121 replies to this topic

[Pedro_Newbie]

I can't reproduce it, it all works fine on the Solo2 and ET8000

[jpuigs]

Flashed my ET8000 and no problems detected so far

 

I have GUI-updated my ET8000 and there were only 19 packages updated. I've tried again and says "no updates available".

How can I know if it has been correctly updated ?

Normally, every 4-5 days I update it and find from 20 to 30 upgrades.

Telnet command opkg list-upgradable shows nothing.

[delagroov]

 

Flashed and restored UNO and no issues observed.

Found one issue: when trying to de-install plugins (webbrowser --> red) I get a message 'no new plugins found'. Not sure if this is related to 'the big upgrade', but I didn't notice this issue before.

UNO-Pluginbrowser-red.jpg

 

 

Still works okay here on solo2

Edited by delagroov, 16 November 2014 - 11:52.

[littlesat]

Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-systemplugins-fastscan:
 *     font-valis-hd *
 * opkg_install_cmd: Cannot install package enigma2-plugin-systemplugins-fastscan.
 * opkg_install_pkg: Package enigma2-plugin-extensions-ppanel md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'.
 * opkg_install_cmd: Cannot install package enigma2-plugin-extensions-ppanel.

ERROR: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /home/fam/openpli-oe-core/build/tmp/work/et10000-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_rootfs.10934
ERROR: Task 7 (/home/fam/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb, do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3498 tasks of which 3435 didn't need to be rerun and 1 failed.
No currently running tasks (3498 of 3501)

Summary: 1 task failed:
  /home/fam/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb, do_rootfs
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [image] Fout 1
 

[MiLo]

If you build your own, it's strongly advised to clean out the "tmp" directory before building.

[ims]

about "Package enigma2-plugin-extensions-ppanel md5sum mismatch" ... i am using sucesfuly for it after build script with :

boxes="formuler1 dm800se xp1000 vuultimo"
for b in $boxes
    do
        rm ~/oe4_$b/build/tmp/deploy/ipk/mips32el/Packages.gz
        rm ~/oe4_$b/build/tmp/deploy/ipk/mips32el/Packages.stamps
        ~/oe4_$b/recreate_feed ~/oe4_$b/build/tmp/deploy/ipk/mips32el

        rm ~/oe4_$b/build/tmp/deploy/ipk/all/Packages.gz
        rm ~/oe4_$b/build/tmp/deploy/ipk/all/Packages.stamps
        ~/oe4_$b/recreate_feed ~/oe4_$b/build/tmp/deploy/ipk/all

        rm ~/oe4_$b/build/tmp/deploy/ipk/$b/Packages.gz
        rm ~/oe4_$b/build/tmp/deploy/ipk/$b/Packages.stamps
        ~/oe4_$b/recreate_feed ~/oe4_$b/build/tmp/deploy/ipk/$b
    done

 I do not know why, but file "Packages" is finished before ending whole building and are not complet. Then can be wrong md5 or missing whole info of most packages.

It must be made after removed "tmp" too.

 

this problem is cca 3month old...

Edited by ims, 16 November 2014 - 12:45.

[Pedro_Newbie]

 

Flashed my ET8000 and no problems detected so far

 

I have GUI-updated my ET8000 and there were only 19 packages updated. I've tried again and says "no updates available".

How can I know if it has been correctly updated ?

Normally, every 4-5 days I update it and find from 20 to 30 upgrades.

Telnet command opkg list-upgradable shows nothing.

 

To be absolute sure, just flash a new image and build your settings from scratch or let the autobackup/restore do its job.

It takes less then half a hour to get things up and running again. This ensures you you don't have any old remains from previous image(s)

[littlesat]

I did remove the compelte tmp tree..... ????

 

But I can still build a good enigma2 binary... so it is not a huge issue for me...

[kalehrl]

I get this error while upgrading:

Upgrading enigma2 from 2.7+git12198+1d2be8a-r49 to 2.7+git12208+1333a32-r49 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/et6x00/enigma2_2.7+git12208+1333a32-r49_et6x00.ipk.
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2:
 *     libgif4 (>= 4.1.6) *

I'm using xtrend et6000 and I ran the update twice but the error persists.

[hemertje]

see our advise to flash instead of upgrading!

[Rob van der Does]

Flashed and restored UNO and no issues observed.

Found one issue: when trying to de-install plugins (webbrowser --> red) I get a message 'no new plugins found'. Not sure if this is related to 'the big upgrade', but I didn't notice this issue before.

UNO-Pluginbrowser-red.jpg

I flashed again, this time without any restore. Just made the basic settings in the FIW and the same issue again.
So this is 100% reproducible, at least on the UNO.

[greatred]

@SatKiekerd

 

On my UNO fresh install, with settings restore and the issue described by you is not reproducible.

 

Overall I did not observe any problems after the installation, upgrade was of course failing upon not fulfilled enigma2 dependencies.

Edited by greatred, 16 November 2014 - 18:10.

[theparasol]

Yesterday I flashed the 15-11 image and today I did the upgrade to 16-11 but I'm running into following issue:

 

root@xp1000:~# opkg upgrade
Upgrading enigma2 from 2.7+git12208+1333a32-r49 to 2.7+git12209+6e4612f-r49 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2_2.7+git12209+6e4612f-r49_xp1000.ipk.
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2:
 *      libgif4 (>= 4.1.6) *
root@xp1000:~#

[MiLo]

What happens if you just do:

opkg install libgif4

[theparasol]

I already tried that, but it seems not present in the feeds if you ask me:

 

root@xp1000:~# opkg install libgif4
Unknown package 'libgif4'.
Collected errors:
 * opkg_install_cmd: Cannot install package libgif4.
root@xp1000:~#

[ims]

In my build it is presented , but I making always on end recreate_feed.

xp1000 login: root
root@xp1000:~# opkg list | grep libgif4
libgif4 - 4.1.6-r3 - shared library for GIF images
root@xp1000:~#

But somebody wants not accept, that long time are Packages wrongly created.

[kalehrl]

Could you attach the file for manual installation?

When I run:

opkg list | grep libgif4

The re is no output which means it is not installed.

[theparasol]

But somebody wants not accept, that long time are Packages wrongly created.

 

Well, perhaps things will change now there is proof that the feeds are incomplete.

[athoik]

In my build it is presented , but I making always on end recreate_feed.
...
But somebody wants not accept, that long time are Packages wrongly created.

If you are building only one image there will be no issues! If you are building more that one image then you are correct, packages are borked. Running recreate_feed against all and mips32el is the way to solve problems.

Also depends on dvb are borked, almost all new builds (or new kernels) have issues to caclulate the correct dvb depends. (The only way to solve this is to create packages for every dvb stick and use RRECOMENTS with all posible kernel modules)

[ims]

 

In my build it is presented , but I making always on end recreate_feed.
...
But somebody wants not accept, that long time are Packages wrongly created.

If you are building only one image there will be no issues! If you are building more that one image then you are correct, packages are borked. Running recreate_feed against all and mips32el is the way to solve problems.

Also depends on dvb are borked, almost all new builds (or new kernels) have issues to caclulate the correct dvb depends. (The only way to solve this is to create packages for every dvb stick and use RRECOMENTS with all posible kernel modules)

 

 

For your info - i am building each image for each box in standallone repo directory and I good know why ... and isue with wrong generating "Packages" I wroted in development yesterday ... without any reaction.