Posted 2 April 2015 - 21:36
Hi....
From some days I see that cross epg doesn't work anymore on my DM800se with rytec sources and XEPGDB.
So I've decided to do some researches in internet.... and I discover that there are serious problems with rytec, seems that isn't a temporary problem!
Someone can explain clearly what happens and if is possible how to solve the problem?
Posted 2 April 2015 - 21:46
I've also tried to update the Rytec sources in the Crossepg menu but I obtain "impossible to recover the rytec sources". I've tried to update XEPGDB but all rytec sources are missing now!
Posted 2 April 2015 - 22:36
XEPGDB is a system from sifteam, and they have stopped providing that service.
Nothing to do with Rytec, they just used the Rytec data as the source.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 2 April 2015 - 22:46
If you want XEPGDB complain at SIFteam. They pulled the plug.
And if you do not know about the morons which are sabotaging our system (intentionally or unintentionally) you have not read anything in this subforum.
One remark, update!!!!!!!
Read this: http://forums.openpl...-sources/page-3
Or install OpenPLi 4 on your dreambox. There is a current version for your box still being produced.
And install XMLTVimport subsequently.
Willy
Edited by doglover, 2 April 2015 - 22:49.
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 3 April 2015 - 12:27
my rytec uk xmltv epg used to take 10 mins to download and save and now it takes under 5 seconds and no epg is showing. why is that?
Posted 3 April 2015 - 12:32
Have you updated? I suspect you are still using the old source file.
Post the epgimport.log pls.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 3 April 2015 - 12:34
how do i get that?
Posted 3 April 2015 - 12:35
sigh....
Read the FAQ's pls.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 3 April 2015 - 12:36
my rytec sources doesn't update however it hasn't been updating for about 2 months but my epg was still downloading and showing up but this morning it didn't show so i don't think the updating is the problem.
Posted 3 April 2015 - 12:43
Yes it is......
Do not be stubborn, and read some of the other threads. Then you will know
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 3 April 2015 - 13:10
Posted 3 April 2015 - 13:16
i cant find the epgimport.log file on my box.
Posted 3 April 2015 - 13:26
Right file, but old content.
You will need the new one. Which can be installed from the feed.
See our FAQ's
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 3 April 2015 - 22:25
so is this the new file?
enigma2-plugin-systemplugins-crossepg_0.6.2_OE2-r2_all.ipk 763.16KB
15 downloads
Posted 4 April 2015 - 07:58
no.
Old version of Crossepg.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 4 April 2015 - 11:53
this is what i found from the faqs page. can you send me the file which would be easier and tell me how to install it onto my box pls?
Posted 4 April 2015 - 12:33
* Where is the epgimport.log
Open the XMLTV importer.
Press now the info or epg button on your remote.
Now you see the log. This log can be saved, and you find the saved fle in /tmp/
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 4 April 2015 - 16:41
i installed the old crossepg plugin which is 0.6.2 and the rytec sources were updating fine however, when i pressed the download button it still took under 5 seconds and no epg was showing. so i think it isn't downloading the rytec UK xmltv file properly. and in the current version which is 0.8.1 it was not updating rytec sources and still not downloading epg properly.
Can you send me the working crosspeg file if that is the issue?
Posted 4 April 2015 - 18:40
Download it from here
The file from tension: enigma2-plugin-systemplugins-crossepg_0.8.1+git429+a8438f1-r3_mips32el.ipk
This is a sligthly different version as mine, which is" enigma2-plugin-systemplugins-crossepg_0.8.1-r2_mipsel.ipk
Install one of these. They work on a current OpenPLi.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Posted 5 April 2015 - 01:02
20150405_002137.jpg 110.4KB
10 downloadsThis file you have given me enigma2-plugin-systemplugins-crossepg_0.8.1+git429+a8438f1-r3_mips32el.ipk doesn't install and i have posted a picture below showing what it says when failing to install.
And this second file you have given enigma2-plugin-systemplugins-crossepg_0.8.1-r2_mipsel.ipk still says "cannot retrieve rytec sources" so both files do not work.
what do you suggest now?
0 members, 10 guests, 0 anonymous users
