Are they part of PLi build?
No.
VU Solo 4k support
Started by Rob van der Does, 15 Oct 2015 09:52
644 replies to this topic
Re: VU Solo 4k support #621
-
- PLi® Core member
- 10,275 posts
+347
Excellent
Posted 1 November 2016 - 18:52
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: VU Solo 4k support #622
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 1 November 2016 - 19:01
Most certainly not 
We do NOT have access to the sources of any cam (other than Oscam of course).
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU Solo 4k support #623
-
- Member
- 2 posts
0
Neutral
Posted 1 November 2016 - 22:52
Dimitrij
Thank you. Works great in PLI.
Re: VU Solo 4k support #624
-
- Member
- 10 posts
0
Neutral
Posted 14 November 2016 - 11:32
Hello everybody, I have a question and hope someone will be so kind to give a reply.
Since I'm planning to buy a VU+ solo 4K, I'd like to know if with openpli I'll be able to install and use transmission for torrent download 
I'm coming from dreambox DM8000 where this plugin doesn't work... 
Thanks a lot!
Re: VU Solo 4k support #625
-
- PLi® Core member
- 10,275 posts
+347
Excellent
Posted 14 November 2016 - 14:01
Transmission work for all box/model.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: VU Solo 4k support #626
-
- Member
- 10 posts
0
Neutral
Posted 14 November 2016 - 14:08
Transmission work for all box/model.
Thank you Dimitrij, so I need to update myself 
, I remember starting Transmission blocked DM8000
It has been fixed, thankfully
Re: VU Solo 4k support #627
-
- Member
- 10 posts
0
Neutral
Posted 15 November 2016 - 20:44
Can't understand.. Perhaps I do something wrong.
I installed latest openpli 4, installed transmission plugin, after few minutes I started the transmission plugin, my DM8000 freezes, forced to turn off it by the power rear button..
no hope to solve it 
Re: VU Solo 4k support #628
-
- PLi® Core member
- 70,247 posts
+1,798
Excellent
Posted 15 November 2016 - 20:50
Lack of memory?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: VU Solo 4k support #629
-
- Member
- 10 posts
0
Neutral
Posted 15 November 2016 - 20:56
Don't know, anyway with older images (i.e. dream elite 4) it works.
So I'd like to know if transmission works flawlessly on Vu solo 4K...
Re: VU Solo 4k support #630
-
- Member
- 2 posts
0
Neutral
Posted 22 November 2016 - 13:13
Sorry if this has been asked before but I have not found any good answers when googling.
I think the timeshift/recording function works terrible. Is it my box only? I had similar problems with my old VU+ Duo too.
When I fast forward a recording or time shift using speed 16x for a while (commercials) the picture freezes for 5-10 seconds when I reduce the speed to 8x or go directly to 1x.
Also, when I rewind, the playing pops back to the point where it was playing before the rewind.
I use an internal 650GB 2.5" HDD. I installed the latest OpenPLi a couple of weeks ago.
Re: VU Solo 4k support #631
-
- PLi® Core member
- 70,247 posts
+1,798
Excellent
Posted 22 November 2016 - 13:35
Winding (either forward or back) is a big problem with most boxes, with the VU+ drivers not performing particularly well.
It's better to use the fixed-time skip functions (keys 1/4/7 and 3/6/9), you can define the time skipped in the config.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: VU Solo 4k support #632
-
- Member
- 2 posts
0
Neutral
Posted 23 November 2016 - 09:44
Thanks! I tried the 1/4/7 3/6/9 way and it works very well. Actually much faster than using FF.
Re: VU Solo 4k support #633
-
- Member
- 10 posts
0
Neutral
Posted 7 July 2017 - 22:51
H264 media playback with high ref. count => VU+ Solo 4K is unable to correctly playback H.264 encoded files that exceed Level 4.1 profile of H.264. While level 4.1 is enough for satellite transmissions, there are many downloaded files that exceed this profile, having 8 or 9 reference frames in Full HD (profile 4.1 defines up to 4). VU+ Solo2 can playback those files correctly, so the upgraded VU+ Solo 4K should as well.
Any progress here ? Got VU+ 4k Solo. THX.
Re: VU Solo 4k support #634
-
- PLi® Core member
- 7,185 posts
+323
Excellent
Posted 8 July 2017 - 01:08
We cannot fix that. It's either a driver issue or a chipset limitation. We don't have access to source of the drivers. So ask VU+ to fix it.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
Re: VU Solo 4k support #635
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 8 July 2017 - 03:56
This is a known limitation of the Solo-4k, and a result of it being a pioneer 4k device.
The younger VU's have a newer SoC and should not have this limitation.
Re: VU Solo 4k support #636
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 8 July 2017 - 08:54
H264 media playback with high ref. count => VU+ Solo 4K is unable to correctly playback H.264 encoded files that exceed Level 4.1 profile of H.264. While level 4.1 is enough for satellite transmissions, there are many downloaded files that exceed this profile, having 8 or 9 reference frames in Full HD (profile 4.1 defines up to 4). VU+ Solo2 can playback those files correctly, so the upgraded VU+ Solo 4K should as well.
Any progress here ? Got VU+ 4k Solo. THX.
Bollocks. Excuse the word, but it's really not true. Already my dm800hd (not SE), which has the first and simplest Broadcom HD SoC could play AVC at "high" profile, 5.1 level. Image the next generation SoC's. The only thing is, as we told many times before, is that you cannot play UHD from AVC. Every Broadcom UHD SoC has this limitation.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU Solo 4k support #637
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 8 July 2017 - 08:59
This is a known limitation of the Solo-4k, and a result of it being a pioneer 4k device.
The younger VU's have a newer SoC and should not have this limitation.
I have not encountered (sensible) AVC files that I couldn't play on my Solo4k. The AVC files I encode are high profile, 5.0 level, no problem. One really doesn't need to go above that, blame the person that did the encoding, doesn't know what he's doing.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU Solo 4k support #638
-
- Member
- 10 posts
0
Neutral
Posted 8 July 2017 - 10:10
Is only Ultimo able to play/stream 4K / AVC or only DM can do it ATM ? Thx.
gBollocks. Excuse the word, but it's really not true. Already my dm800hd (not SE), which has the first and simplest Broadcom HD SoC could play AVC at "high" profile, 5.1 level. Image the next generation SoC's. The only thing is, as we told many times before, is that you cannot play UHD from AVC. Every Broadcom UHD SoC has this limitation.
H264 media playback with high ref. count => VU+ Solo 4K is unable to correctly playback H.264 encoded files that exceed Level 4.1 profile of H.264. While level 4.1 is enough for satellite transmissions, there are many downloaded files that exceed this profile, having 8 or 9 reference frames in Full HD (profile 4.1 defines up to 4). VU+ Solo2 can playback those files correctly, so the upgraded VU+ Solo 4K should as well.
Any progress here ? Got VU+ 4k Solo. THX.
Re: VU Solo 4k support #639
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 8 July 2017 - 10:43
AFAIK the Ultimo4k also can't play UHD in AVC. I never tried it though, I don't see the point.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU Solo 4k support #640
-
- Member
- 10 posts
0
Neutral
Posted 8 July 2017 - 12:30
I see. THX.
Is there some box able to stream / transcode IPTV ?
43 user(s) are reading this topic
0 members, 43 guests, 0 anonymous users
