267 replies to this topic

[Erik Slagter]

I now have the blindscan utils installed, but still the same, even after power cycle.

 

The package includes:

/usr/bin/vuplus_6211_blindscan
/usr/bin/vuplus_blindscan
/usr/bin/vuplus_6222_blindscan

Maybe the plugin is using the wrong binary (/location).

[blzr]

In the meantime, users can "fix" the issue by manually installing the virtual package virtual/blindscan-dvbs.

 

for et9x00 the problem is that nothing provides blindscan utils (as I tried awkwardly to explain already)

 

and when you try to install it manually, then, surprise :

root@et9x00:~# opkg install virtual/blindscan-dvbs
Installing dreambox-blindscan-utils (1.7-r1.4) on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/mips32el/dreambox-blindscan-utils_1.7-r1.4_mips32el.ipk.
Installing libncurses5 (5.9-r15.1.10) on root.

[Erik Slagter]

Et9x00 has a dependency on dreambox-blindscan-utils? That's not right. IIRC these are actually more or less generic dvb-c scanning tools. I will have to check.

[altobelli]

Hallo,

Blindscan werkt niet meer na de laatste update, ik heb een et 9500

Blindscan isn't working anymore after the last update. I owe a ET9500.

Edited by Frenske, 4 March 2015 - 09:36.
Only english in this section please. I updated your message.

[jdavid22]

Hallo,

Blindscan werkt niet meer na de laatste update, ik heb een et 9500

Blindscan isn't working anymore after the last update. I owe a ET9500.

I confirm ... blindscan not work with recent updates. I Vu SOLO2.

[Erik Slagter]

On the VU+Duo2 it works now, I guess the VU+Solo2 as well. Problem was a missing dependency. Remove the plugin and reinstall it, it should installed the blindscan binary as well nu.

[blzr]

I'm affraid the plugin still needs some adjustment (regarding binaries path) to work:
http://forums.openpl...ndpost&p=479318 and following discussion...

[Dimitrij]

Erik Slagter

Really need this patch:

http://forums.openpl...ndpost&p=479318

[blzr]

@all (whom it may concern )
could you please confirm if blindscan finally works on vu+/et9x00 boxes after today's update?
(it should, actually, but just to make sure...)

[Rob van der Does]

Working perfect on the 9k.

 

 blindscan_19E_12-03-2015_14-47-59.xml   13.07KB   27 downloads

Edited by SatKiekerd, 12 March 2015 - 14:52.

[ricki]

not working on my solo2

[el bandido]

Not working on my Duo2 either.

[blzr]

could you please post the output of:

opkg list-installed | grep blindscan

(btw. for some unknown reason searching  by opkg list-installed *blindscan* falsely finds nothing here /!?/)

 

and as to vusolo2, according to manufacturer's bsp layer, only vuduo2, vuultimo, vuuno and vusolose are blindscan capable

https://github.com/v...er/conf/machine

if that's not true, they need to correct vusolo2.conf (and maybe others?) then, so that blindscan binaries are provided for it also...

Edited by blzr, 12 March 2015 - 19:46.

[Rob van der Does]

I can assure you that the Solo2 is blindscan capable; does even the best job of all my boxes.

[ricki]

root@vusolo2:~# opkg list-installed | grep blindscan                      
dreambox-blindscan-utils - 1.7-r1.4                                       
enigma2-plugin-systemplugins-blindscan - experimental-git3964+87f93cf-r0.0
root@vusolo2:~#                                                         

[blzr]

see my previous post, the part regarding solo2 - blindscan won't work for this box until its machine conf file is adjusted in vuplus bsp layer (maintained by vu)

 

(and @devs, please change architecture of dreambox-blindscan-utils to MACHINE_ARCH, been mentioned a few times already...)

[Erik Slagter]

Yes, the machine_feature blindscan-dvbs that has been included in the config of the solo2 before, has vanished, it should return. I will request that.

[Huevos]

see my previous post, the part regarding solo2 - blindscan won't work for this box until its machine conf file is adjusted in vuplus bsp layer (maintained by vu)

 

(and @devs, please change architecture of dreambox-blindscan-utils to MACHINE_ARCH, been mentioned a few times already..

Solo2 has the best blindscan tuner in the Vu+ range. Blindscan works fine on the Solo2 using the OE-A version, and as far as I know Dima73 used that STB when modifying the plugin for OpenPLi.

[el bandido]

could you please post the output of:

opkg list-installed | grep blindscan

(btw. for some unknown reason searching  by opkg list-installed *blindscan* falsely finds nothing here /!?/)

 

and as to vusolo2, according to manufacturer's bsp layer, only vuduo2, vuultimo, vuuno and vusolose are blindscan capable

https://github.com/v...er/conf/machine

if that's not true, they need to correct vusolo2.conf (and maybe others?) then, so that blindscan binaries are provided for it also...

I had been rolling back the firmware updates in order to keep a working blindscan plugin. As of tonight, both the old and new blindscan plugins work. Thanks! EB
 

Both of these work for me now without any issues.

root@vuduo2:~# opkg list-installed | grep blindscan
enigma2-plugin-systemplugins-blindscan - 1.4
vuplus-blindscan-dvbc-utils-vuduo2 - 3.7-r3.0
vuplus-blindscan-dvbs-utils-vuduo2 - 3.7-r3.0
root@vuduo2:~#


vuduo2 login: root
root@vuduo2:~# opkg list-installed | grep blindscan
enigma2-plugin-systemplugins-blindscan - experimental-git3964+87f93cf-r0.0
vuplus-blindscan-dvbc-utils-vuduo2 - 3.7-r3.0
vuplus-blindscan-dvbs-utils-vuduo2 - 3.7-r3.1
root@vuduo2:~#
 

[janejak]

it some diffrent with my:

vuduo2 login: root
root@vuduo2:~# opkg list-installed | grep blindscan
enigma2-plugin-systemplugins-blindscan - experimental-git3964+87f93cf-r0.0
vuplus-blindscan-dvbc-utils-vuduo2 - 3.7-r3.1
vuplus-blindscan-dvbs-utils-vuduo2 - 3.7-r3.1
root@vuduo2:~#