1177 replies to this topic

[zeros]

Thank you!

I changed the SRCREV = "3c521817322a6bf5160cfeb09b9145ccde587b2a" -> SRCREV = "acbaf156236cbc54b3cf3bc6cbf05d80cb196451"

and I try again. About results a little later, when it ready.

[foxbob]

Error build libbluray-v0.9.3:

 

NOTE: recipe libsdl-1.2.15-r3: task do_compile: Started

NOTE: recipe libevent-2.0.22-r0: task do_compile: Started

NOTE: recipe libbluray-v0.9.3+gitAUTOINC+60e3d2600e-r0: task do_unpack: Started

ERROR: libbluray-v0.9.3+gitAUTOINC+60e3d2600e-r0 do_unpack: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-S6hErOaHrf,guid=3c10a509e073a70ec145e86058c6edab"; export SSH_AGENT_PID="1097"; export SSH_AUTH_SOCK="/tmp/ssh-WeU4edrBWxuD/agent.1037"; export PATH="/home/boris/ultimo4k/vuplus-fulan-openpli-oe-core/oe-openembedded-core/scripts:/home/boris/ultimo4k/vuplus-fulan-openpli-oe-core/build/tmp/sysroots/i686-linux/usr/bin/arm-oe-linux-gnueabi:/home/boris/ultimo4k/vuplus-fulan-openpli-oe-core/build/tmp/sysroots/vuultimo4k/usr/bin/crossscripts:/home/boris/ultimo4k/vuplus-fulan-openpli-oe-core/build/tmp/sysroots/i686-linux/usr/sbin:/home/boris/ultimo4k/vuplus-fulan-openpli-oe-core/build/tmp/sysroots/i686-linux/usr/bin:/home/boris/ultimo4k/vuplus-fulan-openpli-oe-core/build/tmp/sysroots/i686-linux/sbin:/home/boris/ultimo4k/vuplus-fulan-openpli-oe-core/build/tmp/sysroots/i686-linux/bin:/home/boris/ultimo4k/vuplus-fulan-openpli-oe-core/oe-openembedded-core/scripts:/home/boris/ultimo4k/vuplus-fulan-openpli-oe-core/oe-bitbake/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"; export HOME="/home/boris"; git -c core.fsyncobjectfiles=0 submodule update --init --recursive failed with exit code 1, output:

Submodule 'contrib/libudfread' (git://git.videolan.org/libudfread.git) registered for path 'contrib/libudfread'

 

Cloning into 'contrib/libudfread'...

fatal: read error: Connection reset by peer

Clone of 'git://git.videolan.org/libudfread.git' into submodule path 'contrib/libudfread' failed

 

ERROR: libbluray-v0.9.3+gitAUTOINC+60e3d2600e-r0 do_unpack: Function failed: base_do_unpack

ERROR: Logfile of failure stored in: /home/boris/ultimo4k/vuplus-fulan-openpli-oe-core/build/tmp/work/armv7ahf-neon-oe-linux-gnueabi/libbluray/v0.9.3+gitAUTOINC+60e3d2600e-r0/temp/log.do_unpack.1273

NOTE: recipe libbluray-v0.9.3+gitAUTOINC+60e3d2600e-r0: task do_unpack: Failed

I change recipes

- SRC_URI = "gitsm://git.videolan.org/libbluray.git"

+ SRC_URI = "gitsm://git.videolan.org/git/libbluray.git"

build ok.

[babsy98]

try again sometimes you get this info

[zeros]

Making of 5 managed today for me first time, hurray!

openpli-enigma2-5-dm7020hd.nfi :

https://www.online.e...18-86d35fa075a5

 

 

Attached Files

•  screenshot-Openpli-5.jpg   79.62KB   20 downloads
•  5-finally-all-OK.txt   3.28KB   25 downloads

[zeros]

The biggest differences, what I can see are Python version 2.7.12 and GStreamer 1.8.3.

[WanWizard]

Correct. And a different OE version. Both 4 and 5 run the same Enigma version. 

[zeros]

I will add a log for vuduo, it needs a small correction- ubinize: volume size was not specified in section "ubifs", assume minimum to fit image.

 

Attached Files

•  vuduo-NOK.txt   4.48KB   15 downloads

[WanWizard]

I think

zip: not found

is a more serious showstopper...

[bibic]

Hello,

On 99% I have an error; always the same error.

 

Initialising tasks: 100% |######################################################################################################################################| Time: 0:00:07
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: openpli-enigma2-image-1.0-r0 do_rootfs: Unable to install packages. Command '/home/openpli/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/bin/opkg --volatile-cache -f /home/openpli/openpli-oe-core/build/tmp/work/dm800se-oe-linux/openpli-enigma2-image/1.0-r0/opkg.conf -t /home/openpli/openpli-oe-core/build/tmp/work/dm800se-oe-linux/openpli-enigma2-image/1.0-r0/temp/ipktemp/ -o /home/openpli/openpli-oe-core/build/tmp/work/dm800se-oe-linux/openpli-enigma2-image/1.0-r0/rootfs  --force_postinstall --prefer-arch-to-version   install firmware-rt73 libavahi-client3 tuxbox-common enigma2-plugin-extensions-openwebif fakelocale volatile-media enigma2-plugin-systemplugins-wirelesslan tzdata kernel-module-carl9170 enigma2-plugin-systemplugins-hdmicec enigma2-plugin-systemplugins-autobouquetsmaker opkg enigma2-plugin-extensions-autobackup enigma2-plugin-systemplugins-osd3dsetup packagegroup-core-boot enigma2-plugin-systemplugins-satfinder enigma2-plugin-systemplugins-cablescan python-netifaces kernel-params enigma2-plugin-systemplugins-mountmanager enigma2-plugin-extensions-audiosync kernel-module-r8712u enigma2-plugin-softcams-oscam tuxbox-links enigma2-plugin-extensions-pictureplayer rtl8188eu enigma2-plugin-extensions-ppanel kernel-module-ath9k-htc vsftpd kernel-module-zd1211rw enigma2-plugin-extensions-xmltvimport firmware-htc7010 rtl8192cu python-pysmb nfs-utils-client e2fsprogs-e2fsck e2fsprogs-mke2fs enigma2-plugin-extensions-mediascanner enigma2-plugin-systemplugins-networkbrowser enigma2-plugin-systemplugins-hotplug enigma2-plugin-extensions-mediaplayer kernel-module-rt2500usb rtl8192eu 3rd-party-feed-configs aio-grab avahi-daemon enigma2-plugin-extensions-moviecut distro-feed-configs packagegroup-base kernel-module-rtl8187 enigma2-plugin-settings-donki-motor firmware-rtl8192cu firmware-carl9170 openpli-bootlogo enigma2 python-ipaddress firmware-zd1211 sdparm modutils-loadscript enigma2-plugin-systemplugins-fastscan settings-autorestore parted kernel-module-rt2800usb enigma2-plugin-systemplugins-softwaremanager enigma2-plugin-extensions-graphmultiepg enigma2-plugin-extensions-cutlisteditor enigma2-plugin-systemplugins-skinselector firmware-rtl8712u firmware-htc9271 enigma2-plugin-systemplugins-positionersetup dropbear enigma2-plugin-systemplugins-videomode kernel-module-rt73usb e2fsprogs-tune2fs enigma2-plugin-pli-softcamsetup enigma2-plugin-systemplugins-videotune firmware-rt2870 enigma2-plugin-systemplugins-tempfancontrol' returned 255:
Collected errors:
 * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'enigma2-plugin-pli-softcamsetup'.
 * rm_r: Failed to open dir /home/openpli/openpli-oe-core/build/tmp/work/dm800se-oe-linux/openpli-enigma2-image/1.0-r0/temp/ipktemp//opkg-BIdNiH: No such file or directory.

ERROR: openpli-enigma2-image-1.0-r0 do_rootfs: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /home/openpli/openpli-oe-core/build/tmp/work/dm800se-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_rootfs.28223
ERROR: Task (/home/openpli/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4534 tasks of which 4533 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/openpli/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_rootfs
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.

 

Thanks.

[bartoma55]

great job, guys!

 

fresh buil of master-next for my mut@ant hd51; I've to adjust only a few new versions to correctly make openpli-enigma2-feed.

I've got my goal: I'm able to play H265 mkv files (for example h**ps://vimeo.com/101129332, vimeo test file at 4096x1720).

 

openpli5 image is stable, no crash at all.

 

many, many thank to all!

[Beeker]

Perhaps it's only me, because i building dm8000 against latest openembedded-core in master, and not in morty branch.

Compilations enigma2-plugins fail due to.

sk.po:54: 'msgid' and 'msgstr' entries do not both end with '\n'
| sk.po:129: 'msgid' and 'msgstr' entries do not both end with '\n'
| sk.po:226: 'msgid' and 'msgstr' entries do not both end with '\n'

Commit:

https://github.com/O...a928bd41c08c7f8

 

So i have to remove the './n' in line 54,129 and 226 with a patch, and then everything is ok.No problem so far.

 

It has something to do with gmsgfmt/gettext. But i have no original openpli-5 build-environment at the moment. So i'm just  curious if it's only up to me.

[WanWizard]

No, these entries are incorrect, as I understand the sk po for the networkbrowser.

[zeros]

Some days I've used it with may box, and everything is very stable. How do I do this? I have installe apache2 with apt-get install apache2

I can see root@Debian:/var/www/html#

How to symlink the ipk folder there and what do I need to modify on my box? I see there a lot of plugins in the folder ipk and I want rather make the personal feed then.

 

Or install apache on your build machine and symlink /var/www/html/feeds/openpli-next to that ipk dir. You have a live personal feed then.          

 

[blzr]

if you want to try nginx instead of apache, here is a how-to:
https://forums.openp...ndpost&p=618400

[Beeker]

 

Some days I've used it with may box, and everything is very stable. How do I do this? I have installe apache2 with apt-get install apache2

I can see root@Debian:/var/www/html#

How to symlink the ipk folder there and what do I need to modify on my box? I see there a lot of plugins in the folder ipk and I want rather make the personal feed then.

 

Or install apache on your build machine and symlink /var/www/html/feeds/openpli-next to that ipk dir. You have a live personal feed then.          

 

 

In my case.

cd /var/www/html

sudo mkdir feeds

cd feeds

sudo mkdir openpli-5

cd openpli-5

sudo mkdir dm8000

cd dm8000

sudo ln -s /home/<username>/openpli-oe-core/build/tmp/deploy/ipk/dm8000 dm8000 

sudo ln -s /home/<username>/openpli-oe-core/build/tmp/deploy/ipk/all all

sudo ln -s /home/<username>/openpli-oe-core/build/tmp/deploy/ipk/mips32el mips32el

Be aware this is a example. You can adapt it to your own box(es)/path's/situation.

 

But the opkg config files must correspond with the path to the symlinks.

 

With this example. all-feed.conf for instance.

src/gz openpli-all http://<ip-adres/hostname>/feeds/openpli-5/dm8000/all

[Beeker]

No, these entries are incorrect, as I understand the sk po for the networkbrowser.

 

Yes.

[WanWizard]

patch for it has just been pushed by Tech.

[Beeker]

Thanks.

[zeros]

Tomorrow I will try your instructions, Thank you!
If my feed is set up, then I would need the box itself automatically turn to that.
So I need to reconfigure in /etc/opkg/
the all-feed.conf with

src/gz openpli-all http:///feeds/openpli-5/dm7020hd/all

Nice, it seems quite clear now.

Attached Files

•  IMG_0062.PNG   354.16KB   7 downloads
•  IMG_0063.PNG   269.58KB   8 downloads

[zeros]

Done!  :

 

root@Debian:/home/user1/openpli-oe-core/build/tmp/deploy/ipk# ls
all  dm7020hd  mips32el  Packages

 

cd /var/www/html/feeds/openpli-5/dm7020hd
root@Debian:/var/www/html/feeds/openpli-5/dm7020hd#

 

ln -s /home/user1/openpli-oe-core/build/tmp/deploy/ipk/dm7020hd dm7020hd

ln -s /home/user1/openpli-oe-core/build/tmp/deploy/ipk/all all

ln -s /home/user1/openpli-oe-core/build/tmp/deploy/ipk/mips32el mips32el

 

root@Debian:/var/www/html/feeds/openpli-5/dm7020hd# ls
all  dm7020hd  mips32el