106 replies to this topic

[ColinB]

Output

 

 Adapter-03.PNG   12.85KB   4 downloads

Attached Files

•  dmesg-02.txt   9.5KB   0 downloads

[ColinB]

Seem I've lost the adapter

 

 dmesg-02.txt   9.5KB   13 downloads

[ColinB]

Restored from backup

 

This is dmesg when scanning;

 

 dmesg-03.PNG   63.85KB   4 downloads

 

 

I lets me scan but it cant find any services

Edited by ColinB, 26 April 2016 - 17:06.

[athoik]

And if you run the commands i point before, what happens?

[ColinB]

On scan completion:

 

 dmesg-04.PNG   87.66KB   2 downloads

 

cheers Colin

[ColinB]

And if you run the commands i point before, what happens?

Post 61

 

I happy to do again ?

[athoik]

If you havent run those, run then.

init 4
mv /dev/dvb/adapter1/frontend0 /dev/dvb/adapter1/frontend2
mv /dev/dvb/adapter1/frontend1 /dev/dvb/adapter1/frontend0
init 3

And see of that works.

[ColinB]

If you havent run those, run then.
 

init 4
mv /dev/dvb/adapter1/frontend0 /dev/dvb/adapter1/frontend2
mv /dev/dvb/adapter1/frontend1 /dev/dvb/adapter1/frontend0
init 3

And see of that works.

 

 

This is the output

 dmesg-05.PNG   49.27KB   21 downloads

[ColinB]

 

If you havent run those, run then.
 

init 4
mv /dev/dvb/adapter1/frontend0 /dev/dvb/adapter1/frontend2
mv /dev/dvb/adapter1/frontend1 /dev/dvb/adapter1/frontend0
init 3

And see of that works.

 

 

This is the output

dmesg-05.PNG

 

 

This is NEW

 

 Choose Tuner-01.jpg   60.74KB   3 downloads

[athoik]

You are missing the firmware..

[ColinB]

Box locked up after I tried changing Tuner from DVB-C to DVD-T.

 

 

 dmesg-06.PNG   360.07KB   5 downloads

 

reboot & e2 back working

 

 

 

 

 

 

 

 

[athoik]

Did you place the firmware in /lib/firmware ?

[ColinB]

You are missing the firmware..

 

I should have started by saying what I had installed. Sorry.

 

enigma2-plugin-drivers-dvb-usb-rtl2832 - 1.0-r0.5

kernel-module-mn88473 - 4.0.1-r0.1.1

 

Could you tell what is missing.

 

Cheers Colin

 

FYI

Attached Files

•  installed.txt   13.9KB   33 downloads

[ColinB]

Did you place the firmware in /lib/firmware ?

 

Sorry Athoik we seem to be jumping about here.

 

I dont have any firmware

[athoik]

If you havent run those, run then.
 

init 4
mv /dev/dvb/adapter1/frontend0 /dev/dvb/adapter1/frontend2
mv /dev/dvb/adapter1/frontend1 /dev/dvb/adapter1/frontend0
init 3

And see of that works.

 
This is the output
dmesg-05.PNG

If you take a look on the picture above, you will notice that firmware is missing.

Direct firmware load for dvb-demod-mn88473-01.fw failed with error -2

You can find firmware here: http://palosaari.fi/...are/MN88473/01/

In order to download you need to run the following:

cd /lib/firmware
wget http://palosaari.fi/linux/v4l-dvb/firmware/MN88473/01/latest/dvb-demod-mn88473-01.fw
reboot

Then after reboot, run again those:

init 4
mv /dev/dvb/adapter1/frontend0 /dev/dvb/adapter1/frontend2
mv /dev/dvb/adapter1/frontend1 /dev/dvb/adapter1/frontend0
init 3

See if that works.

Post the following commands in text (not pictures).

dmesg

cat /proc/bus/nim_sockets

opkg install v4l-utils

dvb-fe-tool -a 1 -f 0
dvb-fe-tool -a 1 -f 1

[ColinB]

 

 

If you havent run those, run then.
 

init 4
mv /dev/dvb/adapter1/frontend0 /dev/dvb/adapter1/frontend2
mv /dev/dvb/adapter1/frontend1 /dev/dvb/adapter1/frontend0
init 3

And see of that works.

 

 
This is the output
dmesg-05.PNG

 

If you take a look on the picture above, you will notice that firmware is missing.

Direct firmware load for dvb-demod-mn88473-01.fw failed with error -2

You can find firmware here: http://palosaari.fi/...are/MN88473/01/

In order to download you need to run the following:

cd /lib/firmware
wget http://palosaari.fi/linux/v4l-dvb/firmware/MN88473/01/latest/dvb-demod-mn88473-01.fw
reboot

Then after reboot, run again those:

init 4
mv /dev/dvb/adapter1/frontend0 /dev/dvb/adapter1/frontend2
mv /dev/dvb/adapter1/frontend1 /dev/dvb/adapter1/frontend0
init 3

See if that works.

Post the following commands in text (not pictures).

dmesg

cat /proc/bus/nim_sockets

opkg install v4l-utils

dvb-fe-tool -a 1 -f 0
dvb-fe-tool -a 1 -f 1

 

Thanks I'm working on it

[ColinB]

dmesg:

 

hci-brcm ehci-brcm.2: irq 61, io mem 0x10490300
ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm ehci-brcm.3: Broadcom STB EHCI
ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
ehci-brcm ehci-brcm.3: irq 62, io mem 0x10490500
ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
ohci-brcm ohci-brcm.0: irq 58, io mem 0x10480400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
ohci-brcm ohci-brcm.1: irq 59, io mem 0x10480600
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: KINGSTON SV300S37A240G, 603ABBF0, max UDMA/133
ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 63, io mem 0x10490400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 64, io mem 0x10490600
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
Driver 'mmcblk' needs updating - please use bus_type methods
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright© Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
sdhci-brcmstb sdhci-brcmstb.0: No vmmc regulator found
sdhci-brcmstb sdhci-brcmstb.0: No vqmmc regulator found
usb 2-1: new high-speed USB device number 2 using ehci-brcm
mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
sdhci-brcmstb sdhci-brcmstb.1: Disabled by bootloader
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS1: setting up NAND flash (primary)
nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc
nand: Samsung NAND 512MiB 3,3V 8-bit
nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4

Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
nand_read_bbt: bad block at 0x000006880000
nand_read_bbt: bad block at 0x00000dd60000
nand_read_bbt: bad block at 0x000014b00000
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000020000000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x000020000000 : "rootfs"
EBI CS0: setting up SPI flash
brcm_setup_spi_flash: can't locate SPI master
brcm_setup_cs: can't register SPI flash (error -19)
ubi0: default fastmap pool size: 200
ubi0: default fastmap WL pool size: 25
ubi0: attaching mtd2
ata2: SATA link down (SStatus 0 SControl 300)
ubi0: attached by fastmap
ubi0: fastmap pool size: 200
ubi0: fastmap WL pool size: 25
ubi0: attached mtd2 (name "rootfs", size 506 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 4041, bad PEBs: 7, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 71/37, WL threshold: 4096, image sequence number: 994976721
ubi0: available PEBs: 0, total reserved PEBs: 4041, PEBs reserved for bad PEB handling: 73
ubi0: background thread "ubi_bgt0d" started, PID 65
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
UBIFS: background thread "ubifs_bgt0_0" started, PID 66
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 501682176 bytes (478 MiB, 3951 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID E0C5EE8A-7BAF-467C-9C8A-52B52CBCA9C2, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:13.
devtmpfs: mounted
Freeing unused kernel memory: 268K (808ed000 - 80930000)
usb 8-1: new full-speed USB device number 2 using ohci-brcm
random: nonblocking pool is initialized
EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
usbcore: registered new interface driver tpm
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
i2c i2c-3: This adapter will soon drop class based instantiation of devices. Please make sure client 0x48 gets instantiated by other means. Check 'Documentation/i2c/instantiating-devices' for details.
i2c i2c-0: This adapter will soon drop class based instantiation of devices. Please make sure client 0x4b gets instantiated by other means. Check 'Documentation/i2c/instantiating-devices' for details.
Console: switching to colour frame buffer device 160x45
input: dreambox remote control (native) as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
DVB: registering new adapter (dvb0)
i2c i2c-3: This adapter will soon drop class based instantiation of devices. Please make sure client 0x08 gets instantiated by other means. Check 'Documentation/i2c/instantiating-devices' for details.
i2c i2c-4: This adapter will soon drop class based instantiation of devices. Please make sure client 0x08 gets instantiated by other means. Check 'Documentation/i2c/instantiating-devices' for details.
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
usb 2-1: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Astrometa DVB-T2)
i2c i2c-7: Added multiplexed i2c bus 8
rtl2832 7-0010: Realtek RTL2832 successfully attached
mn88473: module is from the staging directory, the quality is unknown, you have been warned.
mn88473 7-0018: Panasonic MN88473 successfully attached
usb 2-1: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
usb 2-1: DVB: registering adapter 1 frontend 1 (Panasonic MN88473)...
r820t 8-003a: creating new instance
r820t 8-003a: Rafael Micro r820t successfully identified
r820t 8-003a: attaching existing instance
r820t 8-003a: Rafael Micro r820t successfully identified
Registered IR keymap rc-empty
input: Astrometa DVB-T2 as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0/input3
rc0: Astrometa DVB-T2 as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0
usb 2-1: dvb_usb_v2: schedule remote query interval to 400 msecs
usb 2-1: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_rtl28xxu
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
bcm7429_pm_network_enable 00
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
bcmgenet bcmgenet.0 eth0: link up, 100 Mbps, full duplex
NET: Registered protocol family 10
r820t 8-003a: r820t_read: i2c rd failed=-32 reg=00 len=2: e2 81
platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)...
r820t 8-003a: r820t_read: i2c rd failed=-32 reg=00 len=2: 61 25
CPU 0 Unable to handle kernel paging request at virtual address 00000028, epc == 804f5148, ra == e1ba0224
Oops[#1]:
CPU: 0 PID: 585 Comm: kdvb-ad-1-fe-1 Tainted: GF        C O    4.0.1 #1
task: cf6cabe8 ti: cf504000 task.ti: cf504000
$ 0   : 00000000 10008700 804f5124 00000001
$ 4   : 00000000 808c4410 e1ba1910 00000002
$ 8   : cf505fe0 00008700 8072a464 66223680
$12   : 0000004d 00000400 00000000 ffffffff
$16   : 8a0c8b22 00000000 00000000 80530990
$20   : cd9a3000 cdb67c00 cd9a3190 00010000
$24   : 00000000 e1ba1100                  
$28   : cf504000 cf505de0 808a3b60 e1ba0224
Hi    : 000002ad
Lo    : faa0bef2
epc   : 804f5148 i2c_lock_adapter+0x24/0x38
    Tainted: GF        C O   
ra    : e1ba0224 rtl2832_bulk_write+0x34/0x7c [rtl2832]
Status: 10008703    KERNEL EXL IE
Cause : 00800008
BadVA : 00000028
PrId  : 00025a11 (Broadcom BMIPS5000)
Modules linked in: ipv6 r820t mn88473© regmap_i2c rtl2832 dvb_usb_rtl28xxu dvb_usb_v2 dvb(OF) modloader2(O) modloader(O) tpm(O)
Process kdvb-ad-1-fe-1 (pid: 585, threadinfo=cf504000, task=cf6cabe8, tls=00000000)
Stack : e1a65bc0 e1a63d24 cf504000 cf505e10 0000010c e1ba1910 00000002 000002ad
      faa0bef2 e1ba01f0 8a0c8b22 e1ba113c 80530990 e1a63dc0 80530990 e1a51b0c
      8180e1b8 cef60000 cef60250 cdaac818 80530990 e1a51da8 cdbafc4c cdbafc58
      80924180 00000000 00000003 00000001 cdaac818 cdaac818 cdaac818 8052f280
      cf6cb158 cf6cabe8 8089e100 cd04aa00 cdaa7f80 805309e8 10008701 cf6cabe8
      ...
Call Trace:
[<804f5148>] i2c_lock_adapter+0x24/0x38
[<e1ba0224>] rtl2832_bulk_write+0x34/0x7c [rtl2832]
[<e1ba113c>] rtl2832_enable_slave_ts+0x3c/0x15c [rtl2832]
[<e1a51da8>] dvb_usb_fe_init+0xb0/0x180 [dvb_usb_v2]
[<8052f280>] dvb_frontend_init+0x20/0x78
[<805309e8>] dvb_frontend_thread+0x58/0x504
[<800442c8>] kthread+0x10c/0x124
[<800082c8>] ret_from_kernel_thread+0x14/0x1c


Code: 10600005  00000000  00602021 <8c820028> 1440fff8  2443ffd8  081c7e45  24840010  3c05808c
---[ end trace 57395cc1dae3c893 ]---

 

Then:

 

cat /proc/bus/nim_sockets
opkg install v4l-utils
dvb-fe-tool -a 1 -f 0
dvb-fe-tool -a 1 -f 1

 

root@et8000:/media/hdd# cat /proc/bus/nim_sockets
NIM Socket 0:
        Type: DVB-S2
        Name: AVL6211
        Has_Outputs: yes
        Internally_Connectable: 0
        Frontend_Device: 0
        I2C_Device: 3
NIM Socket 1:
        Type: DVB-S2
        Name: AVL6211
        Has_Outputs: yes
        Internally_Connectable: 0
        Frontend_Device: 1
        I2C_Device: 4
root@et8000:/media/hdd# cat /proc/bus/nim_sockets> nim_sockets.txt
root@et8000:/media/hdd# opkg install v4l-utils
Installing v4l-utils (1.6.2-r0.0) on root.
Downloading http://downloads.pli....0_mips32el.ipk.
Installing libv4l (1.6.2-r0.0) on root.
Downloading http://downloads.pli....0_mips32el.ipk.
Configuring libv4l.
Configuring v4l-utils.
root@et8000:/media/hdd# dvb-fe-tool -a l -f 0
Device DVB-S2 (/dev/dvb/adapter0/frontend0) capabilities:
     CAN_2G_MODULATION
     CAN_FEC_1_2
     CAN_FEC_2_3
     CAN_FEC_3_4
     CAN_FEC_5_6
     CAN_FEC_6_7
     CAN_FEC_7_8
     CAN_FEC_8_9
     CAN_FEC_AUTO
     CAN_INVERSION_AUTO
     CAN_QPSK
     CAN_TRANSMISSION_MODE_AUTO
     HAS_EXTENDED_CAPS
DVB API Version 5.10, Current v5 delivery system: DVBS2
Supported delivery systems:
     DVBS
    [DVBS2]
DiSEqC VOLTAGE: OFF
ERROR    FE_SET_VOLTAGE: Operation not permitted
root@et8000:/media/hdd# dvb-fe-tool -a l -f 1
Device DVB-S2 (/dev/dvb/adapter0/frontend1) capabilities:
     CAN_2G_MODULATION
     CAN_FEC_1_2
     CAN_FEC_2_3
     CAN_FEC_3_4
     CAN_FEC_5_6
     CAN_FEC_6_7
     CAN_FEC_7_8
     CAN_FEC_8_9
     CAN_FEC_AUTO
     CAN_INVERSION_AUTO
     CAN_QPSK
     CAN_TRANSMISSION_MODE_AUTO
     HAS_EXTENDED_CAPS
DVB API Version 5.10, Current v5 delivery system: DVBS
Supported delivery systems:
    [DVBS]
     DVBS2
DiSEqC VOLTAGE: OFF
ERROR    FE_SET_VOLTAGE: Operation not permitted

 

e2 is locked up.

 

cmd: shutdown -r now

 

After rebbot

 

openpli 4 et8000


et8000 login: root
root@et8000:~# dmesg
__clk_disable: moca [0]
bcm40nm_pm_moca_disable 00
__clk_disable: moca_genet [0]
bcm40nm_pm_genet1_disable 00
__clk_disable: network [0]
bcm7429_pm_network_disable 00
bcmgenet: probe of bcmgenet.1 failed with error -5
usbcore: registered new interface driver zd1201
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm40nm_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 56, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-brcm ehci-brcm.2: Broadcom STB EHCI
ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
ehci-brcm ehci-brcm.2: irq 61, io mem 0x10490300
ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm ehci-brcm.3: Broadcom STB EHCI
ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
ehci-brcm ehci-brcm.3: irq 62, io mem 0x10490500
ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
ohci-brcm ohci-brcm.0: irq 58, io mem 0x10480400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
ohci-brcm ohci-brcm.1: irq 59, io mem 0x10480600
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: KINGSTON SV300S37A240G, 603ABBF0, max UDMA/133
ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 63, io mem 0x10490400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 64, io mem 0x10490600
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
Driver 'mmcblk' needs updating - please use bus_type methods
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright© Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
sdhci-brcmstb sdhci-brcmstb.0: No vmmc regulator found
sdhci-brcmstb sdhci-brcmstb.0: No vqmmc regulator found
usb 2-1: new high-speed USB device number 2 using ehci-brcm
mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
sdhci-brcmstb sdhci-brcmstb.1: Disabled by bootloader
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS1: setting up NAND flash (primary)
nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc
nand: Samsung NAND 512MiB 3,3V 8-bit
nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4

Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
nand_read_bbt: bad block at 0x000006880000
nand_read_bbt: bad block at 0x00000dd60000
nand_read_bbt: bad block at 0x000014b00000
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000020000000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x000020000000 : "rootfs"
EBI CS0: setting up SPI flash
brcm_setup_spi_flash: can't locate SPI master
brcm_setup_cs: can't register SPI flash (error -19)
ubi0: default fastmap pool size: 200
ubi0: default fastmap WL pool size: 25
ubi0: attaching mtd2
ata2: SATA link down (SStatus 0 SControl 300)
ubi0: attached by fastmap
ubi0: fastmap pool size: 200
ubi0: fastmap WL pool size: 25
ubi0: attached mtd2 (name "rootfs", size 506 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 4041, bad PEBs: 7, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 71/37, WL threshold: 4096, image sequence number: 994976721
ubi0: available PEBs: 0, total reserved PEBs: 4041, PEBs reserved for bad PEB handling: 73
ubi0: background thread "ubi_bgt0d" started, PID 65
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
UBIFS: background thread "ubifs_bgt0_0" started, PID 66
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 501682176 bytes (478 MiB, 3951 LEBs), journal size 9023488 bytes (8 MiB, 72 LEB
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID E0C5EE8A-7BAF-467C-9C8A-52B52CBCA9C2, small
usb 8-1: new full-speed USB device number 2 using ohci-brcm
VFS: Mounted root (ubifs filesystem) on device 0:13.
devtmpfs: mounted
Freeing unused kernel memory: 268K (808ed000 - 80930000)
random: nonblocking pool is initialized
EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
usbcore: registered new interface driver tpm
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
i2c i2c-3: This adapter will soon drop class based instantiation of devices. Please make sure c
umentation/i2c/instantiating-devices' for details.
i2c i2c-0: This adapter will soon drop class based instantiation of devices. Please make sure c
umentation/i2c/instantiating-devices' for details.
Console: switching to colour frame buffer device 160x45
input: dreambox remote control (native) as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
DVB: registering new adapter (dvb0)
i2c i2c-3: This adapter will soon drop class based instantiation of devices. Please make sure c
umentation/i2c/instantiating-devices' for details.
i2c i2c-4: This adapter will soon drop class based instantiation of devices. Please make sure c
umentation/i2c/instantiating-devices' for details.
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
usb 2-1: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Astrometa DVB-T2)
i2c i2c-7: Added multiplexed i2c bus 8
rtl2832 7-0010: Realtek RTL2832 successfully attached
mn88473: module is from the staging directory, the quality is unknown, you have been warned.
mn88473 7-0018: Panasonic MN88473 successfully attached
usb 2-1: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
usb 2-1: DVB: registering adapter 1 frontend 1 (Panasonic MN88473)...
r820t 8-003a: creating new instance
r820t 8-003a: Rafael Micro r820t successfully identified
r820t 8-003a: attaching existing instance
r820t 8-003a: Rafael Micro r820t successfully identified
Registered IR keymap rc-empty
input: Astrometa DVB-T2 as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0/input3
rc0: Astrometa DVB-T2 as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0
usb 2-1: dvb_usb_v2: schedule remote query interval to 400 msecs
usb 2-1: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_rtl28xxu
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
bcm7429_pm_network_enable 00
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
bcmgenet bcmgenet.0 eth0: link up, 100 Mbps, full duplex
NET: Registered protocol family 10
platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)...
usb 2-1: dvb_usb_v2: rc.query() failed=-145
rtl2832 7-0010: i2c reg read failed -145
r820t 8-003a: r820t_write: i2c wr failed=-145 reg=16 len=1: c0
root@et8000:~#

[ColinB]

double post

Edited by ColinB, 26 April 2016 - 20:08.

[ColinB]

Tried again

 

openpli 4 et8000


et8000 login: root
root@et8000:~# init 4
root@et8000:~# mv /dev/dvb/adapter1/frontend0 /dev/dvb/adapter1/frontend2
root@et8000:~# mv /dev/dvb/adapter1/frontend1 /dev/dvb/adapter1/frontend0
root@et8000:~# init 3
root@et8000:~#

 

And e2 is stuck on boot picture, no response with remote control.

 

Same dmesg:

 

i2c i2c-4: This adapter will soon drop class based instantiation of devices. Please make sure client 0x08 gets instantiated by ot
umentation/i2c/instantiating-devices' for details.
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
usb 2-1: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Astrometa DVB-T2)
i2c i2c-7: Added multiplexed i2c bus 8
rtl2832 7-0010: Realtek RTL2832 successfully attached
mn88473: module is from the staging directory, the quality is unknown, you have been warned.
mn88473 7-0018: Panasonic MN88473 successfully attached
usb 2-1: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
usb 2-1: DVB: registering adapter 1 frontend 1 (Panasonic MN88473)...
r820t 8-003a: creating new instance
r820t 8-003a: Rafael Micro r820t successfully identified
r820t 8-003a: attaching existing instance
r820t 8-003a: Rafael Micro r820t successfully identified
Registered IR keymap rc-empty
input: Astrometa DVB-T2 as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0/input3
rc0: Astrometa DVB-T2 as /devices/platform/ehci-brcm.1/usb2/2-1/rc/rc0
usb 2-1: dvb_usb_v2: schedule remote query interval to 400 msecs
usb 2-1: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_rtl28xxu
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
bcm7429_pm_network_enable 00
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
bcmgenet bcmgenet.0 eth0: link up, 100 Mbps, full duplex
NET: Registered protocol family 10
platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)...
usb 2-1: dvb_usb_v2: rc.query() failed=-145
rtl2832 7-0010: i2c reg read failed -145
r820t 8-003a: r820t_write: i2c wr failed=-145 reg=16 len=1: c0
Unhandled kernel unaligned access[#1]:
CPU: 0 PID: 607 Comm: kdvb-ad-1-fe-1 Tainted: GF        C O    4.0.1 #1
task: cfc38578 ti: cfc46000 task.ti: cfc46000
$ 0   : 00000000 10008700 00000000 00000001
$ 4   : 228b228b 0000010c e1ba1910 00000002
$ 8   : cfc47fe0 00008700 00000001 ffffffff
$12   : 00000000 00000000 00000000 00000027
$16   : e1ba01f0 228b228b cdab8018 80530990
$20   : cdaba400 cdbea400 cdaba590 00010000
$24   : 00000000 e1ba1100
$28   : cfc46000 cfc47e10 808a3b60 e1ba113c
Hi    : 00000139
Lo    : d6f2ccc0
epc   : e1ba1138 rtl2832_enable_slave_ts+0x38/0x15c [rtl2832]
    Tainted: GF        C O
ra    : e1ba113c rtl2832_enable_slave_ts+0x3c/0x15c [rtl2832]
Status: 10008703        KERNEL EXL IE
Cause : 80800010
BadVA : 228b22fb
PrId  : 00025a11 (Broadcom BMIPS5000)
Modules linked in: ipv6 r820t mn88473© regmap_i2c rtl2832 dvb_usb_rtl28xxu dvb_usb_v2 dvb(OF) modloader2(O) modloader(O) tpm(O)
Process kdvb-ad-1-fe-1 (pid: 607, threadinfo=cfc46000, task=cfc38578, tls=00000000)
Stack : 80530990 e1a63dc0 80530990 e1a51b0c 8180e1b8 cf0b2000 cf0b2250 cdab8018
          80530990 e1a51da8 cdb65c4c 8180e180 00000000 cfc38578 80730000 cfc387f8
          cdab8018 cdab8018 cdab8018 8052f280 808a0860 cfc38578 8089e100 00000000
          cec4dd00 805309e8 10008701 cfc38578 807f0000 cdbea400 8089e100 8005e7e8
          cfc46000 cdb65c50 cdab8018 80530990 807f0000 cdbea400 cec4dd00 cdb65c50
          ...
Call Trace:
[<e1ba1138>] rtl2832_enable_slave_ts+0x38/0x15c [rtl2832]
[<e1a51da8>] dvb_usb_fe_init+0xb0/0x180 [dvb_usb_v2]
[<8052f280>] dvb_frontend_init+0x20/0x78
[<805309e8>] dvb_frontend_thread+0x58/0x504
[<800442c8>] kthread+0x10c/0x124
[<800082c8>] ret_from_kernel_thread+0x14/0x1c


Code: 261001f0  00808821  0200f809 <8c920070> 10400008  3c13e1ba  8fbf0024  8fb30020  8fb2001c
---[ end trace 72c35412b9d2712e ]---
root@et8000:~#

[athoik]

kernel is crashing..

Most probably paches from upstream required to make it work.

I am sorry but stick is not usable without extra patches.