36 replies to this topic

[umtauscher]

Hi Erik,

 

thanks, I'vo got it working now.

What was so disappointing for you?

 

What is odd though is that I cannot decode SKY when coming via vtuner.

HD+ works fine. Both are decoded by the same card. ?!?

 

Thanks

Umtauscher

[Erik Slagter]

The problem is that buffering comes very tight, every little delay gives artifacts in the picture. Also the quality of the vtuner implementation various a lot between manufacturers, some to the extend that sound is often unusable. Last but not least, if used as a means to connect two enigma-receivers, it's a suboptimal concept, the internal mechanism of enigma works better and is more flexible.

[umtauscher]

I can see some of the problems you are describing.
On the vu+ duo it is totally unusable. I don't know if its the drivers or the inferiour hardware. I get tone problems and freezes of the picture. On the solo2 it's nearly as good as a built in tuner.

The goal was to have some centralized tuners, that can be shared between stbs and mobile devices.

I agree there are hickups but I think they are on the client side, because I get very different results on the various devices.
Thanks again

[Hoerbi1000]

Are there any News?
I would also happy if this is working

[umtauscher]

Well this is a fairly old thread.
I can tell you it's working nearly perfect on the solo2 since 6.1
Unfortunately not so much on the duo2.

[iceball09]

Hello,

 

today i install openPLI 6.2 on Formuler F1. I install the satoveripclient addon. I dont see the vtuner to. 

What i have now to do?

 

Greetings

[idomonkos]

Is the satip client working in the latest openpli 7.2 on UNO4KSE?

root@vuuno4kse:~# satipclient -s 192.168.0.10 -t 0 &
[1]-  Done(127)                  satip-client -s 192.168.0.10 -t 0
root@vuuno4kse:~# satipclient: invalid option -- 's'
Usage: satip-client <options>
       -m <debug_mask>      Used for debugging, see code
       -l <log_level>       Log level: (default: 1)
                               0: None
                               1: Error
                               2: Warning
                               3: Info
                               4: Debug
       -y                   Use syslog instead of STDERR for logging
       -h                   Print help

[WanWizard]

The satipclient is a daemon, which runs via an init script. You can't start it like that.

[idomonkos]

So how can I configure it if it does not detect my tvheadend server?

[WanWizard]

You can't use the daemon on its own. It should be used together with the SatIP systemplugin, which is the frontend.

[idomonkos]

Never mind, It finally found my tvheadend server after I installed the DVBViewer media server on another pc. Magically both of them appeared. Now I only have to figure out how to scan the channels.

[WanWizard]

It should create an additional tuner, so you scan like you would with any other tuner.

[idomonkos]

The tuners are created, but the scan can't find anything and this is added to the log:

Jan 20 23:01:58 vuuno4kse user.warn kernel: [  841.348552] BRCM brcm_dvb0: DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver
Jan 20 23:02:05 vuuno4kse user.warn kernel: [  847.893119] BRCM brcm_dvb0: DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver
Jan 20 23:02:10 vuuno4kse user.warn kernel: [  852.843293] BRCM brcm_dvb0: DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver
Jan 20 23:02:15 vuuno4kse user.warn kernel: [  857.843892] BRCM brcm_dvb0: DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver

[betacentauri]

Try to use channel list from feed and don’t use scan.

[Abu Baniaz]

Is there a tutorial on how to use this?

Sent from my Moto G (5S) using Forum Fiend v1.3.3.

[idomonkos]

I want to use it for dvb-t and dvb-c.

[idomonkos]

I want to use it for dvb-t and dvb-c.

 

Update: with minisatip as a server everything works, I can scan the channels, too.