Jump to content


Photo

[help] Autoinstall problem

dm800se autoinstall

  • Please log in to reply
23 replies to this topic

#1 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 15:07

I have a problem using autoinstall (OpenPLi-4.0-beta-dm800se-20131202.nfi). Every time I installed a fresh image, the autoinstall worked, but have tried restoring several times now and does not install my plugins today.

 

This is my autoinstall file (autoinstall0009342a9996)

 

enigma2-meta
enigma2-plugin-drivers-usbserial
enigma2-plugin-extensions-advancedstartuptostandby
enigma2-plugin-extensions-dyndns
enigma2-plugin-extensions-epgsearch
enigma2-plugin-extensions-moviesearch
enigma2-plugin-extensions-multiquickbutton
enigma2-plugin-extensions-permanentclock
enigma2-plugin-extensions-transmission
enigma2-plugin-extensions-xmltvimport
enigma2-plugin-extensions-xmltvimport-rytec
enigma2-plugin-softcams-cccam
enigma2-plugin-systemplugins-automaticcleanup
enigma2-plugins-meta
enigma2-skins-meta
kernel-module-belkin-sa
kernel-module-ftdi-sio
kernel-module-fuse
kernel-module-keyspan
kernel-module-pl2303
kernel-module-usbserial
libcrypto0.9.8
libcurl4
libevent
libssl0.9.8
ntfsprogs

 

I have all settings (ip config, channel lists, etc), but the problem when restoring plugins only. Last auto backup: 01/12/2013, 02:00am. Autobackup and autoinstall enabled.

 

Sorry my english.

 

Frank

=================

 


Edited by frankviana, 2 December 2013 - 15:08.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #2 dirocca

  • Senior Member
  • 1,667 posts

+59
Good

Posted 2 December 2013 - 15:11

maybe you have a internet connection problem.

 

grtz Philip


vuduo2 openpli6.1 1TB HDD 2xdualS2tuner

av receiver denon - samsung 4k hdr+ 65inch UE65MU7000 - bose accoustimas 7.1 :rolleyes:

tvv kaart & schotel(64cm), duo lnb, OSCAM

logitech harmony ultimate

 

 

 


Re: [help] Autoinstall problem #3 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 15:16

No. When restore, I see all plugins again to download and connection OK with all my channel lists, but plugin list empty (only defaults appear)


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #4 dirocca

  • Senior Member
  • 1,667 posts

+59
Good

Posted 2 December 2013 - 15:26

make note that autoinstall only works for plugins you previously installed from the feed.

 

grtz Philip


vuduo2 openpli6.1 1TB HDD 2xdualS2tuner

av receiver denon - samsung 4k hdr+ 65inch UE65MU7000 - bose accoustimas 7.1 :rolleyes:

tvv kaart & schotel(64cm), duo lnb, OSCAM

logitech harmony ultimate

 

 

 


Re: [help] Autoinstall problem #5 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 15:27

See my configuration:

 

Attached File  1_0_19_228_3B_1_B542DDC_0_0_0.jpg   61.47KB   61 downloads

 

Attached File  1_0_19_228_3B_1_B542DDC_0_0_1.jpg   65.39KB   67 downloads

 

Attached File  Sem título.png   131.16KB   44 downloads

 

and this configuration (enigma2/settings):

 

config.plugins.autobackup.wakeup=2:0
config.plugins.autobackup.enabled=true
config.plugins.autobackup.autoinstall=true

 

Frank

=======================


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #6 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 15:30

make note that autoinstall only works for plugins you previously installed from the feed.

 

grtz Philip

 

Yes... I installed several times openpli 3.0 and 4.0 and autoinstall works restoring all my plugins listed (above).

 

Frank

==============


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #7 Meega

  • Senior Member
  • 3,000 posts

+51
Good

Posted 2 December 2013 - 15:57

Can you telnet to your box and check if the plugins will install by typing

 

init 4

 

/etc/init.d/autoinstall.sh

 

init 3


ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.

Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release


Re: [help] Autoinstall problem #8 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 16:29

Using this command line I have:

 

Attached File  Sem título2.png   134KB   33 downloads

 

Then I have enigma2 restarting, but no plugins installed.

 

Frank

================


Edited by frankviana, 2 December 2013 - 16:31.

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #9 Meega

  • Senior Member
  • 3,000 posts

+51
Good

Posted 2 December 2013 - 16:42

I think your /hdd/backup/autoinstall file is empty.

 

Can you check it?


ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.

Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release


Re: [help] Autoinstall problem #10 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 19:22

When I do a manual backup, I see only 1 (one) line (autoinstall0009342a9996): enigma2-skin-hdglass16,

 

but I have this plugins installed:

 

Attached File  Sem título3.png   140.15KB   18 downloads

 

enigma2-meta
enigma2-plugin-drivers-usbserial
enigma2-plugin-extensions-advancedstartuptostandby
enigma2-plugin-extensions-dyndns
enigma2-plugin-extensions-epgsearch
enigma2-plugin-extensions-moviesearch
enigma2-plugin-extensions-multiquickbutton
enigma2-plugin-extensions-permanentclock
enigma2-plugin-extensions-transmission
enigma2-plugin-extensions-xmltvimport
enigma2-plugin-extensions-xmltvimport-rytec
enigma2-plugin-softcams-cccam
enigma2-plugin-systemplugins-automaticcleanup
enigma2-plugins-meta
enigma2-skins-meta
kernel-module-belkin-sa
kernel-module-ftdi-sio
kernel-module-fuse
kernel-module-keyspan
kernel-module-pl2303
kernel-module-usbserial
libcrypto0.9.8
libcurl4
libevent
libssl0.9.8
ntfsprog

 

I changed to stick usb to see (maybe the problem is my hdd),but same problem: grabbing only 1 line.

 

I did this before:

 

Attached File  Sem título3.png   140.15KB   18 downloads

 

Frank

==================

 

 

 

Attached Files


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #11 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 19:23

If I put all the lines too, don't install. I don't know why.

 

Frank

===========


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #12 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 19:28

I'll test again, copy/paste/save all my lines and install a fresh image to see, because if I do a manual backup (autoinstall), I see only 1 line and will report here.


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #13 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 19:43

Same problem: autoinstall don't work when install a fresh image. I see all my lines before install.

 

Now, only work if I do a manual command line (I see all the lines there)

 

init 4

/etc/init.d/autoinstall.sh

init 3

 

Frank

============


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #14 Meega

  • Senior Member
  • 3,000 posts

+51
Good

Posted 2 December 2013 - 19:55

Take a look at /etc/installed and find if your plugins are in there.

 

Delete the lines of your manual installed plugins like "enigma2-plugin-extensions-multiquickbutton"  in installed , and create a new backup.

 

Maybe this is the cause.

 

Also look in your backup menu if you checked /etc as backup. ,ifso don't backup complete /etc.


Edited by Meega, 2 December 2013 - 19:57.

ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.

Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release


Re: [help] Autoinstall problem #15 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 20:26

Take a look at /etc/installed and find if your plugins are in there.

 

Delete the lines of your manual installed plugins like "enigma2-plugin-extensions-multiquickbutton"  in installed , and create a new backup.

 

Maybe this is the cause.

 

Also look in your backup menu if you checked /etc as backup. ,ifso don't backup complete /etc.

 

If I delete all lines and do a manual (new backup), appear only "enigma2-skin-hdglass16", but I have all plugins installed.


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #16 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 20:28

The problem is only with plugins. I have all my settings when restore (channel lists, cccam, user data)


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: [help] Autoinstall problem #17 Meega

  • Senior Member
  • 3,000 posts

+51
Good

Posted 2 December 2013 - 20:31

Yes but are your own plugins in the installed file in /etc?


ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.

Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release


Re: [help] Autoinstall problem #18 Meega

  • Senior Member
  • 3,000 posts

+51
Good

Posted 2 December 2013 - 20:36

Oke in my case they are and that's not good.

 

So the autobackup plugin needs some investigation.

 

Maybe a dev can take a look??(Mirakels)


Edited by Meega, 2 December 2013 - 20:38.

ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.

Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release


Re: [help] Autoinstall problem #19 Meega

  • Senior Member
  • 3,000 posts

+51
Good

Posted 2 December 2013 - 20:45

It apear to be that the installed file is created everytime you make a backup.

I thought it was created once.

 

So when the autoinstall file in backup is not present or the backup is deleted ,the installed file will be created with all plugins in it.

 

I think thats not good and i think the installed file should be created once.

I thought that that was history, but it's not.


ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.

Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release


Re: [help] Autoinstall problem #20 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 2 December 2013 - 21:32

It apear to be that the installed file is created everytime you make a backup.

I thought it was created once.

 

So when the autoinstall file in backup is not present or the backup is deleted ,the installed file will be created with all plugins in it.

 

I think thats not good and i think the installed file should be created once.

I thought that that was history, but it's not.

I have used many times autoinstall and noticed this error with this image. The problem appear in the creation of backup and restore, even though the full list. If I delete the folder "/media/hdd/backup", and do a manual backup (new backup) new folder appear with autoinstall, but with only 1 line (hd glass) even though I have all the plugins installed.

 

If I copy/paste all the lines and install fresh image, don't restore my plugins, but if I use init 4, /etc/autoinstall.sh init3, I have all installed again.

 

Frank

===============


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)




Also tagged with one or more of these keywords: dm800se, autoinstall

2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users