I got it.
Erik please revert this.
I'll find another way.
Did you check #13?
Edited by athoik, 19 December 2015 - 12:36.
Enigma2 tuner config setting broken.
Started by christophecvr, 18 Dec 2015 21:16
42 replies to this topic
Re: Enigma2 tuner config setting broken. #21
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 19 December 2015 - 12:35
Did you check #13?
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Enigma2 tuner config setting broken. #22
-
- PLi® Core member
- 10,328 posts
+350
Excellent
Posted 19 December 2015 - 12:57
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: Enigma2 tuner config setting broken. #23
-
- Senior Member
- 3,131 posts
+140
Excellent
Posted 19 December 2015 - 13:06
I got it.
Erik please revert this.
I'll find another way.
I never studied the details about the settings just always used and never had problems.
But What I well remember before we had for multiples lnb
configure options (called simple) which was then for modus DiSEqC A/B or A/B/C/D (I use A/B/C/D) I do have 4 lnb's. pro tuner. this option is now called Standarduser ???
also there was a advanced option where You could put as much(I thaught it was max 8 or 16 lnb's) and more advanced settings which could be needed for some DiSEqC switches. Actually with this mode I now can only configure 1 lnb and only 1 sattelite ???
Strictly speaking there is even more wrong lately.
Edited by christophecvr, 19 December 2015 - 13:07.
Re: Enigma2 tuner config setting broken. #24
-
- Senior Member
- 83 posts
+2
Neutral
Posted 19 December 2015 - 15:44
So this problem is new to you all?
Because I ask:
I have this problem since May/June.
http://forums.openpl...ation/?p=519960
Vu+ Uno 4K SE and Duo2 @ OpenPLi 6.2
formerly: Vu+ Duo1 -> xTrend et9200 -> VU+ Solo2
Re: Enigma2 tuner config setting broken. #25
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 19 December 2015 - 16:33
I believe Littlesat already merged the updates.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Enigma2 tuner config setting broken. #26
-
- PLi® Contributor
- 1,604 posts
+203
Excellent
Posted 19 December 2015 - 16:52
With enigma git c47c586f50dc67fb14b47c6144fc8e5443607e65 problem still exist.
Restore settings, restart enigma and tuner A is set to nothing.
Only by revert commit 70745dfeb997998e02a6359cf5532115562a97d8 does solve the problem.
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Re: Enigma2 tuner config setting broken. #27
-
- Senior Member
- 423 posts
+2
Neutral
Posted 19 December 2015 - 17:16
Will there be an emergency update?
I also note that the satellite moving icon no longer shows even though it is selected in settings.
Re: Enigma2 tuner config setting broken. #28
-
- Senior Member
- 71 posts
0
Neutral
Posted 19 December 2015 - 18:15
Will there be an emergency update?
I also note that the satellite moving icon no longer shows even though it is selected in settings.
Re: Enigma2 tuner config setting broken. #29
-
- Senior Member
- 71 posts
0
Neutral
Posted 19 December 2015 - 18:17
Salut probleme mise a jour efectuer ce jour tuneur pas configured meme apres redemarage enigma
Re: Enigma2 tuner config setting broken. #30
-
- Senior Member
- 157 posts
+10
Neutral
Posted 19 December 2015 - 18:58
Hi, When will the new update? At VU + Duo for a long time always are two packages that are empty. With this it is impossible to do anything?
Re: Enigma2 tuner config setting broken. #31
-
- PLi® Core member
- 57,176 posts
+698
Excellent
Posted 19 December 2015 - 20:34
Are the commites merged right now.... Or is further action required....
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Enigma2 tuner config setting broken. #32
-
- Senior Member
- 157 posts
+10
Neutral
Posted 19 December 2015 - 21:12
A little uncomfortable tuner settings after a reboot.
Re: Enigma2 tuner config setting broken. #33
-
- PLi® Contributor
- 1,604 posts
+203
Excellent
Posted 19 December 2015 - 21:42
OK now. 
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Re: Enigma2 tuner config setting broken. #34
-
- Senior Member
- 62 posts
+3
Neutral
Posted 19 December 2015 - 22:37
What a total balls up, can not get a picture at all now
Re: Enigma2 tuner config setting broken. #35
-
- Senior Member
- 985 posts
+20
Neutral
Posted 20 December 2015 - 07:22
sonic1: if you can't get a picture. Check your tuner setting:
Menu -> Setup -> Service Searching -> Tuner configuration -> Press OK on Tuner Not configured -> select now with AB left or right the original setting (Simple or Advanced) you had before the problem started todays update solved this issue.
With todays update the issue was solved on xp1000, hope this works for others to.
Sf8HD, sf8008, OpenPli 9.0, fixed lnb 28.2E, 19.2E
Re: Enigma2 tuner config setting broken. #36
-
- Senior Member
- 157 posts
+10
Neutral
Posted 20 December 2015 - 07:54
Vu + Duo after the update is working properly.Only 2 packages are still empty. Thanks
Edited by ciciol, 20 December 2015 - 07:56.
Re: Enigma2 tuner config setting broken. #37
-
- Senior Member
- 62 posts
+3
Neutral
Posted 20 December 2015 - 09:36
sonic1: if you can't get a picture. Check your tuner setting:
Menu -> Setup -> Service Searching -> Tuner configuration -> Press OK on Tuner Not configured -> select now with AB left or right the original setting (Simple or Advanced) you had before the problem started todays update solved this issue.
With todays update the issue was solved on xp1000, hope this works for others to.
Thanks Jan but on Duo2 it is still broken, A = DISEqC A/B/C/D with 13,19,23 and D not configured does not work at all
Tuner B =28.2 This works
Tuner C=28.2 this was the preferred tuner and does not work.
This is after today's update.
Re: Enigma2 tuner config setting broken. #38
-
- Senior Member
- 985 posts
+20
Neutral
Posted 20 December 2015 - 10:21
Have you checked settings for Tuner A on the required sat positions 13.0, 19.2 and 23.5 that the correct lnb is used? Just in case these settings where lost? Verified settings for Tuner C.
You're certain the diseqc for Tuner A = 1.0 (A/B/C/D) and not 1.1 (Input 1, Input 2, Input 3, Input 4) ?
Sf8HD, sf8008, OpenPli 9.0, fixed lnb 28.2E, 19.2E
Re: Enigma2 tuner config setting broken. #39
-
- Senior Member
- 62 posts
+3
Neutral
Posted 20 December 2015 - 10:43
Have you checked settings for Tuner A on the required sat positions 13.0, 19.2 and 23.5 that the correct lnb is used? Just in case these settings where lost? Verified settings for Tuner C.
You're certain the diseqc for Tuner A = 1.0 (A/B/C/D) and not 1.1 (Input 1, Input 2, Input 3, Input 4) ?
It works fine on my solo4k and was fine before the update, trust me I have checked and double checked, Thanks for your reply.
Re: Enigma2 tuner config setting broken. #40
-
- Senior Member
- 4,631 posts
+225
Excellent
Posted 20 December 2015 - 11:23
It works fine on my solo4k and was fine before the update, trust me I have checked and double checked, Thanks for your reply.
But are you running Openpli on your Solo4K, I don't think your Solo4k has anything to do with this "problem"
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
