Posted 5 August 2014 - 11:35
How to get ecm info like this.
I tried openpli skins but could not get ecm info like this.
only gp3 plugin has ecm info like this.
I don't have this skin.
What is the name of this skin? or Does anyone know how can I display ecm like this on PLi-Hd skin?
How do I get ecm window like this on openPLi?
Thanks
Posted 5 August 2014 - 12:21
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 5 August 2014 - 12:58
can we port this to enigma2?
Is it a plugin or skin scripting that shows ecm window on osd like this?
Posted 5 August 2014 - 13:13
Do you have activated the second info bar in your OpenPli 4 and press two times OK button and watch the upper left corner?
You can also go in the softcam manager page and see the same info (I think that now it is also refreshed).
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 5 August 2014 - 14:17
Edited by littlesat, 5 August 2014 - 14:17.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 5 August 2014 - 14:20
Do you have activated the second info bar in your OpenPli 4 and press two times OK button and watch the upper left corner?
You can also go in the softcam manager page and see the same info (I think that now it is also refreshed).
ecm window does not appear on press two times OK button. It displays the usual pli-hd on ecm infobar.
I need Ecm window like above. Ecm window like in gp3 plugin if you have used on original dreambox firmware.
softcam manager also shows ecm info but you have to go to softcam panel first.
Posted 5 August 2014 - 14:21
Via blue softcam manager you also get some of this info.... The ecm info is not included there (yet). But your skin needs to supported the widgets...
If you could quote some skins that support widgets and display ecm window like above mentioned?
Posted 5 August 2014 - 14:45
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 6 August 2014 - 10:49
Our standard skins???
PLi-HD is default.
How would I get ecm window ?
Any code or some script plugin?
Posted 6 August 2014 - 13:05
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 6 August 2014 - 13:09
use my plugin
https://drive.google...dit?usp=sharing
and necessarily need to install
binary for bitrate openpli 3.x
https://drive.google...dit?usp=sharing
binary for bitrate openpli 4.x
https://drive.google...dit?usp=sharing
Posted 6 August 2014 - 15:20
Why do you reaaly want this info on the normal zap functionality..... ?
I assume it has to do with illegal activities... 
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 August 2014 - 10:35
@2boom
Thanks a lot bro.
Was waiting for ecm info like that on OpenPLi.
Simple and Detailed.
Can I use it on other dreambox images?
I've installed the "binary for bitrate openpli 3.x" on a dreambox image and green screen on reboot.
Could you give a dreambox compatible bitrate binary?
up.jpg 128.73KB
75 downloads
Posted 7 August 2014 - 13:21
ooks very nice.
Does it show ECM info for all CAID's present on a given channel?
For example, Sky Cinema from the first post seems to have 6 ECM CAID's. Does your plugin show them all, including 6 ECM PID's and 6 provider ID's or just information for the one actually used in descrambling?
Also, does it show the data if a channel cannot be descrambled by the user?
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 7 August 2014 - 17:49
Edited by zeros, 7 August 2014 - 17:54.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 7 August 2014 - 19:13
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 7 August 2014 - 20:19
Why do you reaaly want this info on the normal zap functionality..... ?
I assume it has to do with illegal activities...
You are assuming that !!
I just wanted a feature in openPLi that it didn't have [i don't know] and which is available in GP3 plugin.
And you know openPLi doesn't support GP3 plugin [also most dreambox plugins] or vice versa [GP3 doesn't support openPli image]
Edited by shani, 7 August 2014 - 20:19.
Posted 7 August 2014 - 20:45
Sherlock plugin can show you in TV screen the ECM time (configure Doctor Watson mode: ECM time, then when in channel you want, press the blue button and select 'Sherlock'.
can you provide a screenshot? I don't want to see that green screen
ooks very nice.
Does it show ECM info for all CAID's present on a given channel?
For example, Sky Cinema from the first post seems to have 6 ECM CAID's. Does your plugin show them all, including 6 ECM PID's and 6 provider ID's or just information for the one actually used in descrambling?
Also, does it show the data if a channel cannot be descrambled by the user?
Good point. I will look into that.
0 members, 7 guests, 0 anonymous users
