9 replies to this topic

[viagra99]

Good Morning,

I'm trying to load the last img (yesterday) on my ET9X00 and when launching the dvb-usb-em28xx driver goes wrong, "Collected errors":

opkg_install_pkg: Package kernel-module-em28xx-dvb md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'.

opkg_install_cmd: Cannot install package enigma2-plugin-drivers-dvb-usb-em28xx.

I tried to telnet to type the following commands as suggested by someone but to no avail.

Can you help me, thanks, Mauro

[zeros]

Hi,
The same stick I have and works with dreambox very well. PCTV-290e + drivers dvb-usb-em28xx (1.0-r0.0) + DM7020 HD
Just for info.

Edited by zeros, 19 March 2016 - 07:17.

[bloke76]

hi all,

 

i have the same problem when installing the new opticombo dvb driver, which has been added recently on the feeds, same errors and not available via telnet opkg install

 

if anyone has a solution for this... much appreciated.

 

many thanks

bloke

[viagra99]

ok,  with the img of yesterday (OpenPLi-4.0-beta-et9x00-20160318_usb.zip) the driver now works.

Thanks a lot, Mauro

[viagra99]

Good evening,

 

I'm here to write that my nanostick dvb T2 290E, with the drivers em28xx downloaded from the site, with the latest image Openpli 6.2 kernel 3.8.7 does not work or better at the beginning works then after a while it crashes, I have also tried with the 1.0.4r rel drivers I had but the problem is the same. I then tried to uninstall them but the operation is not performed correctly. What can I do? Is there anyone who can help me?

 

Thanks a lot Mauro

[zeros]

What a box you have?
The secret is that the image must have the same ranking as on feed the plugin have. Try to reinstall/Flash the last image and then from feed the dvb-usb-em28xx. Or did you just do that?

[Pr2]

Hi,

 

If you are still using your ET9x00 I had many bad feedback from the latest drivers included into OpenPLi 6.2 (the one that remove the SecurityBoard check) many people complaints about unexpected crashed and go back to OpenPLi 6.1

 

Pr2

[Robinson]

many people complaints about unexpected crashed and go back to OpenPLi 6.1

 That is a pity.

[viagra99]

Thanks, I try with OpenPli 6.1, and I'll let you know

[viagra99]

Hi,

 

I did a lot of tests with versions 4.0, 6.1 and 6.2 but all of them gave me problems mainly with the driver EM28xx (pctv 290e) unfortunately in the end I had to go back to the image 4.0, but also in this in the Satfinder the Agc ( 0%) and the Ber (33280) on some frequencies are to be investigated.

 

I also tried to load the image 6.2 leaving the settings of 4.0, but obviously this driver was not compatible as the version was also changed.

 

I loaded the 6.1 but this also gave me problems with both the driver and the color management system plugin (VideoEnhancement)

 

Is there any way to continue using this pen or should I throw it and take a pctv 292e that has a specific driver updated?

Thanks Mauro

Edited by WanWizard, 24 September 2018 - 12:23.
fixed formatting