1177 replies to this topic

[Beeker]

Well. pull request to the guys of OE. GStreamer git to 1.9.0(head of today..1.9.1 is not out yet ) and stable to 1.8.0. Let's wait and see. I did my best.

[Taapat]

OE don't acept pull requests on github.

Read README.

 

You should use mailing list.
There has already is one pull request from me without answer.
This is the reason why I had not suggesting anything anymore.

[Erik Slagter]

Or use the mailing-list then?

[christophecvr]

I now have full naster-next image vuduo2.

 

gstreamer-git head (is 1.9.0)

 

Flashing stb ok.

Boot ok.

all fixed media audio/video ok

audio tested mp3,ogg,wav,wma,flac

video test avi,wmv,mp4,mpg,vob,mkv,ts  HD and non HD

all ok by me.

 

Short run about live streams did not test extented what I tested does run 100 % and smoot. (inclusif hls)

 

I tried with bbappend no luck.

 

I used the base recipes off Beeker a little adapted to my preferences and added libav.

 

Included the recipes I used

 

 

Attached Files

•  gstreamer-git-190.tar.gz   17.99KB   57 downloads

[Akki]

The best thanks Christopher, tonight it tests.

 

HLS Streams run with new GST from 1.80 without freezer with start of the Streams really.

 

With wmv files the film often stops if one with the figure keys 1-3, 4-6 and 7-9 before and jumps back.

 

This is with the GST 1.51 not the case, there I can jump before and back in the Playmodus.

 

One sees this effect then in the progress announcement, then the beam remains empty and does not fill any more, with the manual one jump.

 

Otherwise the new version GST is great

[Taapat]

And speaking out about gstreamer.
Has anyone checked whether all the plugins that are builded are actually used in the image?
Really there is not any unnecessary?
I think- maybe someone duplicates playback by the driver, or any format can not physically play in the receiver.

Or maybe we miss some plugins?

Edited by Taapat, 2 April 2016 - 18:00.

[MiLo]

OE don't acept pull requests on github.
Read README.
 
You should use mailing list.
There has already is one pull request from me without answer.
This is the reason why I had not suggesting anything anymore.

Just use the mailing list. They're quite responsive and helpful.

[christophecvr]

@Taapat

 

It's very difficult to check if a plugin should be build or not. May also depend on box and media capacity of the stb.

 

However about the double library's it's not that there are double (if it was you would see it at build time install fase two times same lib).

But indeed there are left and right some double bb packages for certain library support whereby the package name is different.

 

And example for this is the librtmp (found by MiLo)

open embedded has the same package in meta-oe but it's just called differently.

 

I now just changed in my gstreamer package bundle for 1.9.0 (git) the file

 

gstreamer1.0-plugins-bad.inc to use rtmpdump which is actually the same as librtmp but then with another name.

 

Works fine .

 

Here the corrected bundle

 

 

 

 

Attached Files

•  gstreamer-git-190-2.tar.gz   17.99KB   25 downloads

[christophecvr]

Which I did well found on vuduo2 the LCD4linux plugin does not load anymore due to missing simplejson module.

 

I did found that simplejson is build and installed on stb but into map

/usr/lib/python2.7/site-packages/simplejson-3.8.1-py2.7-linux-x86_64.egg

by coping on stb self as test the simplejson map to :

/usr/lib/python2.7/

The plugin works again as simplejson module is found.

 

How it must be solved in a correct way (not the work-araound I did) that I don't.

[Beeker]

Build with bbappends only now succesfull so far.

Add:
 

PACKAGESPLITFUNCS_append = " handle_hls_rename "

python handle_hls_rename () {
    d.setVar('RPROVIDES_gstreamer1.0-plugins-bad-hls', 'gstreamer1.0-plugins-bad-hls')
    d.setVar('RREPLACES_gstreamer1.0-plugins-bad-hls', 'gstreamer1.0-plugins-bad-hls')
    d.setVar('RCONFLICTS_gstreamer1.0-plugins-bad-hls', 'gstreamer1.0-plugins-bad-hls')
}

To the bbappend of gstreamer-plugins-bad.

Yes it doesn't make any sense on it's own, but it is needed to overwrite the obsolete code for gstreamer 1.7.1 and up, in the recipes of openembedded-core

When gstreamer is updated to 1.8 in OE-core, it can be removed.

 

[Akki]

@chris

 

I had the problem long ago already appealed, unfortunately nothing has done itself till this day, see here.

 

http://forums.openpl...nux#entry525001

 

 

From the team PLI seems to have of no one Duo2, otherwise you would have already sold short.

 

I help myself with this change in plugin.py:

 

from

 

import simplejson

to

import json as simplejson

With this change runs LCD4Linux with PLI5.

 

 

[christophecvr]

Yes upstream just uses another version off simplejson in python 2.7.

 

It is just installed at the wrong location and another way on the stb self .

 

The package bb recipes used is one off meta-oe

/meta-oe/recipes-devtools/python/python-simplejson_3.8.1.bb

Think we just should do an install append which moves the concerned modules from

/usr/lib/python2.7/site-packages/simplejson-3.8.1-py2.7-linux-x86_64.egg

to the python standards install locations used in our boxes :

/usr/lib/python2.7/site-packages/simplejson-3.8.1-py2.7.egg-info/
/usr/lib/python2.7/site-packages/simplejson/

In the egg-info map the files from egg-info

in simplejson map the pyhton module files.

[christophecvr]

I do well have a small note on the LCD4linux.

 

I personally do not use it att all since it does break the playing off dvd's (real live dvd's into usb dvd reader/writer  but also breaks some dvd.iso (or at least render they a little difficult to launch).

 

This has to do with the fact that the plugin does init pointers to early concerning video and audio into dreamdvd and or servicemp3.cpp. This may cause and does sometimes cause a enigma2 crash due to segfault or sandkeeper freeze.

This last issue is a blocker for me. But that is an error off the LCD4linux plugin writers. They should not initiate a pointer to obtain the media data but check if the pointer exists if it does use the date to show on lcd if pointer does not exist to bad not data on display.

 

This all is tricky stuff in python programming and needs I high level off expertise and ok I could determine the exact error but how to solve that's an entire other issue and for that i do not know enough off python programming.

[christophecvr]

about the simplejson what works is adding to meta-oe/recipes-devtools/python/python-simplejson_3.8.1.bb recipe :

do_install_append () {
	install -d ${D}/usr/lib/python2.7/site-packages/simplejson-3.8.1-py2.7.egg-info
	mv ${WORKDIR}/image/usr/lib/python2.7/site-packages/simplejson-3.8.1-py2.7-linux-x86_64.egg/simplejson ${WORKDIR}/image/usr/lib/python2.7/site-packages/simplejson
	mv ${WORKDIR}/image/usr/lib/python2.7/site-packages/simplejson-3.8.1-py2.7-linux-x86_64.egg/EGG-INFO/* ${WORKDIR}/image/usr/lib/python2.7/site-packages/simplejson-3.8.1-py2.7.egg-info/
	rm -rf ${WORKDIR}/image/usr/lib/python2.7/site-packages/simplejson-3.8.1-py2.7-linux-x86_64.egg
}

that should be possible with bbappend. But it works on vuduo2

[Akki]

@chris

 

I build just with your Gstreamer stack an image.

 

Unfortunately, I immediately get at the beginning this error message:

 

Build Configuration:
BB_VERSION        = "1.29.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-12.04"
TARGET_SYS        = "mipsel-oe-linux"
MACHINE           = "vuduo2"
DISTRO            = "openpli"
DISTRO_VERSION    = "5"
TUNE_FEATURES     = "o32 fpu-hard mips32"
TARGET_FPU        = ""
meta-oe           
meta-filesystems  
meta-multimedia   
meta-networking   
meta-python       = "HEAD:44f0e74954628d6a3d04fa5249dbe0c94f6dff59"
meta              = "HEAD:34e7292fb40635cee1f1237ac3156530f8dfce37"
meta-openpli      
meta-dream        = "master-next:e2b531fee0d0d6b07c518713e97cda987915a5d5"
meta-vuplus       = "HEAD:a01227dd046d6bac58801629158d8813efe8c5dc"
meta-xsarius      = "HEAD:6a3dfce2f6948e4cd854d5f1ee1dc034a09340d7"
meta-xp           = "HEAD:a76d71624dcdc6185cb75276c565fa2bace086d2"
meta-xtrend       = "HEAD:3db13416bc92c35488ffdc7885849c9433d8aa81"
meta-formuler     = "HEAD:0f5c174099e9cc7e038a4d1d9e07000df102b6ba"
meta-hd           = "HEAD:938b6a10f3360480b8b0239c2353fad4afb2b51b"
meta-xpeedc       = "HEAD:dbde5f66bb0486d72609a20e882dad0eacae8645"
meta-wetek        = "HEAD:dad4b116612c73d2cab21280500d1c2fcf54df04"
meta-zgemma       = "HEAD:d5452f6ccafd40a0e8551c34ede47d22628940fb"
meta-edision      = "HEAD:d77362ac447a2d054608ad498ac63c73a2272a8c"
meta-local        = "master-next:e2b531fee0d0d6b07c518713e97cda987915a5d5"

NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f-r0 do_fetch: Failed to fetch URL file://0001-introspection.m4-prefix-pkgconfig-paths-with-PKG_CON.patch, attempting MIRRORS if available
ERROR: gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f-r0 do_fetch: Fetcher failure: Unable to find file file://0001-introspection.m4-prefix-pkgconfig-paths-with-PKG_CON.patch anywhere. The paths that were searched were:
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f/openpli
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base/openpli
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/files/openpli
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f/vuduo2
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base/vuduo2
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/files/vuduo2
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f/mipsel
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base/mipsel
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/files/mipsel
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f/
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base/
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/files/
    /home/akki/sources
ERROR: gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f-r0 do_fetch: Function failed: Fetcher failure for URL: 'file://0001-introspection.m4-prefix-pkgconfig-paths-with-PKG_CON.patch'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/akki/openpli/openpli-oe-core/build/tmp/work/mips32el-oe-linux/gstreamer1.0-plugins-base/1.9.0.1+gitAUTOINC+a7809ecc8f-r0/temp/log.do_fetch.5862
ERROR: Task 1105 (/home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_git.bb, do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 392 tasks of which 376 didn't need to be rerun and 1 failed.
Waiting for 0 running tasks to finish:

Summary: 1 task failed:
  /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_git.bb, do_fetch
Summary: There were 8 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [image] Fehler 1
akki@akki-VirtualBox:~/openpli/openpli-oe-core$

Can you give me a tip of what it fails because?

 

Thanks

 

Greeting Akki

[christophecvr]

Thank's for repport.

 

Sorry forgot to add one map to my tar.gz.

 

Here the corrected bundle.

 

 

 

 

Attached Files

•  gstreamer-git-190-3.tar.gz   18.59KB   23 downloads

[Akki]

Sorry @chris mistake still agrees by the start indicated

akki@akki-VirtualBox:~$ cd openpli
akki@akki-VirtualBox:~/openpli$ cd openpli-oe-core
akki@akki-VirtualBox:~/openpli/openpli-oe-core$ MACHINE=vuduo2 make image
Building image for vuduo2
WARNING: Unable to get checksum for gstreamer1.0-plugins-base SRC_URI entry 0001-Makefile.am-don-t-hardcode-libtool-name-when-running.patch: file could not be found
WARNING: Unable to get checksum for gstreamer1.0-plugins-base SRC_URI entry 0003-riff-add-missing-include-directories-when-calling-in.patch: file could not be found
WARNING: Unable to get checksum for gstreamer1.0-plugins-base SRC_URI entry 0004-rtsp-drop-incorrect-reference-to-gstreamer-sdp-in-Ma.patch: file could not be found
NOTE: glibc-initial doesn't build cleanly with -Os, adding -Wno-error to SELECTED_OPTIMIZATION##########              | ETA:  00:00:05
NOTE: nativesdk-glibc-initial doesn't build cleanly with -Os, adding -Wno-error to SELECTED_OPTIMIZATION
NOTE: glibc doesn't build cleanly with -Os, adding -Wno-error to SELECTED_OPTIMIZATION
NOTE: nativesdk-glibc doesn't build cleanly with -Os, adding -Wno-error to SELECTED_OPTIMIZATION
Parsing recipes: 100% |###############################################################################################| Time: 00:00:41
Parsing of 2297 .bb files complete (0 cached, 2297 parsed). 2845 targets, 460 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION        = "1.29.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-12.04"
TARGET_SYS        = "mipsel-oe-linux"
MACHINE           = "vuduo2"
DISTRO            = "openpli"
DISTRO_VERSION    = "5"
TUNE_FEATURES     = "o32 fpu-hard mips32"
TARGET_FPU        = ""
meta-oe           
meta-filesystems  
meta-multimedia   
meta-networking   
meta-python       = "HEAD:44f0e74954628d6a3d04fa5249dbe0c94f6dff59"
meta              = "HEAD:34e7292fb40635cee1f1237ac3156530f8dfce37"
meta-openpli      
meta-dream        = "master-next:e2b531fee0d0d6b07c518713e97cda987915a5d5"
meta-vuplus       = "HEAD:a01227dd046d6bac58801629158d8813efe8c5dc"
meta-xsarius      = "HEAD:6a3dfce2f6948e4cd854d5f1ee1dc034a09340d7"
meta-xp           = "HEAD:a76d71624dcdc6185cb75276c565fa2bace086d2"
meta-xtrend       = "HEAD:3db13416bc92c35488ffdc7885849c9433d8aa81"
meta-formuler     = "HEAD:0f5c174099e9cc7e038a4d1d9e07000df102b6ba"
meta-hd           = "HEAD:938b6a10f3360480b8b0239c2353fad4afb2b51b"
meta-xpeedc       = "HEAD:dbde5f66bb0486d72609a20e882dad0eacae8645"
meta-wetek        = "HEAD:dad4b116612c73d2cab21280500d1c2fcf54df04"
meta-zgemma       = "HEAD:d5452f6ccafd40a0e8551c34ede47d22628940fb"
meta-edision      = "HEAD:d77362ac447a2d054608ad498ac63c73a2272a8c"
meta-local        = "master-next:e2b531fee0d0d6b07c518713e97cda987915a5d5"

NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f-r0 do_fetch: Failed to fetch URL file://0001-Makefile.am-don-t-hardcode-libtool-name-when-running.patch, attempting MIRRORS if available
ERROR: gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f-r0 do_fetch: Fetcher failure: Unable to find file file://0001-Makefile.am-don-t-hardcode-libtool-name-when-running.patch anywhere. The paths that were searched were:
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f/openpli
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base/openpli
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/files/openpli
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f/vuduo2
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base/vuduo2
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/files/vuduo2
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f/mipsel
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base/mipsel
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/files/mipsel
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f/
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base/
    /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/files/
    /home/akki/sources
ERROR: gstreamer1.0-plugins-base-1.9.0.1+gitAUTOINC+a7809ecc8f-r0 do_fetch: Function failed: Fetcher failure for URL: 'file://0001-Makefile.am-don-t-hardcode-libtool-name-when-running.patch'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/akki/openpli/openpli-oe-core/build/tmp/work/mips32el-oe-linux/gstreamer1.0-plugins-base/1.9.0.1+gitAUTOINC+a7809ecc8f-r0/temp/log.do_fetch.2395
ERROR: Task 1105 (/home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_git.bb, do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 434 tasks of which 391 didn't need to be rerun and 1 failed.
Waiting for 0 running tasks to finish:

Summary: 1 task failed:
  /home/akki/openpli/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_git.bb, do_fetch
Summary: There were 4 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [image] Fehler 1
akki@akki-VirtualBox:~/openpli/openpli-oe-core$

Should I remove the patch files from gstreamer1.0 plugins cousin and then build?

[christophecvr]

 

Should I remove the patch files from gstreamer1.0 plugins cousin and then build?

now just use the next corection for the time being

 

 

Attached Files

•  gstreamer-git-190-4.tar.gz   25.8KB   22 downloads

[Akki]

@chris

 

Now it fits no error message at the beginning, really work of you, thanks.

[Akki]

TV Spielfilm Plugin Youtube videos not found

 

Under PLI 5.0 no Youtube videos run in the Plugin TV Spielfilm.

 

Image built with https://github.com/O...openpli-oe-core

 

If I an image build from Taapat GIT then Youtube videos are played.

 

Can test one of the DEVs sometimes please, why no videos

 

Attached Files

•  1.jpg   57.09KB   10 downloads
•  2.jpg   135.04KB   10 downloads
•  3.jpg   33.73KB   10 downloads