Posted 14 September 2015 - 13:17
Hi everybody,
Capture d’écran 2015-09-14 à 14.16.24.png 135.54KB
4 downloads
Vu+ Duo = living room = Salon
Posted 14 September 2015 - 13:30
You have to install the pau plugin to enable recording.
Edited by Just Me, 14 September 2015 - 13:32.
Posted 14 September 2015 - 13:37
The Zero is sold as a Zapper, it can not record. If your vendor told you it can, bring it back. If you didn't check and you assumed, you bought the wrong box.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 September 2015 - 13:45
You have to install the pau plugin to enable recording.
Vu+ Duo = living room = Salon
Posted 14 September 2015 - 13:45
......pau, which was mentioned, is a hack and as such not supported here.
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 14 September 2015 - 13:46
The Zero is sold as a Zapper, it can not record. If your vendor told you it can, bring it back. If you didn't check and you assumed, you bought the wrong box.
Vu + Zero records, error on your part
Vu+ Duo = living room = Salon
Posted 14 September 2015 - 13:48
......pau, which was mentioned, is a hack and as such not supported here.
Okay I did not know, thank you for the information.
Vu+ Duo = living room = Salon
Posted 14 September 2015 - 13:52
The Zero is sold as a Zapper, it can not record. If your vendor told you it can, bring it back. If you didn't check and you assumed, you bought the wrong box.
Vu + Zero records, error on your part
No, it does not. Go to the shop now, buy one, connect it, and record. And you will see it doesn't. And nowhere on the packaging, on the website or in the manual it says that it is capable of recording.
It only records in your install the PAU package, which is a binary hack that patches the drivers. Which is exactly that, a hack, no guarantees whatsoever, no-one knows what it does, and if it will still work after an upgrade. You bought a box that is not made, and not sold, to be capable of recording. Period.
If it doesn't work anymore after an update, and we not made this absolutely clear, then owners of a Zero will come here to whine it doesn't record anymore.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 September 2015 - 14:46
@WanWizard although it's no displayed in the feeds, using the GUI, it's physically still there...
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 14 September 2015 - 14:50
That doesn't mean it's supported, it doesn't mean it isn't a hack, and it doesn't mean the box is sold with the capacity to record.
It's like with CCcam (or any cam): if that stops working tomorrow, you're on your own too, not the manufacturer nor your image builder will be able and willing to fix it when it's broken.
And I find it important that people know this. It isn't a cheap box without a reason. You run the risk of having bought an expensive paper-weight.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 September 2015 - 14:52
That was not what I meant, I was just pointing out to you, that it still exists in the feeds. As I was in the assumption that it was removed 
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 14 September 2015 - 14:55
We had an internal discussion about this over the weekend, and the team has decided that since it doesn't have any impact on the license (it doesn't violate GPL), and no impact on the code (it's an external binary process), that it falls in the same category as a softcam, and we allow those in the feed, so why not this one?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 September 2015 - 15:02
http://forums.openpl...ved#entry504521
I was not aware of this (but I am not part of the dev team )
Apart from that I don't use it, I don't like anyone meddling with the drivers, although there is "IMHO" a high probability that the source is Vu+
Edited by 40H3X, 14 September 2015 - 15:02.
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 14 September 2015 - 15:17
Oops I thought I didn't , but I had it installed 
,that's why I did not see it in the GUI...
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 14 September 2015 - 17:49
It's the other way around: it doesn't say anywhere that the box is not capable of recording. Look for specs of STB's, and you'll hardly ever find any specifications about being able to record......And nowhere on the packaging, on the website or in the manual it says that it is capable of recording.
Posted 14 September 2015 - 18:14
And so, if you buy something, I think it's reasonable that you check wether the device you're going to buy, meets your expectations, either by getting informed from the shop or the manufacturer. If the device is not advertised as being capable of "something", you can take the risk but there is no ground for complaints if the specific feature isn't available.
This not only counts for recording capability, but for lots of other features, users "assume" to be present, appear not to be available, and then go complaining on this forum.
People, please use your common sense. If a receiver is very cheap compared to other receivers, would that be because the manufacturer is a charity organisation or because it simply lacks features the more expensive modules have. Think twice, it's not that hard to understand.
Edited by Erik Slagter, 14 September 2015 - 18:14.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 14 September 2015 - 18:21
.....And nowhere on the packaging, on the website or in the manual it says that it is capable of recording.
It's the other way around: it doesn't say anywhere that the box is not capable of recording.
That is a rubbish argument. It doesn't say it's an expresso machine either. So should I expect it to make coffee?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 September 2015 - 18:24
If there is a software hack to add this feature, yes
Posted 14 September 2015 - 18:31
That is not a reason for buying it. If I need a coffee machine, I buy something that is sold as a coffee machine.
If that hack stops working tomorrow, and you bought the box to have an el-cheapo PVR, you then have a useless box. And nobody is going to help you. If PVR is only a nice to have, well, enjoy it while it lasts...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 September 2015 - 18:31
Maybe we can ask mr. H S Chang to compile another hack, as he did for the recording, to produce something which can make some nice cup of coffee.
Mr. Chang is an employee of VU+ which also commits to http://code.vuplus.c...us_experimental
In the pau code you can read a part:
/home/hschang/work/project/pvrcheck/checkpvr/crypto
0 members, 15 guests, 0 anonymous users
