Jump to content


Photo

Astrometa DVB-T/T2/C MN88472/MN88473


  • Please log in to reply
106 replies to this topic

Re: Astrometa DVB-T/T2/C MN88472/MN88473 #41 gjstroom

  • Senior Member
  • 516 posts

+16
Neutral

Posted 28 December 2014 - 17:53

Thanks athoik, I will give it a try, I already had some suspicion about dvb-core being a fixed kernel component instead of a module.

I will also apply the other patches, I thought they were not necessary for this purpose.


Amiko8240, DM500HD, DM800, DM800SE, DM800SESR4, DM800SEV2, VU+ SoloSEV2, VU+ UnoSE


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #42 gjstroom

  • Senior Member
  • 516 posts

+16
Neutral

Posted 31 December 2014 - 18:29

Well I made a new kernel for the dm800se image with dvb-core as module, this works fine, but if I replace this module with my own build one from the media_build repository I get:

root@dm800sr4:~# dmesg |grep dvb
[   12.261000] bcm7405: Unknown symbol dvb_net_release (err 0)
[   12.261000] bcm7405: Unknown symbol dvb_net_init (err 0)

 

bcm7405 can't load.

root@dm800se:~# lsmod
Module                  Size  Used by
ipv6                  300339  20
r8712u                171958  0
dreambox_keyboard       3296  0
dreambox_rc2            5216  1 dreambox_keyboard
alps_bsbe1              5219  0
stv0299                 9272  1 alps_bsbe1
cxd1981                13910  0
dvb_core               72870  2 cxd1981,stv0299
helper                   540  0
bcm4506                91490  0
alps_bsbe1_c01a        17000  0
cu1216mk3               7610  0
tu1216                 40190  0
tmp100                   910  0
alps_bsbe2             42691  0
lnb_ctrl                5149  4 alps_bsbe2,alps_bsbe1_c01a,bcm4506,alps_bsbe1
snd_pcm                65045  0
snd_page_alloc          5661  1 snd_pcm
snd_timer              18906  1 snd_pcm
lcd                    43577  0
stb_core               16706  10 lcd,lnb_ctrl,alps_bsbe2,tmp100,cu1216mk3,alps_bsbe1_c01a,bcm4506,cxd1981,dreambox_rc2,dreambox_keyboard
fuse                   74039  0
 

Any suggestions ? I'm thinking DVB_NET also as module instead of static ?


Amiko8240, DM500HD, DM800, DM800SE, DM800SESR4, DM800SEV2, VU+ SoloSEV2, VU+ UnoSE


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #43 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 31 December 2014 - 18:41

do you have DVB_NET enabled in your media_build config?



Re: Astrometa DVB-T/T2/C MN88472/MN88473 #44 gjstroom

  • Senior Member
  • 516 posts

+16
Neutral

Posted 31 December 2014 - 20:07

CONFIG_DVB_CORE=m
# CONFIG_DVB_NET is not set
 

But DVB_CORE is present in the dm800se kernel:

CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
 

I'm not sure what DVB_NET does, do we need it in a DMM box ?


Edited by gjstroom, 31 December 2014 - 20:10.

Amiko8240, DM500HD, DM800, DM800SE, DM800SESR4, DM800SEV2, VU+ SoloSEV2, VU+ UnoSE


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #45 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 31 December 2014 - 21:03

If other boxes have this disabled we can try to disable that one too. But (there is always a but!) Last time we disabled something in DMM kernel (NFSD V4) drivers (the closed ones) stopped working.

Go ahead with your tests, I think you are just few steps away from success!

Edited by athoik, 31 December 2014 - 21:04.

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Astrometa DVB-T/T2/C MN88472/MN88473 #46 malakudi

  • Senior Member
  • 1,449 posts

+69
Good

Posted 1 January 2015 - 11:07

The kernel config is not used for your v4l compile. The v4l config is used. So, change your v4l config with: CONFIG_DVB_NET=y



Re: Astrometa DVB-T/T2/C MN88472/MN88473 #47 gjstroom

  • Senior Member
  • 516 posts

+16
Neutral

Posted 1 January 2015 - 18:29

CONFIG_DVB_NET=y did the trick, box now runs at dvc-core from the media_build git.

Only in tuner configuration is says: Alps BsBE2 (not supported).

All normal things are present:

ipv6                  300339  22
r8712u                171958  0
dreambox_keyboard       3296  0
dreambox_rc2            5216  1 dreambox_keyboard
bcm7405              3935135  4
alps_bsbe1              5219  1 bcm7405
stv0299                 9272  1 alps_bsbe1
cxd1981                13910  1 bcm7405
dvb_core               87287  5 cxd1981,stv0299,bcm7405,dvb_usb_v2,rtl2830
helper                   540  1 bcm7405
bcm4506                91490  1 bcm7405
alps_bsbe1_c01a        17000  1 bcm7405
cu1216mk3               7610  1 bcm7405
tu1216                 40190  1 bcm7405
tmp100                   910  1 bcm7405
alps_bsbe2             42691  1 bcm7405
lnb_ctrl                5149  4 alps_bsbe2,alps_bsbe1_c01a,bcm4506,alps_bsbe1
snd_pcm                65045  1 bcm7405
snd_page_alloc          5661  1 snd_pcm
snd_timer              18906  1 snd_pcm
lcd                    43577  1
stb_core               16706  11 lcd,lnb_ctrl,alps_bsbe2,tmp100,cu1216mk3,alps_bsbe1_c01a,bcm4506,cxd1981,bcm7405,dreambox_rc2,dreambox_keyboard
fuse                   74039  0

 

When I try to load the Astrometa drivers:

[ 1501.874000] dvb_usb_rtl28xxu: Unknown symbol rtl2832_get_private_i2c_adapter (err 0)
[ 1501.874000] dvb_usb_rtl28xxu: Unknown symbol rtl2832_get_i2c_adapter (err 0)
[ 1501.875000] dvb_usb_rtl28xxu: Unknown symbol rtl2832_enable_external_ts_if (err 0)
[ 1540.648000] rtl2832: Unknown symbol i2c_del_mux_adapter (err 0)
[ 1540.649000] rtl2832: Unknown symbol i2c_add_mux_adapter (err 0)

 

I think I miss some i2c part ?


Amiko8240, DM500HD, DM800, DM800SE, DM800SESR4, DM800SEV2, VU+ SoloSEV2, VU+ UnoSE


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #48 xhemp

  • Member
  • 1 posts

0
Neutral

Posted 1 February 2015 - 23:38

Did anyone have any luck with this? I've been trying to get it working with openvix on a Mutant2400 but I am getting some kernel errors (similar to the ones gjstroom is getting).

Any ideas would be appreciated.

Thanks!



Re: Astrometa DVB-T/T2/C MN88472/MN88473 #49 Alex_NL

  • Senior Member
  • 1,953 posts

+10
Neutral

Posted 4 February 2016 - 21:14

Sorry to react on a year old topic, I didn't know anyone was busy trying to build a driver for this device.
I'm afraid there's no news to this?

Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #50 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 4 February 2016 - 21:39

See: http://blog.palosaar...mdvb-t2-v2.html

Linux support was added to kernel 3.13, as support for old device version was added at that time.
Linux driver supports only DVB-T.
DVB-T2 and DVB-C are not supported as there is no driver for MN88473 demodulator which provides those DTV standards.


Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Astrometa DVB-T/T2/C MN88472/MN88473 #51 Alex_NL

  • Senior Member
  • 1,953 posts

+10
Neutral

Posted 4 February 2016 - 22:27

See: http://blog.palosaar...mdvb-t2-v2.html
 

Linux support was added to kernel 3.13, as support for old device version was added at that time.
Linux driver supports only DVB-T.
DVB-T2 and DVB-C are not supported as there is no driver for MN88473 demodulator which provides those DTV standards.

Thanks, my stick is this one: http://blog.palosaar...b-tv-stick.html

Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #52 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 4 February 2016 - 22:57

And you want to use as dvb-c/t2/t? For et10000 pluggable tuners is the best option.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Astrometa DVB-T/T2/C MN88472/MN88473 #53 Alex_NL

  • Senior Member
  • 1,953 posts

+10
Neutral

Posted 5 February 2016 - 00:09

I know, but they are allready in use and I just want to try it.
Also I would like to use it on a ET9500 but I'm affraid that will never work because of the kernell (3.8.7)

Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #54 ColinB

  • Senior Member
  • 743 posts

+28
Good

Posted 26 April 2016 - 11:10

Hi All,

 

I'm trying to this to scan DVB-T with no success. It works OK in Windows8. (Not tested DVB-C)

 

Attached File  dmesg01.txt   9.63KB   9 downloads

Attached File  lsmod01.txt   453bytes   5 downloads

 

et8000 shows this in the menu's

Attached File  About-01.jpg   62.56KB   6 downloads

Attached File  Input-01.jpg   54.97KB   3 downloads

 

I openned it up and can see the PANA  MN88473 chip

It has this case, but the printing reads: DVB-T/T2/C+FM+DAB

Attached File  My_USB_Tuner_Case.jpg   131.94KB   5 downloads

 

PS: I am quite blown away at the amount of work that goes on behind the scene to get thing like this to work.

 

Thanks Colin


Xtrend et8000 7.1-Release

2 x 8/1 DiSEqC  30w 13e 19e 23e 28e   

Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+  ;)

WD10EARX 1TB

Sandisk 32GB USB for AFB, EPG, Picons & Timeshift

 

ZGemma Star S 7.0-Release

4/1 DiSEqC  30w 13e 19e 28e

Sandisk 8GB USB for AFB, EPG, Picons & Timeshift

 

LG 49UH610V UHD-HDR

UHF/Cable/Sat

 

E-Channelizer

 

 

 


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #55 ColinB

  • Senior Member
  • 743 posts

+28
Good

Posted 26 April 2016 - 14:03

Not sure if this is of any help ?

 

Attached File  Nim-Sockets.txt   366bytes   9 downloads

 

NIM Socket 0:
    Type: DVB-S2
    Name: AVL6211
    Has_Outputs: yes
    Internally_Connectable: 0
    Frontend_Device: 0
    I2C_Device: 3
NIM Socket 1:
    Type: DVB-S2
    Name: AVL6211
    Has_Outputs: yes
    Internally_Connectable: 0
    Frontend_Device: 1
    I2C_Device: 4
NIM Socket 2:
    Type: DVB-T
    Name: dvbt2
    Has_Outputs: no
    Internally_Connectable: 0
    Frontend_Device: 2
    I2C_Device: -1
 


Edited by ColinB, 26 April 2016 - 14:04.

Xtrend et8000 7.1-Release

2 x 8/1 DiSEqC  30w 13e 19e 23e 28e   

Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+  ;)

WD10EARX 1TB

Sandisk 32GB USB for AFB, EPG, Picons & Timeshift

 

ZGemma Star S 7.0-Release

4/1 DiSEqC  30w 13e 19e 28e

Sandisk 8GB USB for AFB, EPG, Picons & Timeshift

 

LG 49UH610V UHD-HDR

UHF/Cable/Sat

 

E-Channelizer

 

 

 


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #56 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 26 April 2016 - 14:24

Can you post the output from the following command?

ls -la /dev/dvb/adapter*/*

Edited by athoik, 26 April 2016 - 14:26.

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Astrometa DVB-T/T2/C MN88472/MN88473 #57 ColinB

  • Senior Member
  • 743 posts

+28
Good

Posted 26 April 2016 - 15:09

Thanks for taking the time

 

Here you go

 

Attached File  Adapter-01.PNG   60.7KB   7 downloads


Xtrend et8000 7.1-Release

2 x 8/1 DiSEqC  30w 13e 19e 23e 28e   

Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+  ;)

WD10EARX 1TB

Sandisk 32GB USB for AFB, EPG, Picons & Timeshift

 

ZGemma Star S 7.0-Release

4/1 DiSEqC  30w 13e 19e 28e

Sandisk 8GB USB for AFB, EPG, Picons & Timeshift

 

LG 49UH610V UHD-HDR

UHF/Cable/Sat

 

E-Channelizer

 

 

 


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #58 ColinB

  • Senior Member
  • 743 posts

+28
Good

Posted 26 April 2016 - 15:22

Attached File  Adapter-02.PNG   40.55KB   4 downloads


Xtrend et8000 7.1-Release

2 x 8/1 DiSEqC  30w 13e 19e 23e 28e   

Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+  ;)

WD10EARX 1TB

Sandisk 32GB USB for AFB, EPG, Picons & Timeshift

 

ZGemma Star S 7.0-Release

4/1 DiSEqC  30w 13e 19e 28e

Sandisk 8GB USB for AFB, EPG, Picons & Timeshift

 

LG 49UH610V UHD-HDR

UHF/Cable/Sat

 

E-Channelizer

 

 

 


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #59 ColinB

  • Senior Member
  • 743 posts

+28
Good

Posted 26 April 2016 - 15:30

Attached File  Strange.PNG   8.82KB   4 downloads


Xtrend et8000 7.1-Release

2 x 8/1 DiSEqC  30w 13e 19e 23e 28e   

Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+  ;)

WD10EARX 1TB

Sandisk 32GB USB for AFB, EPG, Picons & Timeshift

 

ZGemma Star S 7.0-Release

4/1 DiSEqC  30w 13e 19e 28e

Sandisk 8GB USB for AFB, EPG, Picons & Timeshift

 

LG 49UH610V UHD-HDR

UHF/Cable/Sat

 

E-Channelizer

 

 

 


Re: Astrometa DVB-T/T2/C MN88472/MN88473 #60 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 26 April 2016 - 15:57

I edit the post, there is nothing strange.

I do not see the adapter1/frontend0 and adapter1/frontend1 created.

Although according to dmesg those files registered, without any notable error.

usb 2-1: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Astrometa DVB-T2)
i2c i2c-7: Added multiplexed i2c bus 8
rtl2832 7-0010: Realtek RTL2832 successfully attached
mn88473: module is from the staging directory, the quality is unknown, you have been warned.
mn88473 7-0018: Panasonic MN88473 successfully attached
>>>>>  usb 2-1: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...  <<<<<<<<
>>>>>  usb 2-1: DVB: registering adapter 1 frontend 1 (Panasonic MN88473)...  <<<<<<<<<
r820t 8-003a: creating new instance
r820t 8-003a: Rafael Micro r820t successfully identified
r820t 8-003a: attaching existing instance
r820t 8-003a: Rafael Micro r820t successfully identified
Registered IR keymap rc-empty
input: Astrometa DVB-T2 as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0/input3
rc0: Astrometa DVB-T2 as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0
usb 2-1: dvb_usb_v2: schedule remote query interval to 400 msecs
usb 2-1: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_rtl28xxu
So at the moment, the only strange is that adapter1 is missing!

Enigma2 ignores adapter1/frontend1, so you might have luck with the following:

init 4
mv /dev/dvb/adapter1/frontend0 /dev/dvb/adapter1/frontend2
mv /dev/dvb/adapter1/frontend1 /dev/dvb/adapter1/frontend0
init 3

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users