Posted 31 December 2014 - 00:26
That seems to be an issue with a different authentication mechanism in newer drivers. If you do a mount on the commandline, and add "sec=ntlm" to the options, the share does mount.
Enigma currently doesn't have support for this feature, so this will not be solved overnight I'm afraid.
What exactly works, and what doesn't (i.e. from where to where)?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 31 December 2014 - 10:49
Posted 31 December 2014 - 14:29
Hi I am new to openPli...I have been on vix for a couple of years and have decided to change and try openPli....latest build (30th) is hanging at the boot screen on vu+duo....any help please?
Posted 31 December 2014 - 14:31
OpenPli on the vuduo+ has major problems at the moment.
Read other posts in this forum.
I would go back to Vix for the moment.
Posted 31 December 2014 - 14:35
ok thankyou for the quick response hope it gets sorted soon 
Posted 31 December 2014 - 14:38
OpenPli on the vuduo+ has major problems at the moment.
Read other posts in this forum.
I would go back to Vix for the moment.
ok thankyou for the quick response hope it gets sorted soon
http://forums.openpl...ndpost&p=466315
grtz Philip
vuduo2 openpli6.1 1TB HDD 2xdualS2tuner
av receiver denon - samsung 4k hdr+ 65inch UE65MU7000 - bose accoustimas 7.1 
tvv kaart & schotel(64cm), duo lnb, OSCAM
logitech harmony ultimate
Posted 31 December 2014 - 14:46
I expect usable images in 1-2 hours.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 31 December 2014 - 15:19
should i be concerened since putting openPli on then reverting back to vix even vix is hanging at bootloading screen
Posted 31 December 2014 - 15:23
Have you tried powering down by the switch on the rear then back on again.
Posted 31 December 2014 - 15:29
yea m8 tried it all....lol a bit gutted now 
Posted 31 December 2014 - 17:42
Is it now safe to flash today's image on a vuduo+?
Posted 31 December 2014 - 19:15
Please continue here: http://forums.openpl...e-9#entry466456
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 1 January 2015 - 01:47
If you do a mount on the commandline, and add "sec=ntlm" to the options, the share does mount.
Sorry .. But I do not know where or how to do that
Posted 1 January 2015 - 11:33
You will have to use telnet to login to the box from your PC:
telnet <ip-address>
once logged in with user 'root', you use the command
mkdir /media/cifs mount -t cifs //<server-ip>/<share> /media/cifs -o sec=ntlm,username=<username>,password=<password>
and it should mount without problems.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 1 January 2015 - 12:28
You will have to use telnet to login to the box from your PC:
telnet <ip-address>once logged in with user 'root', you use the command
mkdir /media/cifs mount -t cifs //<server-ip>/<share> /media/cifs -o sec=ntlm,username=<username>,password=<password>and it should mount without problems.
Have tried in many ways now
I.m not so good in this
vuduo login: root
root@vuduo:~#
root@vuduo:~# [6nmkdir /media/cifs
mkdir: can't create directory '/media/cifs': File exists
root@vuduo:~# mount -t cifs //<192.168.0.111>/<Download@NAS> /media/cifs -o s
ec=ntlm
-sh: can't open 192.168.0.111: no such file
root@vuduo:~#
Posted 1 January 2015 - 12:32
The shell chokes on the '<' and '>'. Is the share really called '<Download@NAS>'? Then you should use quotes. Also type everything on one line, like this:
mount -t cifs -o sec=ntlm '//192.168.0.111/<Download@NAS>' /media/cifs
Edited by WanWizard, 1 January 2015 - 13:01.
without the < and >... ;)
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 1 January 2015 - 14:23
Posted 1 January 2015 - 21:02
Thanks for the feedback. We're trying to find a way to solve this issue so the workaround is no longer needed.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 1 January 2015 - 23:35
The shell chokes on the '<' and '>'. Is the share really called '<Download@NAS>'? Then you should use quotes. Also type everything on one line, like this:
mount -t cifs -o sec=ntlm '//192.168.0.111/<Download@NAS>' /media/cifs
I have no success. Maybe its the share name that is wrong. But I have take it from what I can see if I do it in the VU menu
Posted 2 January 2015 - 10:01
0 members, 6 guests, 0 anonymous users
