222 replies to this topic

[demosat1]

Hi,

News channels broadcast on 19.2E by Canalsat.

Please add on <!-- INFO Astra 19E French ...

<channel id="A+.fr">1:0:19:1F42:42E:1:C00000:0:0:0:</channel> <!-- A+ -->
<channel id="COLMAX TV.fr">1:0:19:2524:45E:1:C00000:0:0:0:</channel> <!-- COLMAX TV -->
<channel id="CAMPAGNES TV.fr">1:0:19:24C2:43C:1:C00000:0:0:0:</channel> <!-- CAMPAGNES TV -->
<channel id="SUNDANCE CHANNEL.fr">1:0:19:213D:400:1:C00000:0:0:0:</channel> <!-- SUNDANCE CHANNEL -->

Thanks

[doglover]

Added.

 

Willy

[demosat1]

Thanks Willy.

 

Now remove all France region, broadcast is finish on 19.2E

 

Delete:

<channel id="France3Basse-Normandie.fr">1:0:1:2649:460:1:C00000:0:0:0:</channel> <!-- F3 BNORMANDIE -->
<channel id="France3PaysDeLaLoire.fr">1:0:1:264A:460:1:C00000:0:0:0:</channel> <!-- F3 PAYS DE LOIRE -->
<channel id="France3CotedAzur.fr">1:0:1:264B:460:1:C00000:0:0:0:</channel> <!-- F3 COTE D'AZUR -->
<channel id="France3Centre.fr">1:0:1:264C:460:1:C00000:0:0:0:</channel> <!-- F3 CENTRE -->
<channel id="France3Bourgogne.fr">1:0:1:264D:460:1:C00000:0:0:0:</channel> <!-- F3 BOURGOGNE -->
<channel id="France3Poitou-Charentes.fr">1:0:1:264E:460:1:C00000:0:0:0:</channel> <!-- F3 POITOUCHAR -->
<channel id="France3Champagne-Ardenne.fr">1:0:1:264F:460:1:C00000:0:0:0:</channel> <!-- F3 CHAMP ARDENNE -->
<channel id="France3Alpes.fr">1:0:1:2650:460:1:C00000:0:0:0:</channel> <!-- F3 ALPES -->
<channel id="France3Nord-PasDeCalais.fr">1:0:1:2651:460:1:C00000:0:0:0:</channel> <!-- F3 NORD PDC -->
<channel id="France3Alsace.fr">1:0:1:2652:460:1:C00000:0:0:0:</channel> <!-- F3 ALSACE -->
<channel id="France3Languedoc.fr">1:0:1:2653:460:1:C00000:0:0:0:</channel> <!-- F3 LANGUEDOCROU -->
<channel id="France3Corse.fr">1:0:1:2654:460:1:C00000:0:0:0:</channel> <!-- F3 CORSEVIASTELL -->
<channel id="France3Aquitaine.fr">1:0:1:2657:460:1:C00000:0:0:0:</channel> <!-- France 3 (Aquitaine) -->
<channel id="France3Auvergne.fr">1:0:1:2658:460:1:C00000:0:0:0:</channel> <!-- France 3 (Auvergne) -->
<channel id="France3Bretagne.fr">1:0:1:2659:460:1:C00000:0:0:0:</channel> <!-- France 3 (Bretagne) -->
<channel id="France3Franche-Comte.fr">1:0:1:2660:460:1:C00000:0:0:0:</channel> <!-- France 3 (Franche Comte) -->
<channel id="France3Haute-Normandie.fr">1:0:1:2656:460:1:C00000:0:0:0:</channel> <!-- France 3 (Haute normandie) -->
<channel id="France3Limousin.fr">1:0:1:265A:460:1:C00000:0:0:0:</channel> <!-- France 3 (Limousin) -->
<channel id="France3Lorraine.fr">1:0:1:265B:460:1:C00000:0:0:0:</channel> <!-- France 3 (Lorraine) -->
<channel id="France3Midi-Pyrenees.fr">1:0:1:265C:460:1:C00000:0:0:0:</channel> <!-- France 3 (Midi Pyrénées) -->
<channel id="France3Paris-IdF.fr">1:0:1:265D:460:1:C00000:0:0:0:</channel> <!-- France 3 (Paris IDF) -->
<channel id="France3Picardie.fr">1:0:1:265E:460:1:C00000:0:0:0:</channel> <!-- France 3 (Picardie) -->
<channel id="France3Provence-Alpes.fr">1:0:1:2655:460:1:C00000:0:0:0:</channel> <!-- France 3 (Provence Alpes) -->
<channel id="France3Rhone-Alpes.fr">1:0:1:265F:460:1:C00000:0:0:0:</channel> <!-- France 3 (Rhones Alpes) -->

[oxejatte]

France Régions channels are still broadcasted just differents sids

You can find them on 11856 V, 27500, 3/4

[demosat1]

Plan de fréquence TNTSAT.

Read "Nota Benne"  last page

NB : La diffusion des FR3 régions SD est remplacée par FR3 national

NB: The broadcast of FR3 regions SD is replaced by national FR3

Edited by demosat1, 9 February 2016 - 15:01.

[Amai]

FR3 régions channels will not be removed from "19.2°E 12728 V 22000 2/3 8PSK DVB-S2"

 

FR3 régions channels on "19.2°E 11856 V 27500 3/4" will be deleted
and FRANCE 3 will stay on this frequency as replacement for the removed FR3 regions.

[Amai]

frequency change for:

 

Cherie 25
1:0:1:2F6D:454:1:C00000:0:0:0
1:0:1:2F6C:454:1:C00000:0:0:0

 

BFM BUSINESS
1:0:1:206F:432:1:C00000:0:0:0

[Amai]

BFM BUSINESS
1:0:1:206F:432:1:C00000:0:0:0

= HD

[demosat1]

Please move
<channel id="Nickelodeon.fr">1:0:1:1F48:42E:1:C00000:0:0:0:</channel> <!-- NICKELODEON France -->
on
<channel id="Nickelodeon.fr">1:0:19:1F48:42E:1:C00000:0:0:0:</channel> <!-- NICKELODEON France -->

Check, no grab
<channel id="MCMtop.fr">1:0:19:219B:448:1:C00000:0:0:0:</channel> <!-- MCM TOP HD-->

Add
<channel id="AB3.be">1:0:16:3202:45F:35:C00000:0:0:0:</channel> <!-- AB3 -->
<channel id="BFMBusiness.fr">1:0:19:206F:432:1:C00000:0:0:0:</channel> <!-- BFM Business -->

 

Thanks
 

[doglover]

Check, no grab
<channel id="MCMtop.fr">1:0:19:219B:448:1:C00000:0:0:0:</channel> <!-- MCM TOP HD-->

 

 

 

Yes, there is a grab, but very limited.

Will see if I can get anything better.

 

Willy

[zazo]

Hello everyone,

Would you please send me an exhuative list of all tv channels of CanalSat France.

Appreciate your help

[wile_e]

Hello Willy,

since the time change last Sunday, EPG remains double on some French channels (e.g TF1, France 2, France 3). Programs are double : once with the reight schedule and a second time one hour ahead. For instance "Le 13 heures", TF1's mid-day news are scheduled at 1pm and also on 2pm. This double schedule is shown until Friday April 1st in the evening. From Saturday April 2nd on, it is normal.

I did a manual EPG update, nothing changed.

My receiver shows the right time.

All other sources (EIT, etc) are set to "No"

 

Could you please check and remove the double entries?

 

Thanks,

David

[doglover]

Yes.  (this is caused by the DST change)

 

Solution is simple.  Delete all EPG in your box (see the FAQ's)  and reimport.

 

Willy

[wile_e]

I deleted the 2 files epg.dat (dates were from Nov 2015 and March 2016, that's odd; no other epg.dat files elsewhere). I did a manual epg import ---> no changes, epg is still double.

I seemed to install systemtools. Systemtools does not show up in the plugin list (also after a OpenPLI restart) and is not in the list of the available plugins anymore. Where the hell is it? No clue.

So, I must admit that nothing works (or am I just too stupid?) and will simply give up on this and be patient for the next 8 hours. 

[doglover]

Why don't you read our FAQ's:

 

* How to erase all epg in your box

Install Systemtools. One of the options is erase epg.

The second method is the manual one. I use the program DCC to do this but you also can use Putty or even a simple Telnet session in Windows.

Open a Telnet session to the IP address of your satellite receiver (in most cases Dreambox or Vu).

When you are prompted you can type behind the prompt #

 

init 4

 

(This will stop Enigma of working and if you were watching TV it will freeze.)

What I do extra is open a FTP session (in DCC you can switch easy to this) and then go to /tmp and see if there is maybe a file epg.dat, remove it and then go also to /media/hdd if you have a harddisk installed in your receiver and also check if maybe a fil epg.dat is there and remove it. Check also /media/usb
(This step is not always needed but I do it and it does not take a lot of time)

 

Erase also the Crossepg database.  It is usually on your HDD in a folder Crossepg.

It has a .db extension.  This is needed because Crossepg stores EPG in this database, and they stay there until it expires, or you delete the database.

If you do not erase this database Crossepg will load the faulty EPG over and over. 

Problem is that faulty EPG is not overwritten by the good EPG.  It is only overwritten if the starttime is exactly the same.

 

Now go back to the Telnet session and behind the prompt type #

 

init 3

 

(This will start Enigma again and after a while you will notice the screen will play again (if you were watching TV).

After this the EPG listings should be empty or only show Now/Next in the infobar, depending on how you have setup the EIT and EPG settings in the system menu.
(keep in mind if you have enabled MHW, EIT, etc then EPG listings will not be empty if you zap to those channels)

 

Willy

[wile_e]

Why don't you read our FAQ's: I did!!

 

* How to erase all epg in your box

Install Systemtools.

As I said, I installed it but it does not appear anywhere.

One of the options is erase epg.

 

The second method is the manual one. I use the program DCC to do this but you also can use Putty or even a simple Telnet session in Windows.

So, let's do this second method :

Open a Telnet session to the IP address of your satellite receiver (in most cases Dreambox or Vu).

Yeah, 192.168.178.35

When you are prompted you can type behind the prompt #

 

init 4

That's OK

(This will stop Enigma of working and if you were watching TV it will freeze.)

What I do extra is open a FTP session (in DCC you can switch easy to this) and then go to /tmp and see if there is maybe a file epg.dat

No, there is no such file there

, remove it and then go also to /media/hdd if you have a harddisk installed in your receiver and also check if maybe a fil epg.dat is there and remove it

OK, there we have one dated April 1st 17h06

. Check also /media/usb
(This step is not always needed but I do it and it does not take a lot of time)

There aren't any usb devices connected

Erase also the Crossepg database.  It is usually on your HDD in a folder Crossepg.

It has a .db extension.  This is needed because Crossepg stores EPG in this database, and they stay there until it expires, or you delete the database.

If you do not erase this database Crossepg will load the faulty EPG over and over. 

Problem is that faulty EPG is not overwritten by the good EPG.  It is only overwritten if the starttime is exactly the same.

I don't have crossepg. I don't like it.

Now go back to the Telnet session and behind the prompt type #

 

init 3

 

(This will start Enigma again and after a while you will notice the screen will play again (if you were watching TV).

OK so far

After this the EPG listings should be empty or only show Now/Next in the infobar, depending on how you have setup the EIT and EPG settings in the system menu.
(keep in mind if you have enabled MHW, EIT, etc then EPG listings will not be empty if you zap to those channels)

So, EPG is gone. Manual import is on its way. So, it's now done and OK

I have deleted the epg.dat file earlier but without init 4 and init 3. Is there a reason why it's so important?

Willy

[doglover]

I have deleted the epg.dat file earlier but without init 4 and init 3. Is there a reason why it's so important?

 

 

 

Yes, there is.  The epg.dat is recreated when you shut down or restart your receiver in the normal way.

To avoid this enigma has to killed.  In this way it does not recreate epg.dat

 

And if you really read the FAQ's you should have seen this:

 

* What is the purpose of epg.dat

 

The epg.dat file is commonly seen as the vehicle for XMLTV.

This is a misconception.  The epg.dat is a file from enigma, in which the epg is stored when the enigma is stopped or the receiver is shut down.  Upon restart this file is read again in memory to restore the epg.

 

Willy

[wile_e]

Thanks for the explanation, Willy.

 

Another story, due to last night changes on Fransat, EPG is missing for some channels :

 

France 3 HD #SERVICE 1:0:1:110:1:20FA:DDE0000:0:0:0:

France 4 HD #SERVICE 1:0:1:104:1:20FA:DDE0000:0:0:0:

France Ô HD #SERVICE 1:0:1:105:1:20FA:DDE0000:0:0:0:

 

And there is no EPG on Trek on Hotbird 13°east (this has nothing to do with the Fransat changes)

Trek #SERVICE 1:0:1:1CA:26AC:13F:820000:0:0:0:

 

Best regards,

David

[wile_e]

Missing EPG on changed France 3 regional stations on Eutelsat 5°W

 

France 3 Amiens #SERVICE 1:0:1:1001:5014:55F:DDE0000:0:0:0:

France 3 Bordeaux #SERVICE 1:0:1:1003:5078:55F:DDE0000:0:0:0:

France 3 Lille #SERVICE 1:0:1:1008:5014:55F:DDE0000:0:0:0:

France 3 Limoges #SERVICE 1:0:1:1009:5078:55F:DDE0000:0:0:0:

France 3 Nantes #SERVICE 1:0:1:1014:5078:55F:DDE0000:0:0:0:

France 3 Reims #SERVICE 1:0:1:1019:5014:55F:DDE0000:0:0:0:

France 3 Rennes #SERVICE 1:0:1:1020:5078:55F:DDE0000:0:0:0:

France 3 Strasbourg #SERVICE 1:0:1:1022:5014:55F:DDE0000:0:0:0:

[doglover]

Added.

 

Willy