Thank you!
I changed the SRCREV = "3c521817322a6bf5160cfeb09b9145ccde587b2a" -> SRCREV = "acbaf156236cbc54b3cf3bc6cbf05d80cb196451"
and I try again. About results a little later, when it ready.
Posted 20 March 2017 - 14:03
Thank you!
I changed the SRCREV = "3c521817322a6bf5160cfeb09b9145ccde587b2a" -> SRCREV = "acbaf156236cbc54b3cf3bc6cbf05d80cb196451"
and I try again. About results a little later, when it ready.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 20 March 2017 - 14:05
Error build libbluray-v0.9.3:
Posted 21 March 2017 - 06:03
Making of 5 managed today for me first time, hurray!
openpli-enigma2-5-dm7020hd.nfi :
https://www.online.e...18-86d35fa075a5
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 21 March 2017 - 11:50
Correct. And a different OE version. Both 4 and 5 run the same Enigma version.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 21 March 2017 - 12:15
I will add a log for vuduo, it needs a small correction- ubinize: volume size was not specified in section "ubifs", assume minimum to fit image.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 21 March 2017 - 12:28
I think
zip: not found
is a more serious showstopper...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 22 March 2017 - 13:19
Hello,
On 99% I have an error; always the same error.
Initialising tasks: 100% |######################################################################################################################################| Time: 0:00:07
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: openpli-enigma2-image-1.0-r0 do_rootfs: Unable to install packages. Command '/home/openpli/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/bin/opkg --volatile-cache -f /home/openpli/openpli-oe-core/build/tmp/work/dm800se-oe-linux/openpli-enigma2-image/1.0-r0/opkg.conf -t /home/openpli/openpli-oe-core/build/tmp/work/dm800se-oe-linux/openpli-enigma2-image/1.0-r0/temp/ipktemp/ -o /home/openpli/openpli-oe-core/build/tmp/work/dm800se-oe-linux/openpli-enigma2-image/1.0-r0/rootfs --force_postinstall --prefer-arch-to-version install firmware-rt73 libavahi-client3 tuxbox-common enigma2-plugin-extensions-openwebif fakelocale volatile-media enigma2-plugin-systemplugins-wirelesslan tzdata kernel-module-carl9170 enigma2-plugin-systemplugins-hdmicec enigma2-plugin-systemplugins-autobouquetsmaker opkg enigma2-plugin-extensions-autobackup enigma2-plugin-systemplugins-osd3dsetup packagegroup-core-boot enigma2-plugin-systemplugins-satfinder enigma2-plugin-systemplugins-cablescan python-netifaces kernel-params enigma2-plugin-systemplugins-mountmanager enigma2-plugin-extensions-audiosync kernel-module-r8712u enigma2-plugin-softcams-oscam tuxbox-links enigma2-plugin-extensions-pictureplayer rtl8188eu enigma2-plugin-extensions-ppanel kernel-module-ath9k-htc vsftpd kernel-module-zd1211rw enigma2-plugin-extensions-xmltvimport firmware-htc7010 rtl8192cu python-pysmb nfs-utils-client e2fsprogs-e2fsck e2fsprogs-mke2fs enigma2-plugin-extensions-mediascanner enigma2-plugin-systemplugins-networkbrowser enigma2-plugin-systemplugins-hotplug enigma2-plugin-extensions-mediaplayer kernel-module-rt2500usb rtl8192eu 3rd-party-feed-configs aio-grab avahi-daemon enigma2-plugin-extensions-moviecut distro-feed-configs packagegroup-base kernel-module-rtl8187 enigma2-plugin-settings-donki-motor firmware-rtl8192cu firmware-carl9170 openpli-bootlogo enigma2 python-ipaddress firmware-zd1211 sdparm modutils-loadscript enigma2-plugin-systemplugins-fastscan settings-autorestore parted kernel-module-rt2800usb enigma2-plugin-systemplugins-softwaremanager enigma2-plugin-extensions-graphmultiepg enigma2-plugin-extensions-cutlisteditor enigma2-plugin-systemplugins-skinselector firmware-rtl8712u firmware-htc9271 enigma2-plugin-systemplugins-positionersetup dropbear enigma2-plugin-systemplugins-videomode kernel-module-rt73usb e2fsprogs-tune2fs enigma2-plugin-pli-softcamsetup enigma2-plugin-systemplugins-videotune firmware-rt2870 enigma2-plugin-systemplugins-tempfancontrol' returned 255:
Collected errors:
* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'enigma2-plugin-pli-softcamsetup'.
* rm_r: Failed to open dir /home/openpli/openpli-oe-core/build/tmp/work/dm800se-oe-linux/openpli-enigma2-image/1.0-r0/temp/ipktemp//opkg-BIdNiH: No such file or directory.
ERROR: openpli-enigma2-image-1.0-r0 do_rootfs: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /home/openpli/openpli-oe-core/build/tmp/work/dm800se-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_rootfs.28223
ERROR: Task (/home/openpli/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4534 tasks of which 4533 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/openpli/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_rootfs
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
Thanks.
Posted 25 March 2017 - 12:32
great job, guys!
fresh buil of master-next for my mut@ant hd51; I've to adjust only a few new versions to correctly make openpli-enigma2-feed.
I've got my goal: I'm able to play H265 mkv files (for example h**ps://vimeo.com/101129332, vimeo test file at 4096x1720).
openpli5 image is stable, no crash at all.
many, many thank to all!
Posted 25 March 2017 - 13:44
Perhaps it's only me, because i building dm8000 against latest openembedded-core in master, and not in morty branch.
Compilations enigma2-plugins fail due to.
sk.po:54: 'msgid' and 'msgstr' entries do not both end with '\n' | sk.po:129: 'msgid' and 'msgstr' entries do not both end with '\n' | sk.po:226: 'msgid' and 'msgstr' entries do not both end with '\n'
Commit:
https://github.com/O...a928bd41c08c7f8
So i have to remove the './n' in line 54,129 and 226 with a patch, and then everything is ok.No problem so far.
It has something to do with gmsgfmt/gettext. But i have no original openpli-5 build-environment at the moment. So i'm just curious if it's only up to me.
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Posted 25 March 2017 - 14:20
No, these entries are incorrect, as I understand the sk po for the networkbrowser.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 25 March 2017 - 14:22
Some days I've used it with may box, and everything is very stable. How do I do this? I have installe apache2 with apt-get install apache2
I can see root@Debian:/var/www/html#
How to symlink the ipk folder there and what do I need to modify on my box? I see there a lot of plugins in the folder ipk and I want rather make the personal feed then.
Or install apache on your build machine and symlink /var/www/html/feeds/openpli-next to that ipk dir. You have a live personal feed then.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 25 March 2017 - 14:33
Posted 25 March 2017 - 14:35
Some days I've used it with may box, and everything is very stable. How do I do this? I have installe apache2 with apt-get install apache2
I can see root@Debian:/var/www/html#
How to symlink the ipk folder there and what do I need to modify on my box? I see there a lot of plugins in the folder ipk and I want rather make the personal feed then.
Or install apache on your build machine and symlink /var/www/html/feeds/openpli-next to that ipk dir. You have a live personal feed then.
In my case.
cd /var/www/html sudo mkdir feeds cd feeds sudo mkdir openpli-5 cd openpli-5 sudo mkdir dm8000 cd dm8000 sudo ln -s /home/<username>/openpli-oe-core/build/tmp/deploy/ipk/dm8000 dm8000 sudo ln -s /home/<username>/openpli-oe-core/build/tmp/deploy/ipk/all all sudo ln -s /home/<username>/openpli-oe-core/build/tmp/deploy/ipk/mips32el mips32el
Be aware this is a example. You can adapt it to your own box(es)/path's/situation.
But the opkg config files must correspond with the path to the symlinks.
With this example. all-feed.conf for instance.
src/gz openpli-all http://<ip-adres/hostname>/feeds/openpli-5/dm8000/all
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Posted 25 March 2017 - 15:07
patch for it has just been pushed by Tech.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 25 March 2017 - 20:59
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 25 March 2017 - 21:47
Done! :
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
0 members, 5 guests, 0 anonymous users