82 replies to this topic

[indinana]

yes you can :-)

The images in the first post are for original receivers only.

Thanks Bro, I have installed it in my original dm800 and it works like a charm. 

BUT

I am unable to install Flashexpander or any multiboot plugin. Any solution?

[MastaG]

indiana,

 

No I'm afraid not.

I've never used flashexpander myself and I don't know whether it's part of the feed or not.

Maybe someone else can help you who has more experience using these two plugins.

[gorski]

It depends on the structure of the image. PB has built-in Expander, for instance. Otherwise, it should be in the feeds, hopefully a compatible one with your image, that somebody tested and put into the feed... Search on this forum for more info. Under my nick, too.

 

Yes, you can install multiboot plugin for it - see attached... My colleague tried it and used these two plugins to have it all on a USB stick (I think HDD, actually, in his case - but I think this is wrong, if it has moving parts, don't do it!)

 

I use OpenMultiBoot for my ET10000 and XP1000. These are OE-A based images. OpenPLi is the basis but then, on top of that... (Huh, there will be another pillow-fight over this, I fear... )

Attached Files

•  mmboot-dreambox_1.37_all.rar   942.61KB   27 downloads
•  vbdownNew!!! eParted (Partitionierungstool).zip   13.38KB   20 downloads

[ankis]

I have a Dreambox model of D11 BL84 DM800 SE with a SIM card included. Which image can i use?

[MastaG]

You should be able to use the DM800Se image from the first post of this thread :-)

D11 = A8P = Original genuine = Latest DMM drivers.

 

EDIT: Wait.. I'm not sure.

D11 is the revision of your receiver.

You'll have to open it and see what's written on the sim card.

If it's A8P then it's original, if not then PM me instead.

Edited by MastaG, 15 December 2015 - 14:19.

[ankis]

[modbreak]
edit: no links to or support for illegal clone boxes on this forum
[/modbreak]

[buc61b]

MastaG, are you gonna make a image for fulan - spark with taapat driver?!

And chek it out the gstreamer, only one skin worked good, others have problem with resolution...

Regards

[gorski]

This is good to have in any image:

 

http://www.pb-powerb...-43#entry319283

 

Thanx to Reinh@rd!!!

[yuriy1975h]

Good afternoon, there is the question of the image on the platform 711 possible in the next release update driver wifi, namely, to take them to the image of Taapat, but it turns on its image working wifi, and your no, no opportunities for the full check on the performance of your image .

[gorski]

MastaG is fully aware of it and he said he would do that...

 

Now, you need to wait a bit...

[buc61b]

Waiting for the next update

[indinana]

indiana,

 

No I'm afraid not.

I've never used flashexpander myself and I don't know whether it's part of the feed or not.

Maybe someone else can help you who has more experience using these two plugins.

Deat MastG!

It is confirmed that Flashexpander plugin is not available on feeds. 

 

It depends on the structure of the image. PB has built-in Expander, for instance. Otherwise, it should be in the feeds, hopefully a compatible one with your image, that somebody tested and put into the feed... Search on this forum for more info. Under my nick, too.

 

Yes, you can install multiboot plugin for it - see attached... My colleague tried it and used these two plugins to have it all on a USB stick (I think HDD, actually, in his case - but I think this is wrong, if it has moving parts, don't do it!)

 

I use OpenMultiBoot for my ET10000 and XP1000. These are OE-A based images. OpenPLi is the basis but then, on top of that... (Huh, there will be another pillow-fight over this, I fear... )

I have tried Mulitminiboot plugin but without success. Waiting for solution.

[gorski]

And I am telling you it is possible, a colleague did it...

 

What EXACTLY did you do, in detail?

[dany]

Hallo Gentlemen

thank you so much for all your hard work

I have some problems and i will try to explain it to you


1- I have a problem with playing recorded iptv channels here, i mean the extension of my recorded teledunet bouquet is stream ..for example (spacetoon-instant record.stream )
but after tested OpenPLi-4 / Gstreamer 1.7.0 . i see that the extension of my recorded iptv channels is (spacetoon-instant record.ts) and recorded files do not play
so i can record but cannot watch my new recorded files because its with ts extension , but the old recorded files still working very well because they are with stream extension

2- i have another iptv bouquet that works very well with 0.10 gstreamer but with the new gstreamer its only works for few seconds then stopped working

note : for this iptv bouquet should instal livestreamer and livestreamersrv


3- i noticed that i Can't fast forward my recorded files with number 9 ... (5min) when i press number 9 it goes to the end of the recorded file and back to live stream  , but i can use these numbers  7 - 1-4 -3-6 numbers for rewind-playback- forward
the strange thing that i solved this problem after disable enhancedmoviecenter .. i face this problem only when using enhancedmoviecenter with pli neither openatv


i wish that i could explain it to you , im ready for any test-question

regards

[peterbelt]

Install flashextender 

 

first make shure that you have enough space on youre stb and attach a usb to it

unzip flashextender on youre pc and copy it to /usr/lib/enigma2/python/Plugins/Extensions

restart enigma and then go to plugins press flashextender and follow the instructions

 

regards peter

 

 Flashexpander.zip   43.83KB   40 downloadsInstall flashextender 

[fankoosh]

@dany first u should be sure u have installed plugin pau , then for any stream been recorded & its extension end with .ts or .stream both sould be played back & works well as i have tested , but exept for one stream end with .ts & it will not gona playback unliss u do edit & change its extension to .stream by using ur DCC or ony ftb/telnet E2 program & this stream is from teledunet chs , i recorded ART cinema & recording ok , then wanted to play it back but it wont , then i changed the extension of recorded file from .ts to .stream & finall it works ok , try it

[vovan43]

Hi,may be upload on feed plugin HBBTV?

p.s.image very good!thank,s!

[dany]

Hallo fankoosh
thank you for reply
i think pau plugin for some vuboxes that cannot record iptv stream

i have vuduo2 box and donot have problem with record-playing recorded files with all these images openpli 4.0 - openatv 4.2 - openatv 5.1 - openvix 3.2

both images openpli-4-gstreamer-170-master-git and openatv 5.1 are using gstreamer 1.70 .. and i donot have any problem with openatv 5.1
so thats strange why my recorded files end with ts extension instead of stream extension with this testing image (openpli-4-gstreamer-170-master-git) and i cannot play them

 

regards

[fankoosh]

@dany this is happening only with streams recorded from teledunet &  u can handle the problem with easy way as i mentioned & as u know too by changing the extension from .ts  to  .stream & it will work

Edited by fankoosh, 16 December 2015 - 20:53.

[dany]

Hallo fankoosh

yes i know that , and i understand you , but this problem is happening to me only when i use this image  (OpenPLi-4 / Gstreamer 1.7.0 (master git)

every things works very well with all other images and i donot need to change the extension from .ts  to  .stream to work

 

regards