Jump to content


Photo

USB HDD - writing extremely slow

Started by Robinson, 07 Nov 2015 13:20
USB HDD ET9000

  • Please log in to reply
30 replies to this topic

Re: USB HDD - writing extremely slow #21 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 24 December 2015 - 15:03

Ah, it's a usb disk. Then you can also try to use manufacturer tool under windows if manufacturer delivers one.
Regarding smartctl you can try to google whether it's possible to use or not.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: USB HDD - writing extremely slow #22 Pr2

  • PLi® Contributor
  • 6,194 posts

+261
Excellent

Posted 24 December 2015 - 20:03

Have you already replace the capacitor in your ET-9000?

I have mentionned that when the capacitor start to fail the power supply on the USB port get troubles too.

 

But I also had in the past such HDD with a double cable the second cable was only to get more power use 2 USB port for the HDD.

 

You should try to insert a powered USB hub between your ET-9000 and your HDD.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: USB HDD - writing extremely slow #23 Robinson

  • Senior Member
  • 2,621 posts

+30
Good

Posted 24 December 2015 - 20:38

No, I have not replaced any capacitors yet.

They look all right to me although I might not be able to recognize the signs of deterioration properly. 

Attached is a photo from 2 years ago. Could somebody please indicate which of them are most susceptible and perhaps require replacement?

 

By the way, I will try and get hold of a powered hub. I used a 5.1V mobile phone charger but it does not seem to help too much.

 

Attached Files


ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: USB HDD - writing extremely slow #24 Robinson

  • Senior Member
  • 2,621 posts

+30
Good

Posted 25 December 2015 - 12:55

Backup/copy all important files from the USB HDD. And format the SAMSUNG(HM641JX) on the ET9000. Most likely this should improve the situation.

 

It seems to have helped indeed.

Now I get FTP transfers of about 11 MB/s writing to disk and about 7 MB/s reading from it.

I wonder how long it will last.

 

By the way, I only reached this far with smartctl:

root@et9x00:~# smartctl -a /dev/sda1
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.8.7] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

Vendor:               SAMSUNG
Product:              HM641JX
User Capacity:        640,135,028,736 bytes [640 GB]
Logical block size:   512 bytes
Device type:          disk
Local Time is:        Fri Dec 25 12:48:39 2015 CET
Device does not support SMART

Error Counter logging not supported
Device does not support Self Test logging

I don't think it is quite true because it seems to support SMART. CrystalDiskInfo still shows the disk as GOOD.


ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: USB HDD - writing extremely slow #25 Robinson

  • Senior Member
  • 2,621 posts

+30
Good

Posted 25 December 2015 - 18:58

Regarding smartctl you can try to google whether it's possible to use or not.

It seems it is possible with -d usbjmicron option.

So this is how far I got now:

root@et9x00:~# smartctl -d usbjmicron -a /dev/sda1
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.8.7] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HM641JX
Serial Number:    C5881G84AA0NHT
LU WWN Device Id: 5 0000f0 0aa0b0000
Firmware Version: 2AJ10001
User Capacity:    640,135,028,736 bytes [640 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Fri Dec 25 18:49:43 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Error SMART Values Read failed: scsi error medium or hardware error (serious)
Smartctl: SMART Read Values failed.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging

ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: USB HDD - writing extremely slow #26 Robinson

  • Senior Member
  • 2,621 posts

+30
Good

Posted 25 December 2015 - 22:05

A little more:

root@et9x00:~# smartctl -d usbjmicron -a /dev/sda1
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.8.7] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HM641JX
Serial Number:    C5881G84AA0NHT
LU WWN Device Id: 5 0000f0 0aa0b0000
Firmware Version: 2AJ10001
User Capacity:    640,135,028,736 bytes [640 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Fri Dec 25 22:02:00 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Error SMART Values Read failed: scsi error medium or hardware error (serious)
Smartctl: SMART Read Values failed.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Aborted by host               90%      1009         -
# 2  Short offline       Completed without error       00%      1009         -

Device does not support Selective Self Tests/Logging

ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: USB HDD - writing extremely slow #27 Robinson

  • Senior Member
  • 2,621 posts

+30
Good

Posted 27 December 2015 - 16:46

It looks like -d sat goes even further:

root@et9x00:~#  smartctl -d sat -a /dev/sda1
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.8.7] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HM641JX
Serial Number:    C5881G84AA0NHT
LU WWN Device Id: 5 0000f0 0aa0b0000
Firmware Version: 2AJ10001
User Capacity:    640,135,028,736 bytes [640 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Sun Dec 27 16:43:25 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (  25) The self-test routine was aborted by
                                        the host.
Total time to complete Offline
data collection:                ( 9780) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 163) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       19
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   088   087   025    Pre-fail  Always       -       3938
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2489
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       1012
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       93
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       437
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       213
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   064   000    Old_age   Always       -       30 (Min/Max 15/40)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   100   100   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       26777
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       93
225 Load_Cycle_Count        0x0032   097   097   000    Old_age   Always       -       31381

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Aborted by host               90%      1012         -
# 2  Extended offline    Aborted by host               90%      1009         -
# 3  Short offline       Completed without error       00%      1009         -

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Aborted_by_host [90% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Any comments, please?


ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: USB HDD - writing extremely slow #28 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+542
Excellent

Posted 27 December 2015 - 16:49

I see no obvious errors. Either the interface on the STB side (USB) or on the disk side (bridge) is slow. But how and why?


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: USB HDD - writing extremely slow #29 Sjaaky

  • Senior Member
  • 7,443 posts

+41
Good

Posted 30 December 2015 - 22:32

Do you use a usb-tuner simultanously?


Re: USB HDD - writing extremely slow #30 Robinson

  • Senior Member
  • 2,621 posts

+30
Good

Posted 30 December 2015 - 23:35

No, Sjaaky, I don't have a USB tuner or any other devices connected to the front USB slot.

For the moment, after re-initializing the disk it seems to be working OK (7 MB/s write and 11 MB/s read).

Maybe the filesystem on the HDD got screwed up during a power cut or something.


ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: USB HDD - writing extremely slow #31 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+542
Excellent

Posted 1 January 2016 - 10:26

But that would not explain slowness.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Back to [EN] Enduser support

Also tagged with one or more of these keywords: USB HDD, ET9000

5 user(s) are reading this topic

0 members, 5 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support