ #52
-
- Member
- 13 posts
0
Neutral
Posted 3 October 2013 - 07:44
i have flashed the Openpli from today and DD+ on C+ACCION HD doesn´t work !
On the new newenigma Image DD+ works fine !
Edited by mogli1724, 3 October 2013 - 07:45.
Re: Dd+ #53
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 3 October 2013 - 08:42
The latest drivers (from yesterday) are not yet in OpenPLi (see commit log).
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Dd+ #54
-
- Senior Member
- 44 posts
0
Neutral
Posted 3 October 2013 - 11:23
No, that isn't normal..you must use hdmiI have update my 500hd today but no change with ac3+ no sound on the french HD channel from 5.0W, I use scart cable for image and sound , is this normal?
Re: Dd+ #55
-
- Member
- 13 posts
0
Neutral
Posted 3 October 2013 - 13:32
The latest drivers (from yesterday) are not yet in OpenPLi (see commit log).
But in Newnigma the driver ist from 30.09 !
Re: Dd+ #56
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 3 October 2013 - 14:00
Then they either didn't include the previous update or they already have the lateste update.
Either way, simply wait until we've updated the drivers to today's state.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Dd+ #57
-
- PLi® Contributor
- 6,182 posts
+261
Excellent
Posted 3 October 2013 - 14:46
Hi,
To test AC3+ go to Astra 19.2E 11302 H 22000 2/3 8PSK
Check for ServusTV HD Deutschland
Press the yellow button and select audio track 4: AC3+
I have no sound on it on the Vu+ Duo².
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Dd+ #58
-
- Senior Member
- 1,667 posts
+59
Good
Posted 3 October 2013 - 17:14
I confirm.
Servus HD, AC3+ no sound.
Grtz Philip
Servus HD, AC3+ no sound.
Grtz Philip
vuduo2 openpli6.1 1TB HDD 2xdualS2tuner
av receiver denon - samsung 4k hdr+ 65inch UE65MU7000 - bose accoustimas 7.1 
tvv kaart & schotel(64cm), duo lnb, OSCAM
logitech harmony ultimate
Re: Dd+ #59
-
- Senior Member
- 437 posts
+23
Neutral
Posted 3 October 2013 - 22:00
On VuDuo with OpenPli 3.0 updated on 29-09-2013: perfect sound on Servus HD Deutschland, AC3 and AC3+, downmix on and off.
Re: Dd+ #60
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 4 October 2013 - 00:09
On VuDuo with OpenPli 3.0 updated on 29-09-2013: perfect sound on Servus HD Deutschland, AC3 and AC3+, downmix on and off.
Same here on Ultimo.
But on SOLO2 & DUO2 the AC3+ track is silent ......
5 user(s) are reading this topic
0 members, 5 guests, 0 anonymous users
