Jump to content


Photo

GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner

Started by Marchella, 08 Apr 2016 18:00

  • Please log in to reply
31 replies to this topic

#1 Marchella

  • Senior Member
  • 121 posts

+1
Neutral

Posted 8 April 2016 - 18:00

 
Hi , guys please help , I have GENIATECH MyGica USB TV Stick T230 / T220A DVB-T2 Tuner if the support of the stick on the image OpenPli, if it really help any driver you need to install ....

[H[Jroot@vusolo4k:~# [6n
uname -a
Linux vusolo4k 3.14.28-1.8 #1 SMP Sat Mar 26 05:58:50 CET 2016 armv7l GNU/Linux
root@vusolo4k:~# [6n
lsusb
Bus 004 Device 002: ID 0572:c688
Bus 005 Device 002: ID 148f:5372
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0002
Bus 006 Device 001: ID 1d6b:0002
Bus 007 Device 001: ID 1d6b:0001
Bus 008 Device 001: ID 1d6b:0001
Bus 009 Device 001: ID 1d6b:0001
Bus 010 Device 001: ID 1d6b:0001
root@vusolo4k:~# [6n

 


LG 55UJ630V 4K UHD > Yandex Duo Max & Zgemma H7 S 4K UHD

 
Samsung QE55Q60A 4K UHD > Yandex Max & Zgemma H9 Twin 4K UHD <> LCD4linux met Samsung SPF 87H

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #2 ColinB

  • Senior Member
  • 743 posts

+28
Good

Posted 8 April 2016 - 18:46

Do you have dmesg to show?

 

http://linuxtv.org/w.../Geniatech_T230


Edited by ColinB, 8 April 2016 - 18:51.

Xtrend et8000 7.1-Release

2 x 8/1 DiSEqC  30w 13e 19e 23e 28e   

Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+  ;)

WD10EARX 1TB

Sandisk 32GB USB for AFB, EPG, Picons & Timeshift

 

ZGemma Star S 7.0-Release

4/1 DiSEqC  30w 13e 19e 28e

Sandisk 8GB USB for AFB, EPG, Picons & Timeshift

 

LG 49UH610V UHD-HDR

UHF/Cable/Sat

 

E-Channelizer

 

 

 

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #3 Marchella

  • Senior Member
  • 121 posts

+1
Neutral

Posted 8 April 2016 - 18:58

ColinB

root@vusolo4k:~# [6n
dmesg


[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.28-1.8 (build@buildserver) (gcc version 4.9.1 (GCC) ) #1 SMP Sat Mar 26 05:58:50 CET 2016
[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: BCM97366SFF_bad_MoCA
[ 0.000000] moving dtb from 0x000000000761c000 to 0x0000000000822554
[ 0.000000] cma: Reserved 504 MiB at 0x0000000010000000
[ 0.000000] cma: Reserved 260 MiB at 0x000000002f800000
[ 0.000000] cma: Reserved 1024 MiB at 0x0000000080000000
[ 0.000000] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] free_area_init_node: node 0, pgdat c07e77c0, node_mem_map cd6f6000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4624 pages used for memmap
[ 0.000000] HighMem zone: 329728 pages, LIFO batch:31
[ 0.000000] MCP: Write pairing already disabled
[ 0.000000] PERCPU: Embedded 8 pages/cpu @cd6c3000 s8768 r8192 d15808 u32768
[ 0.000000] pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
[ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootwait rw rootflags=data=journal debug coherent_pool=2M brcm_cma=504M@0x10000000 brcm_cma=260M@0x2f800000 brcm_cma=1024M@0x80000000
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 218968K/2097152K available (5732K kernel code, 330K rwdata, 1792K rodata, 248K init, 183K bss, 30888K reser
ved, 1847296K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07612f0 (7525 kB)
[ 0.000000] .init : 0xc0762000 - 0xc07a0240 ( 249 kB)
[ 0.000000] .data : 0xc07a2000 - 0xc07f48f0 ( 331 kB)
[ 0.000000] .bss : 0xc07f48f8 - 0xc0822554 ( 184 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 95)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc441000, parent irq: 74)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 97)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 57)
[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
[ 0.000005] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
[ 0.000011] Switching to timer-based delay loop
[ 0.000276] Console: colour dummy device 80x30
[ 0.000296] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
[ 0.000304] pid_max: default: 32768 minimum: 301
[ 0.000407] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006224] CPU: Testing write buffer coherency: ok
[ 0.006437] CPU0: update cpu_power 1024
[ 0.006446] CPU0: thread -1
, cpu 0, socket 0, mpidr 80000000
[ 0.006501] Setting up static identity map for 0x5746f0 - 0x574748
[ 0.009274] CPU1: Booted secondary processor
[ 0.009298] CPU1: update cpu_power 1024
[ 0.009302] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.009379] Brought up 2 CPUs
[ 0.009391] SMP: Total of 2 processors activated.
[ 0.009397] CPU: All CPU(s) started in SVC mode.
[ 0.009772] devtmpfs: initialized
[ 0.013718] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[ 0.043317] regulator-dummy: no parameters
[ 0.043532] NET: Registered protocol family 16
[ 0.046046] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.046948] cpuidle: using governor ladder
[ 0.046954] cpuidle: using governor menu
[ 0.048933] irq: no irq domain found for /rdb/interrupt-controller@f040a580 !
[ 0.049099] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !
[ 0.052656] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf040452f] registered
[ 0.052840] syscon f0442400.syscon: regmap [mem 0xf0442400-0xf04427ff] registered
[ 0.052997] syscon f0462000.syscon: regmap [mem 0xf0462000-0xf04620ff] registered
[ 0.053153] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf0404157] registered
[ 0.053310] syscon f0404158.syscon: regmap [mem 0xf0404158-0xf040418f] registered
[ 0.053480] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070f] registered
[ 0.053631] syscon f0410710.syscon: regmap [mem 0xf0410710-0xf0410717] registered
[ 0.053785] syscon f0501004.syscon: regmap [mem 0xf0501004-0xf0501403] registered
[ 0.053940] syscon f0901004.syscon: regmap [mem 0xf0901004-0xf0901403] registered
[ 0.054093] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
[ 0.054246] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
[ 0.054389] syscon f0440154.syscon: regmap [mem 0xf0440154-0xf0440157] registered
[ 0.054531] syscon f0440354.syscon: regmap [mem
0xf0440354-0xf0440357] registered
[ 0.054681] syscon f0440400.syscon: regmap [mem 0xf0440400-0xf0440403] registered
[ 0.055468] No ATAGs?
[ 0.055490] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.055495] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.156053] brcm-pci f0470000.pcie: link down
[ 0.172464] bio: create slab at 0
[ 0.173279] SCSI subsystem initialized
[ 0.173519] libata version 3.00 loaded.
[ 0.173981] usbcore: registered new interface driver usbfs
[ 0.174069] usbcore: registered new interface driver hub
[ 0.174180] usbcore: registered new device driver usb
[ 0.174326] Linux video capture interface: v2.00
[ 0.174581] pps_core: LinuxPPS API ver. 1 registered
[ 0.174586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.174651] PTP clock support registered
[ 0.175318] Advanced Linux Sound Architecture Driver Initialized.
[ 0.176190] cfg80211: Calling CRDA to update world regulatory domain
[ 0.176634] Switched to clocksource arch_sys_counter
[ 0.176841] FS-Cache: Loaded
[ 0.187156] thermal thermal_zone0: failed to read out thermal zone 0
[ 0.187256] NET: Registered protocol family 2
[ 0.187714] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.187759] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.187842] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.187928] TCP: reno registered
[ 0.187936] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.187961] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.188095] NET: Registered protocol family 1
[ 0.188307] RPC: Registered named UNIX socket transport module.
[ 0.188313] RPC: Registered udp transport module.
[ 0.188317] RPC: Registered tcp transport module.
[ 0.188321] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.188329] PCI: CLS 0 bytes, default 64
[ 0.188
645] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
[ 0.189921] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.199483] bounce pool size: 64 pages
[ 0.200040] NFS: Registering the id_resolver key type
[ 0.200078] Key type id_resolver registered
[ 0.200082] Key type id_legacy registered
[ 0.200094] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.200099] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.200555] fuse init (API version 7.22)
[ 0.200731] msgmni has been set to 1467
[ 0.201552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.201561] io scheduler noop registered
[ 0.201566] io scheduler deadline registered
[ 0.201586] io scheduler cfq registered (default)
[ 0.201870] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 259, 260
[ 0.202436] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
[ 0.203056] brcm-cma brcm-cma.0: Added CMA device @ PA=0x10000000 LEN=0x1f800000
[ 0.221984] brcm-cma brcm-cma.0: Pre-allocated 0x1f800000 bytes @ 0x10000000
[ 0.222697] brcm-cma brcm-cma.1: Added CMA device @ PA=0x2f800000 LEN=0x10400000
[ 0.232370] brcm-cma brcm-cma.1: Pre-allocated 0x10400000 bytes @ 0x2f800000
[ 0.233052] brcm-cma brcm-cma.2: Added CMA device @ PA=0x80000000 LEN=0x40000000
[ 0.267539] brcm-cma brcm-cma.2: Pre-allocated 0x40000000 bytes @ 0x80000000
[ 0.268163] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.269910] f040b000.serial: ttyS0 at MMIO 0xf040b000 (irq = 108, base_baud = 5062500) is a 16550A
[ 1.128183] console [ttyS0] enabled
[ 1.132187] f040b040.serial: ttyS1 at MMIO 0xf040b040 (irq = 109, base_baud = 5062500) is a 16550A
[ 1.141585] f040b080.serial: ttyS2 at MMIO 0xf040b080 (irq = 110, base_baud = 5062500) is a 16550A
[ 1.154236] loop: module loaded
[ 1.158095] ahci strict-ahci.0: can't get clock
[ 1.162759] ahci strict-ahci.0: SSS flag set, parall
el bus scan disabled
[ 1.186652] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 1.195189] ahci strict-ahci.0: flags: 64bit ncq sntf stag clo pmp slum part
[ 1.204880] scsi0 : ahci_platform
[ 1.208582] scsi1 : ahci_platform
[ 1.212153] ata1: SATA max UDMA/133 mmio [mem 0xf046a000-0xf046aa9b] port 0x100 irq 72
[ 1.220089] ata2: SATA max UDMA/133 mmio [mem 0xf046a000-0xf046aa9b] port 0x180 irq 72
[ 1.229512] spi_brcmstb f0443400.spi: 1-lane output, 3-byte address
[ 1.235912] spi_brcmstb f0443400.spi: master is unqueued, this is deprecated
[ 1.243240] m25p80 spi32766.0: found mx25l3255e, expected m25p80
[ 1.249270] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
[ 1.254526] 5 ofpart partitions found on MTD device spi32766.0
[ 1.260372] Creating 5 MTD partitions on "spi32766.0":
[ 1.265518] 0x000000000000-0x000000200000 : "flash0.bolt"
[ 1.271697] 0x000000200000-0x000000210000 : "flash0.macadr"
[ 1.277956] 0x000000210000-0x000000220000 : "flash0.nvram"
[ 1.284099] 0x000000220000-0x000000230000 : "flash0.devtree"
[ 1.290447] 0x000000000000-0x000000400000 : "flash0"
[ 1.297303] libphy: Fixed MDIO Bus: probed
[ 1.302074] bcmgenet f0b60000.ethernet: GENET 4.3 EPHY: 0x1002
[ 1.316641] libphy: bcmgenet MII bus: probed
[ 1.338977] bcmgenet f0b60000.ethernet: configuring instance for internal PHY
[ 1.347241] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.353081] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.477475] xhci-brcm: xHCI BRCM driver
[ 1.481449] xhci-brcm f0481000.xhci: xHCI Host Controller
[ 1.487040] xhci-brcm f0481000.xhci: new USB bus registered, assigned bus number 1
[ 1.494965] xhci-brcm f0481000.xhci: irq 116, io mem 0xf0481000
[ 1.501503] hub 1-0:1.0: USB hub found
[ 1.505279] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 1.512560] xhci-brcm f0481000.xhci: xHCI Host Controller
[ 1.518132] xhci-brcm f0481000.xhci: n
ew USB bus registered, assigned bus number 2
[ 1.526239] hub 2-0:1.0: USB hub found
[ 1.530022] hub 2-0:1.0: 2 ports detected
[ 1.534346] ehci-brcm: EHCI BRCM driver
[ 1.538370] ehci-brcm f0480300.ehci: EHCI Host Controller
[ 1.543953] ehci-brcm f0480300.ehci: new USB bus registered, assigned bus number 3
[ 1.561684] ehci-brcm f0480300.ehci: irq 112, io mem 0xf0480300
[ 1.586639] ehci-brcm f0480300.ehci: USB 2.0 started, EHCI 1.00
[ 1.593083] hub 3-0:1.0: USB hub found
[ 1.596867] hub 3-0:1.0: 1 port detected
[ 1.601014] ehci-brcm f0480500.ehci: EHCI Host Controller
[ 1.606571] ehci-brcm f0480500.ehci: new USB bus registered, assigned bus number 4
[ 1.624282] ehci-brcm f0480500.ehci: irq 113, io mem 0xf0480500
[ 1.646656] ehci-brcm f0480500.ehci: USB 2.0 started, EHCI 1.00
[ 1.653110] hub 4-0:1.0: USB hub found
[ 1.656892] hub 4-0:1.0: 1 port detected
[ 1.661044] ehci-brcm f0490300.ehci: EHCI Host Controller
[ 1.666612] ehci-brcm f0490300.ehci: new USB bus registered, assigned bus number 5
[ 1.684324] ehci-brcm f0490300.ehci: irq 118, io mem 0xf0490300
[ 1.706636] ehci-brcm f0490300.ehci: USB 2.0 started, EHCI 1.00
[ 1.713072] hub 5-0:1.0: USB hub found
[ 1.717637] hub 5-0:1.0: 1 port detected
[ 1.721787] ehci-brcm f0490500.ehci: EHCI Host Controller
[ 1.727361] ehci-brcm f0490500.ehci: new USB bus registered, assigned bus number 6
[ 1.745057] ehci-brcm f0490500.ehci: irq 119, io mem 0xf0490500
[ 1.766638] ehci-brcm f0490500.ehci: USB 2.0 started, EHCI 1.00
[ 1.773073] hub 6-0:1.0: USB hub found
[ 1.776854] hub 6-0:1.0: 1 port detected
[ 1.781026] ohci-brcm: OHCI BRCM driver
[ 1.785029] ohci-brcm f0480400.ohci: BRCM OHCI controller
[ 1.790605] ohci-brcm f0480400.ohci: new USB bus registered, assigned bus number 7
[ 1.796654] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.804415] ohci-brcm f0480400.ohci: irq 114, io mem 0xf0480400
[ 1.871158] hub 7-0:1.0: USB hub found
[
1.874930] hub 7-0:1.0: 1 port detected
[ 1.879154] ohci-brcm f0480600.ohci: BRCM OHCI controller
[ 1.884719] ohci-brcm f0480600.ohci: new USB bus registered, assigned bus number 8
[ 1.892350] ohci-brcm f0480600.ohci: irq 115, io mem 0xf0480600
[ 1.961142] hub 8-0:1.0: USB hub found
[ 1.964913] hub 8-0:1.0: 1 port detected
[ 1.969070] ohci-brcm f0490400.ohci: BRCM OHCI controller
[ 1.974638] ohci-brcm f0490400.ohci: new USB bus registered, assigned bus number 9
[ 1.982266] ohci-brcm f0490400.ohci: irq 120, io mem 0xf0490400
[ 1.996652] usb 4-1: new high-speed USB device number 2 using ehci-brcm
[ 2.051133] hub 9-0:1.0: USB hub found
[ 2.054906] hub 9-0:1.0: 1 port detected
[ 2.059322] ohci-brcm f0490600.ohci: BRCM OHCI controller
[ 2.064887] ohci-brcm f0490600.ohci: new USB bus registered, assigned bus number 10
[ 2.072599] ohci-brcm f0490600.ohci: irq 121, io mem 0xf0490600
[ 2.112226] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX101U, max UDMA/100
[ 2.118616] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.126856] ata1.00: configured for UDMA/100
[ 2.131385] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 AX10 PQ: 0 ANSI: 5
[ 2.140102] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.147817] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.148135] hub 10-0:1.0: USB hub found
[ 2.148160] hub 10-0:1.0: 1 port detected
[ 2.148438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.148450] ehci-pci: EHCI PCI platform driver
[ 2.148562] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.148570] ohci-pci: OHCI PCI platform driver
[ 2.148926] usbcore: registered new interface driver usb-storage
[ 2.149117] mousedev: PS/2 mouse device common for all mice
[ 2.149615] i2c /dev entries driver
[ 2.150098] IR NEC protocol handler initialized
[ 2.150100] IR RC5(x) protocol handler initialized
[ 2.150102] IR RC6 protocol handler in
itialized
[ 2.150104] IR JVC protocol handler initialized
[ 2.150106] IR Sony protocol handler initialized
[ 2.150108] IR RC5 (streamzap) protocol handler initialized
[ 2.150110] IR SANYO protocol handler initialized
[ 2.150112] IR MCE Keyboard/mouse protocol handler initialized
[ 2.150193] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 2.150537] sdhci: Secure Digital Host Controller Interface driver
[ 2.150538] sdhci: Copyright(c) Pierre Ossman
[ 2.150540] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.151674] mmc0: no vqmmc regulator found
[ 2.151678] mmc0: no vmmc regulator found
[ 2.196647] mmc0: SDHCI controller on f0440000.sdhci [f0440000.sdhci] using ADMA
[ 2.197721] mmc1: no vqmmc regulator found
[ 2.197723] mmc1: no vmmc regulator found
[ 2.236644] mmc1: SDHCI controller on f0440200.sdhci [f0440200.sdhci] using ADMA
[ 2.237113] usbcore: registered new interface driver usbhid
[ 2.237114] usbhid: USB HID core driver
[ 2.299008] TCP: cubic registered
[ 2.301160] sd 0:0:0:0: [sda] Write Protect is off
[ 2.301165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.301225] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.302167] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.303374] usb 4-1: string descriptor 0 malformed (err = -61), defaulting to 0x0409
[ 2.334313] NET: Registered protocol family 17
[ 2.341130] Key type dns_resolver registered
[ 2.345523] Registering SWP/SWPB emulation handler
[ 2.353856] regulator-dummy: disabling
[ 2.365110] ALSA device list:
[ 2.368247] No soundcards found.
[ 2.399320] sda: sda1
[ 2.402606] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.476661] usb 5-1: new high-speed USB device number 2 using ehci-brcm
[ 2.686654] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.690282] mmc1: BKOPS_EN bit is not set
[ 2.696489] mmc1: new high speed MMC card at address 0001
[ 2.702220] mmcblk0: mmc1:00
01 4FPD3R 3.64 GiB
[ 2.706857] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
[ 2.712870] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
[ 2.716742] Waiting for root device /dev/mmcblk0p4...
[ 2.727097] mmcblk0: p1 p2 p3 p4
[ 2.731836] mmcblk0boot1: unknown partition table
[ 2.737389] mmcblk0boot0: unknown partition table
[ 2.817833] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[ 2.833347] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
[ 2.842266] VFS: Mounted root (ext4 filesystem) on device 179:4.
[ 2.849495] devtmpfs: mounted
[ 2.852750] Freeing unused kernel memory: 248K (c0762000 - c07a0000)
[ 3.297237] EXT4-fs (sda1): recovery complete
[ 3.339665] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.484935] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
[ 3.796673] usb 5-1: reset high-speed USB device number 2 using ehci-brcm
[ 3.956289] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
[ 3.992165] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
[ 4.000279] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.028370] usbcore: registered new interface driver rt2800usb
[ 4.078559] random: dd urandom read with 82 bits of entropy available
[ 4.524934] procmk_init
[ 4.530436] bcm_event: module license 'Proprietary' taints kernel.
[ 4.536660] Disabling lock debugging due to kernel taint
[ 5.417522] random: nonblocking pool is initialized
[ 7.827395] DVB: registering new adapter (_vuplus_solo4k_)
[ 8.347315] bcm7376: hotplug_callback():
[ 8.347315] Hotplug - status.connected 1:0:1
[ 8.354323] bcm7376: hotplug_callback():
[ 8.354323] Hotplug - connecting HDMI to display 0xe
[ 8.656682] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[ 8.827022] [MPVR]: >> misc_pvr_init
[ 8.836432] [VID]: 6bcm7335_video_
init
[ 8.944633] [AUD]: 6bcm7335_audio_init
[ 8.966754] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=cce87400 state=ca90b000 config=bf7e80c4
[ 8.979341] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 8.987258] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=cc4f9c00 state=ccc86800 config=bf7e80cc
[ 8.999380] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 9.007485] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=cc4f9400 state=ccc86000 config=bf7e80d4
[ 9.019850] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 9.028260] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=cc4fbc00 state=cb3b9800 config=bf7e80dc
[ 9.040682] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 9.048645] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=cc4fb400 state=cb3b9000 config=bf7e80e4
[ 9.060783] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 9.068882] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=cc4fcc00 state=cb2d9800 config=bf7e80ec
[ 9.081160] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 9.089127] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=cc4fc400 state=cb2d9000 config=bf7e80f4
[ 9.101303] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 9.109288] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=cc4fdc00 state=ca94e800 config=bf7e80fc
[ 9.132718] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 9.145992] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=cc4fd400 state=ca94e000 config=bf7e8104
[ 9.166726] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 9.184883] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=ce29dc00 state=cb2dd000 config=bf7e810c
[ 9.206713] BRCM brcm_dvb0: DVB: registering adapter 0 front
end 0 (Vuplus FE)...
[ 9.216769] bcm7376: bcm7335_frontend_init(): vtuner1 : 11
[ 9.397198] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[ 9.429093] [LCD]: registered
[ 9.433620]
[ 9.433620] 000 I2C Device : cbe7c600>>Reset>>I2CDeviceInitialize
[ 9.986909] [CI]: registered ci0
[ 10.027341] [CI]: CI interface initialised
[ 10.027341]
[ 10.086901] [DFP]: registered dbox fp
[ 10.107453] [SC]: registered sci0
[ 10.112957] [SC]: registered sci1
[ 11.756663] system_time_set wakeup mode get
[ 11.816645] system_time_set wakeup mode get 0xc4
[ 11.885481] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
[ 11.893457] BKNI_Malloc(linuxkernel) top users:
[ 11.893457] blocks, bytes, filename:line
[ 11.902857] 1232, 267904, BSEAV/lib/utils/balloc.c:31
[ 12.406646] f0b60000.etherne:01: Broadcom BCM7366 PHY revision: 0x10, patch: 2
[ 14.172178] libphy: f0b60000.etherne:01 - Link is Up - 100/Full
[ 18.715443] NET: Registered protocol family 10
[ 18.994687] [VID]: VIDEO_SET_STREAMTYPE 0
[ 18.998941] [VID]: VIDEO_SELECT_SOURCE 1 0
[ 19.003496] [VID]: VIDEO_PLAY 1 2 0
[ 19.012687] [VID]: VIDEO_CONTINUE 1 1
[ 19.016610] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
[ 19.179215] [VID]: VIDEO_STOP 0 1
[ 19.183643] [VID]: VIDEO_SELECT_SOURCE 0 0
[ 25.687610] [AUD]: AUDIO_SET_MUTE 0
[ 25.692952] [AUD]: AUDIO_SET_MIXER -896500088
[ 25.697643] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[ 25.704250] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[ 25.712142] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[ 25.721966] [AUD]: AUDIO_SET_MIXER -896500088
[ 25.727868] [AUD]: AUDIO_SET_MIXER : amixl 32, amixr 32
[ 25.734663] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[ 25.742819] [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355
root@vusolo4k:~# [6n

Edited by marshella, 8 April 2016 - 18:59.

LG 55UJ630V 4K UHD > Yandex Duo Max & Zgemma H7 S 4K UHD

 
Samsung QE55Q60A 4K UHD > Yandex Max & Zgemma H9 Twin 4K UHD <> LCD4linux met Samsung SPF 87H

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #4 ColinB

  • Senior Member
  • 743 posts

+28
Good

Posted 8 April 2016 - 19:11

opkg list *si2168*

 

firmware-dvb-fe-si2168 - 1.0-r0.1

 

Give that a try


Xtrend et8000 7.1-Release

2 x 8/1 DiSEqC  30w 13e 19e 23e 28e   

Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+  ;)

WD10EARX 1TB

Sandisk 32GB USB for AFB, EPG, Picons & Timeshift

 

ZGemma Star S 7.0-Release

4/1 DiSEqC  30w 13e 19e 28e

Sandisk 8GB USB for AFB, EPG, Picons & Timeshift

 

LG 49UH610V UHD-HDR

UHF/Cable/Sat

 

E-Channelizer

 

 

 

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #5 WTE

  • Senior Member
  • 821 posts

+37
Good

Posted 8 April 2016 - 19:16

It's supported since kernel 3.19

Your model has an older kernel 3.14


Mut@nt HD51 STB 4K

   :rolleyes:                :rolleyes:

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #6 Marchella

  • Senior Member
  • 121 posts

+1
Neutral

Posted 8 April 2016 - 19:22

WTE if I understand correctly , this means that at the core of 3.14 will not work ?


LG 55UJ630V 4K UHD > Yandex Duo Max & Zgemma H7 S 4K UHD

 
Samsung QE55Q60A 4K UHD > Yandex Max & Zgemma H9 Twin 4K UHD <> LCD4linux met Samsung SPF 87H

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #7 Marchella

  • Senior Member
  • 121 posts

+1
Neutral

Posted 8 April 2016 - 19:31

 
can then help to Formuler F3 his tie , Kernel 4.0.1 ...

LG 55UJ630V 4K UHD > Yandex Duo Max & Zgemma H7 S 4K UHD

 
Samsung QE55Q60A 4K UHD > Yandex Max & Zgemma H9 Twin 4K UHD <> LCD4linux met Samsung SPF 87H

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #8 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 8 April 2016 - 20:52

Try those commands:

opkg install kernel-module-si21xx
opkg install kernel-module-si2168
opkg install firmware-dvb-fe-si2168
Then reboot and post dmesg, lsusb commands.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #9 WTE

  • Senior Member
  • 821 posts

+37
Good

Posted 8 April 2016 - 21:10

install follow and see if you still miss something

 

kernel-module-si2168

kernel-module-si2157

kernel-module-si21xx

I do not know if openpli provide the drivers otherwise add in /lib/firmware

dvb-demod-si2168-b40-01.fw
dvb-tuner-si2158-a20-01.fw

Mut@nt HD51 STB 4K

   :rolleyes:                :rolleyes:

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #10 Marchella

  • Senior Member
  • 121 posts

+1
Neutral

Posted 9 April 2016 - 02:53

athoik, WTE  
 
as requested , the stick can not see ....
Spoiler

Edited by marshella, 9 April 2016 - 02:56.

LG 55UJ630V 4K UHD > Yandex Duo Max & Zgemma H7 S 4K UHD

 
Samsung QE55Q60A 4K UHD > Yandex Max & Zgemma H9 Twin 4K UHD <> LCD4linux met Samsung SPF 87H

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #11 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 9 April 2016 - 06:36

Can you also install enigma2-plugin-drivers-dvb-usb-em28xx?

opkg install enigma2-plugin-drivers-dvb-usb-em28xx
reboot

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #12 Marchella

  • Senior Member
  • 121 posts

+1
Neutral

Posted 9 April 2016 - 09:45

It is no comfort ...
 
Spoiler

LG 55UJ630V 4K UHD > Yandex Duo Max & Zgemma H7 S 4K UHD

 
Samsung QE55Q60A 4K UHD > Yandex Max & Zgemma H9 Twin 4K UHD <> LCD4linux met Samsung SPF 87H

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #13 WTE

  • Senior Member
  • 821 posts

+37
Good

Posted 9 April 2016 - 10:54

We missed a file

opkg install kernel-module-dvb-usb-cxusb

 

I think however the box will hang itself up. I have found in my test modules the t230.


Mut@nt HD51 STB 4K

   :rolleyes:                :rolleyes:

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #14 Marchella

  • Senior Member
  • 121 posts

+1
Neutral

Posted 9 April 2016 - 11:04

WTE, :(
Spoiler

Edited by marshella, 9 April 2016 - 11:08.

LG 55UJ630V 4K UHD > Yandex Duo Max & Zgemma H7 S 4K UHD

 
Samsung QE55Q60A 4K UHD > Yandex Max & Zgemma H9 Twin 4K UHD <> LCD4linux met Samsung SPF 87H

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #15 WTE

  • Senior Member
  • 821 posts

+37
Good

Posted 9 April 2016 - 11:23

I think you installed to many modules

 

Install image and follow packages

kernel-module-dvb-usb-cxusb

firmware-dvb-fe-si2168

 

I get this and then box seems to stop :(

 

NET: Registered protocol family 10
usb 1-1: new high-speed USB device number 3 using ehci-brcm
usb 1-1: language id specifier not provided by device, defaulting to English
dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.


Mut@nt HD51 STB 4K

   :rolleyes:                :rolleyes:

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #16 WTE

  • Senior Member
  • 821 posts

+37
Good

Posted 9 April 2016 - 11:56

just as info a very similar dvb-t2 it's initialise without issues DVBsky T330 (+- 20/30 euro)

 

+

 

usb 1-1: new high-speed USB device number 3 using ehci-brcm
usb 1-1: dvb_usb_v2: found a 'DVBSky T330' in warm state
usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to
the software demuxer DVB: registering new adapter (DVBSky T330)
usb 1-1: dvb_usb_v2: MAC address: 00:cc:10:a5:33:0c
i2c i2c-7: Added multiplexed i2c bus 8
si2168 7-0064: Silicon Labs Si2168 successfully attached
si2157 8-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
usb 1-1: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)...
Registered IR keymap rc-dvbsky
input: DVBSky T330
as /devices/platform/ehci-brcm.0/usb1/1-1/rc/rc0/input3 rc0: DVBSky
T330 as /devices/platform/ehci-brcm.0/usb1/1-1/rc/rc0 usb 1-1:
dvb_usb_v2: schedule remote query interval to 300 msecs usb 1-1:
dvb_usb_v2: 'DVBSky T330' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_dvbsky


Mut@nt HD51 STB 4K

   :rolleyes:                :rolleyes:

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #17 WTE

  • Senior Member
  • 821 posts

+37
Good

Posted 9 April 2016 - 12:38

I have the geniatech T230 working on my mutant HD2400

installed

kernel-module-dvb-usb-cxusb

firmware-dvb-fe-si2168

kernel-module-si2157
kernel-module-si2168

 

DVBsky T330

kernel-module-dvb-usb-dvbsky
firmware-dvb-fe-si2168

kernel-module-si2157
kernel-module-si2168


Mut@nt HD51 STB 4K

   :rolleyes:                :rolleyes:

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #18 Marchella

  • Senior Member
  • 121 posts

+1
Neutral

Posted 9 April 2016 - 15:39

 
WTE after the installation of three packets received eternal boot, if you remove the stick removing dib0070.ko boxing boots , what's wrong?
 
kernel-module-dvb-usb-cxusb
firmware-dvb-fe-si2168
kernel-module-si2157
kernel-module-si2168

Edited by marshella, 9 April 2016 - 15:42.

LG 55UJ630V 4K UHD > Yandex Duo Max & Zgemma H7 S 4K UHD

 
Samsung QE55Q60A 4K UHD > Yandex Max & Zgemma H9 Twin 4K UHD <> LCD4linux met Samsung SPF 87H

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #19 WTE

  • Senior Member
  • 821 posts

+37
Good

Posted 9 April 2016 - 17:35

I am certain with this 4 packages the stick is recognized.

Maybe your stick is damaged or it's not a geniatech T230?

 

You get in your log follow: dvb_usb_cxusb: Unknown symbol dib0070_wbd_offset (err 0)

So I assume that the module is not load.

 

The lsmod from me with kernel 4.0.1 is as follow

dvb_usb_cxusb          45308  1
dib0070                 8219  1 dvb_usb_cxusb
dvb_usb                17738  1 dvb_usb_cxusb


Mut@nt HD51 STB 4K

   :rolleyes:                :rolleyes:

Re: GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner #20 Dimitrij

  • PLi® Core member
  • 10,379 posts

+354
Excellent

Posted 9 April 2016 - 17:40

https://tvheadend.or.../5/topics/17365


GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K

Back to The Lounge

5 user(s) are reading this topic

0 members, 5 guests, 0 anonymous users

  1. Forums
  2. → General Discussion
  3. → The Lounge