Tried your link also, wont go on the ultimo 4K sofar
IPTV Player - development thread
Re: IPTV Player - development thread #3501
Re: IPTV Player - development thread #3503
Re: IPTV Player - development thread #3504
Re: IPTV Player - development thread #3505
Re: IPTV Player - development thread #3506
Posted 19 March 2017 - 00:32
This is all what install script return? I do not think so...
Did you look inside install script?
There is already:
opkg update && opkg install python-html opkg install python-json
So ths is strange.
@amigo next time when you execute some commands please copy whole outputs not only last two lines.
Regards,
SSS
Edited by samsamsam, 19 March 2017 - 00:34.
Re: IPTV Player - development thread #3507
Re: IPTV Player - development thread #3508
Re: IPTV Player - development thread #3509
Posted 20 March 2017 - 22:17
Hi, thanks for the great work so far, I've just got a quick question about auto frame rate switching.
My STB is a Golden Interstar LX3 with the latest OpenVIX 5.0.004 installed with GStreamer 1.11.2 and the latest version of IPTV Player tonight - 147.00.20.00
The box is configured in 1080i and multi frame rate so when watching any satellite channels or IPTV bouquets it will switch between 50 and 60hz accordingly.
I've noticed that when viewing anything via IPTV Player when using either the default config with gstplayer or with exteplayer3 it will not cause a video mode change to match the frame rate.
I can't see any settings in IPTV Player around this - is it not supported?
The frame rate mismatch causes dropped frames and stuttering which isn't there when the frame rate matches.
Here's a snippet from the debug log when a 30fps video was played below (looking at the log it was 29.970fps) and the box stayed in 1080i50 instead of switching to 1080i60
Thanks in advance!
eConnectCallbackObj.__init__ objID[83] OBJ_NUM[14] eConnectCallbackObj.__init__ objID[84] OBJ_NUM[15] ->||||||| onStart cmd[/usr/bin/exteplayer3 -w -p 2 "https://removed" > /dev/null] >>>>>>>>>>>>>>>>>>>>> getE2VideoOptions[{'policy': None, 'aspect': None, 'policy2': None}] >>>>>>>>>>>>>>>>>>>>> getE2VideoOptions[{'policy_choices': ['letterbox', 'panscan', 'bestfit', 'nonlinear'], 'policy2': 'letterbox', 'active': None, 'aspect_choices': ['4:3', '16:9', 'any'], 'aspect': '16:9', 'policy': 'panscan', 'policy2_choices': ['letterbox', 'panscan', 'bestfit', 'nonlinear']}] >>>>>>>>>>>>>>>>>>>>> getE2AudioOptions[{'ac3': 'downmix', 'aac': 'downmix'}] >>>>>>>>>>>>>>>>>>>>> getDefaultAudioOptions[{'ac3': None, 'aac': None}] enableSubtitles >>>> _mapTrack [{u'e': u'V_MPEG4/ISO/AVC', u'ad': 1, u'f': 29970, u'h': 534, u'n': u'und', u'p': -1, u'w': 1280, u'an': 1, u'id': 1}] =============================================== EXCEPTION =============================================== : Traceback (most recent call last): File "\IPTVPlayer\components\iptvextmovieplayer.py", line 1321, in _mapTrack NameError: global name 'p' is not defined =============================================== >>>> _mapTrack [{u'e': u'A_AAC', u'id': 2, u'n': u'eng'}] >>> playback[AudioTracks] = [{'encode': 'AAC', 'id': 2, 'name': 'eng'}] >>>> _mapTrack [{u'e': u'A_AAC', u'id': 2, u'n': u'eng'}] >>> playback[AudioTrack] = {'encode': 'AAC', 'id': 2, 'name': 'eng'} >>> playback[SubtitleTracks] = [] >>>> _mapTrack [{u'e': u'', u'id': -1, u'n': u''}] >>>> _mapTrack [{u'e': u'V_MPEG4/ISO/AVC', u'ad': 1, u'f': 29970, u'h': 534, u'n': u'und', u'p': 1, u'w': 1280, u'an': 1, u'id': 1}] =============================================== EXCEPTION =============================================== : Traceback (most recent call last): File "\IPTVPlayer\components\iptvextmovieplayer.py", line 1321, in _mapTrack NameError: global name 'p' is not defined =============================================== IPTVExtMoviePlayer.onLeavePlayer IPTVExtMoviePlayer.showMessage eConnectCallbackObj.__del__ objID[83] OBJ_NUM[14] eConnectCallbackObj.__del__ objID[84] OBJ_NUM[13] eConnectCallbackObj.__del__ objID[80] OBJ_NUM[12] eConnectCallbackObj.__del__ objID[81] OBJ_NUM[11] eConnectCallbackObj.__del__ objID[82] OBJ_NUM[10] eConnectCallbackObj.__del__ objID[78] OBJ_NUM[9] eConnectCallbackObj.__del__ objID[77] OBJ_NUM[8] eConnectCallbackObj.__del__ objID[79] OBJ_NUM[7] >>>>>>>>>>>>>>>>>>>>> __onClose[{'policy_choices': ['letterbox', 'panscan', 'bestfit', 'nonlinear'], 'policy2': 'letterbox', 'policy': 'panscan', 'aspect_choices': ['4:3', '16:9', 'any'], 'aspect': '16:9', 'videomode_choices': ['pal', 'ntsc', '480i', '576i', '480p', '576p', '720p50', '720p', '1080i50', '1080i', '1080p24', '1080p25', '1080p30', '720p24', '720p25', '720p30', '1080p50', '1080p'], 'policy2_choices': ['letterbox', 'panscan', 'bestfit', 'nonlinear'], 'active': None, 'videomode': '1080i50'}] >>>>>>>>>>>>>>>>>>>>> __onClose[{'policy': 'panscan', 'videomode': '1080i50', 'aspect': '16:9', 'policy2': 'letterbox'}] >>>>>>>>>>>>>>>>>>>>> getE2AudioOptions[{'ac3': 'downmix', 'aac': 'downmix'}] Current video mode [1080i50], previus video mode [1080i50]
Edited by aido, 20 March 2017 - 22:20.
Re: IPTV Player - development thread #3510
Posted 21 March 2017 - 08:59
@aido
After start playback you can change resolution by pressing
Menu - > Video option -> Video mode. IPTVPlayer will remember your selection for movie.
At no point is there an automatic switch - this is because the frame rate is not always properly detected.
The same happen with system movie player.
At now there is no auto switch -
Re: IPTV Player - development thread #3511
Posted 21 March 2017 - 09:03
Where exactly in the plugin settings can be set the web proxy for bbc player ?
Are the IPTV player settings stored in some xml file ? (if yes, I would prefer to edit the configuration directly)
At now there was only support for web proxy gateway: "https://www.englandproxy.co.uk/".
If you interested with proxy server then I can add such option, but you must have first good proxy server because in this host there is need to all data (also audio/video) to go throw proxy.
So, do you have good proxy server which give you English IP?
About setting file - IPTVPlayer store settings with default E2 setting file: /etc/enigma2/settings
Edited by samsamsam, 21 March 2017 - 09:05.
Re: IPTV Player - development thread #3512
Posted 21 March 2017 - 10:12
@aido
After start playback you can change resolution by pressing
Menu - > Video option -> Video mode. IPTVPlayer will remember your selection for movie.
At no point is there an automatic switch - this is because the frame rate is not always properly detected.
The same happen with system movie player.
At now there is no auto switch -
Thanks @samsamsam - apologies I'd never thought to try menu as assumed it would have taken me to the system menu.
Works great thanks
Re: IPTV Player - development thread #3513
Re: IPTV Player - development thread #3514
Re: IPTV Player - development thread #3515
Re: IPTV Player - development thread #3516
Re: IPTV Player - development thread #3517
Posted 22 March 2017 - 19:36
This is free forum and not owned by Iptvplayer!!!
I say cartoonHD does not work for many people that use this plugin. No personal support needed because of author bad manner.
[modbreak=Hemertje]
This is our OpenPli forum, were we have own forum rules!
It is time for you to read them frank087234:
https://forums.openp...tion=rules&f=55
Specially this one: "No namecalling or shouting on the board, respect each other".
Remember you are our guest here, otherwise you are not welcome here anymore!
[/modbreak]
Re: IPTV Player - development thread #3518
Re: IPTV Player - development thread #3519
Posted 22 March 2017 - 20:32
@Gorski,
Posting information about commercial products is not allowed, see our forum rules.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: IPTV Player - development thread #3520
26 user(s) are reading this topic
0 members, 24 guests, 0 anonymous users
-
Bing (2)