266 replies to this topic

[dog-man]

It's not ready yet.

[dirocca]

 

 

 

Is this the right one ? :

OpenPLi-4.0-beta-vuuno-20141231_usb.zip 2014/12/31 14:49 - 49.41MB

yep.

 

grtz Philip

 

why I can't downloaded?

 

try again, seems to work now(vu uno).

 

grtz Philip

[dirocca]

VU Ultimo. Timestamp on the site, however no file on the server to download. File was not found on this server.

it seems to work now(vu ultimo), try again.

 

grtz Philip

[S_Hopper]

Opgelost.

[greatred]

 

 

Is this the right one ? :

OpenPLi-4.0-beta-vuuno-20141231_usb.zip 2014/12/31 14:49 - 49.41MB

yep.

 

grtz Philip

 

 

I`m not so sure ... Erik posted @14:48 saying that images will appear in 1-2 hr.

[WanWizard]

The website looks at the upload server for information. So it sees new files as soon as the buildserver is finished and has pushed the image file and the feeds to the upload server.

 

Our download mirrors are maintained by third parties, and we can not directly control when and how they sync with our upload server. This is done via rsync, and with 35+Gb of files you don't want to do that too often (rsync is hugely memory bound, it would completely paralyze their webserver, so no downloads).

 

Usually within an hour all of them are in sync.

[S_Hopper]

Just updated 55 files. All went well. Afterwards I still could not mount HDD of other VU Ultimo as well as an ET10k. From the ET10k to the VU it works well (Cifs).

[Erik Slagter]

You need to reboot after the update, did you do that?

 

After you have done that, can you login and do this: cat /proc/filesystems and post the output?

[christophecvr]

By vuduo2 latest drivers and git (self build) all ok. cat/proc/filesystems

nodev   sysfs
nodev   rootfs
nodev   ramfs
nodev   bdev
nodev   proc
nodev   tmpfs
nodev   devtmpfs
nodev   sockfs
nodev   pipefs
nodev   anon_inodefs
nodev   rpc_pipefs
nodev   devpts
        ext3
        ext2
        ext4
        vfat
nodev   nfs
nodev   nfs4
nodev   cifs
nodev   autofs
        fuseblk
nodev   fuse
nodev   fusectl
nodev   mqueue
nodev   mtd_inodefs
nodev   ubifs

All systems seems to be supported.

[christophecvr]

and cat mtab

 

rootfs / rootfs rw 0 0
ubi0:rootfs / ubifs rw,sync,relatime 0 0
devtmpfs /dev devtmpfs rw,relatime,size=704328k,nr_inodes=150436,mode=755 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
tmpfs /media tmpfs rw,relatime,size=64k 0 0
/dev/sda1 /media/VUDUO vfat rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 0
/dev/sda2 /media/usb ext4 rw,relatime,data=ordered 0 0
tmpfs /var/volatile tmpfs rw,relatime 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0
 

[Erik Slagter]

Great, this is what we want to see.

[ovidijuslr]

Hello vu solo2 after yesterday's flash today 63 updates is a safe to update?

[greatred]

Allright time for UNO report:

 

like I said I tried online update first - it did not went flawlessly, had to run opkg update&& opkg upgrade several times until md5sum mismatch errors disappeared (opkg install <URL of failing package> as last resort).

After upgrade finished the box has been rebooted.

 

cat /proc/filesystems:

nodev   sysfs
nodev   rootfs
nodev   bdev
nodev   proc
nodev   tmpfs
nodev   devtmpfs
nodev   sockfs
nodev   pipefs
nodev   anon_inodefs
nodev   rpc_pipefs
nodev   devpts
        ext3
        ext2
        ext4
nodev   ramfs
        vfat
nodev   nfs
nodev   nfs4
nodev   cifs
nodev   autofs
        fuseblk
nodev   fuse
nodev   fusectl
nodev   mtd_inodefs
nodev   ubifs

kernel-module-ext4 was still installed so I removed it and rebooted again. ext4 partitions have been mounted.

Great job Erik and anyone who worked on this very-last-day-of-the-year-working-image

 

To sum things up: the image for VU+ Uno is working fine.

Keep in mind that flashing it would be much wiser choice than doing an online updated. If you although insist to update it, I would recommend to do it via console and prepare to overcome some issues.

 

Have a great 2015 !!! 

Edited by greatred, 31 December 2014 - 18:33.

[ovidijuslr]

Happy new year to everyone

[Erik Slagter]

These models have been tested with the image generated today (after 13:00) and found to be good for upgrade (no flash necessary):

 

- uno

- zero

- solose

- duo

- ultimo

- duo2

 

I think the other two (solo, solo2) will be ok as well.

 

These images will have the ext4 and the cifs issues resolved.

 

Note: the issue with the vuplus-poweroff package remains. This package may be electable for upgrade sometimes (although no real changes occur in this package). As a result of the upgrade (the package removal stage, actually), the receiver is shutdown and powered off, even during the upgrade. There is a workaround for this problem: log in to the receiver and type this:

chmod 000 /usr/bin/turnoff_power

After that, the update can be safely carried out. It is is no longer necessary to completely flash the image, as per notice with the image.

 

If this procedure appears to be too much hassle, you can still perform a complete image flash.

Edited by Erik Slagter, 31 December 2014 - 19:13.

[Taykun345]

I can confirm that update works fine on DUO2. Do not forget to execute command that Erik wrote, otherwise receiver will turn off during upgrade.

Edited by Taykun345, 31 December 2014 - 19:23.

[dog-man]

Anyone flashed their vuduo+?

[Erik Slagter]

Yes in the dutch section, confirmed working.

[dog-man]

I can confirm that the flash for vuduo+ is fine.

 

I found another 2 updates after flashing and it seems to be working normally.

 

 

dog-man...

[ian1095]

I can confirm the online update is ok for the Solo

 

It took 3 updates though,the first had 336 updates,the second 256 and the third 37. Upon running it a fourth time it finally displayed no updates available.

 

In the about menu I can see that enigma is from the 31st and the drivers also from the 31st and the kernel is the latest version

 

So all seems fine.

 

Ian.