SAT>IP for OpenPli?
#1
Posted 20 February 2016 - 12:35
I just bought a Sat>ip server for my network und I just found out, that a Sat>ip plugin is not in the feed.
Am I missing something, is Openpli not comparible with it or can I just download the plugin from aother feed?
I realize that remotestreamconvert plugin was once recommended for that, but I want to get the sat>ip as an additional tuner so remotestreamconvert is ruled out.
Can anyone help me on this one?
TIA
Umtauscher
Re: SAT>IP for OpenPli? #2
Re: SAT>IP for OpenPli? #3
Posted 24 February 2016 - 16:52
Someone needs to fork the code, compile it, test it, which is a bit difficult if you have nothing to test with...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: SAT>IP for OpenPli? #4
Posted 24 February 2016 - 16:52
Actually both a SAT>IP client and server have been in the feed for some time now.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: SAT>IP for OpenPli? #5
Posted 24 February 2016 - 16:55
Ah, didn't know that. So, no issue then.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: SAT>IP for OpenPli? #6
Posted 24 February 2016 - 16:57
I didn't understood the fuss anyway.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: SAT>IP for OpenPli? #7
Re: SAT>IP for OpenPli? #8
Re: SAT>IP for OpenPli? #9
Posted 24 February 2016 - 19:50
There is no graphical plugin to setup the client, you need to configure it from the command line.
For example, this is how I start the client:
satip-client -s 192.168.0.10 -t 0 &
where 192.168.0.10 is the SAT>IP server and -t 0 means DVB-S2.
Edited by mrbeam, 24 February 2016 - 19:54.
Wavefrontier T90, Vu+ Duo 4k SE (DVB-S2x FBC, DVB-T2, DVB-C USB), Octagon SF4008 (dual DVB-S2, DVB-T2 & DVB-C USB), Mutant HD51 (DVB-S2 & DVB-T2), TBS6920 & TBS6925
Re: SAT>IP for OpenPli? #10
Re: SAT>IP for OpenPli? #11
Posted 24 February 2016 - 20:20
That did the trick:
Wavefrontier T90, Vu+ Duo 4k SE (DVB-S2x FBC, DVB-T2, DVB-C USB), Octagon SF4008 (dual DVB-S2, DVB-T2 & DVB-C USB), Mutant HD51 (DVB-S2 & DVB-T2), TBS6920 & TBS6925
Re: SAT>IP for OpenPli? #12
Posted 8 March 2016 - 19:28
Today I searched the plugins again and I found that a satip-client plugin is available.
I installed it and it found the satip server on my network.
After I configured the vtuners on my vuplus duo the STB prompted for a restart.
Unfortunately after that there where nor additional Tuners in the tuner setting.
What am I missing? Is it not yet functional?
BTW my vuplus solo2 showed 4 vtuners which I could connect to my satip server. After the resart no new tuners either.
I simply cant get it to work.
Any help is greatly appreciated.
TIA
Umtauscher
Re: SAT>IP for OpenPli? #13
Posted 9 March 2016 - 08:51
Well, what am I missing?
Today I searched the plugins again and I found that a satip-client plugin is available.
I installed it and it found the satip server on my network.
After I configured the vtuners on my vuplus duo the STB prompted for a restart.
Unfortunately after that there where nor additional Tuners in the tuner setting.
What am I missing? Is it not yet functional?
BTW my vuplus solo2 showed 4 vtuners which I could connect to my satip server. After the resart no new tuners either.
I simply cant get it to work.
Any help is greatly appreciated.
TIA
Umtauscher
Please save setup
and
in telnet
cat /etc/vtuner.conf
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: SAT>IP for OpenPli? #14
Posted 9 March 2016 - 15:04
here you go:
This is the vtuner.conf from the solo2
0=desc:EXIP-414/E,ipaddr:192.168.1.95,tuner_type:DVB-S,uuid:00000000-0000-1000-a2c0-00d0551c4eb,vtuner_type:satip_client
1=desc:EXIP-414/E,ipaddr:192.168.1.95,tuner_type:DVB-S,uuid:00000000-0000-1000-a2c0-00d0551c4eb,vtuner_type:satip_client
2=vtuner_type:usb_tuner
3=vtuner_type:usb_tuner
Edited by umtauscher, 9 March 2016 - 15:05.
Re: SAT>IP for OpenPli? #15
Re: SAT>IP for OpenPli? #16
Posted 10 March 2016 - 08:09
There is a plugin that does all the configuration and the client chooses to ignore it? I am greatful for your hint.
When I start the satipclient nothing happens either.
When do you suppose it should be started?
Forgive me, but since when is a STB something that needs to be configured form a linux shell?
I would define this as simply not functioning.
Sorry.
Umtauscher
Re: SAT>IP for OpenPli? #17
Posted 10 March 2016 - 08:12
Since the enigma2 plugin is now in the feed, I would suggest to also use the oe-alliance satip-client, which is compatible with that plugin.
Erik's work was just a proof of concept. If you want to use it, you should make an init script. satip-client should run before enigma2 starts.
It is functioning, it is just not user friendly. I would call it "hacker friendly" as it is. But it does function, I personally use it.
Re: SAT>IP for OpenPli? #18
Posted 10 March 2016 - 08:23
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: SAT>IP for OpenPli? #19
Posted 10 March 2016 - 10:01
Since the enigma2 plugin is now in the feed, I would suggest to also use the oe-alliance satip-client, which is compatible with that plugin.
Erik's work was just a proof of concept. If you want to use it, you should make an init script. satip-client should run before enigma2 starts.
It is functioning, it is just not user friendly. I would call it "hacker friendly" as it is. But it does function, I personally use it.
Thanks, I can understand proof of concept.
I will try tonight and hope since the UI is already in place it's not so difficult to make the satipclient compatible with the config file.
Thanks again
Umtauscher
Re: SAT>IP for OpenPli? #20
Posted 10 March 2016 - 12:45
And as the proof of concept was quite disappointing (as you will learn as well), I stopped working on it. Beside the UI it's complete though. And I didn't write it, I just adapted it.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
6 user(s) are reading this topic
0 members, 6 guests, 0 anonymous users