985 replies to this topic

[Moonwalker]

Ok thanks now I got this but Service APP is still showing GSTPlayer not Installed. This is on DM520 btw.

 

 

root@dm520:~# ffmpeg --version

ffmpeg version 2.8.5 Copyright © 2000-2016 the FFmpeg developers

  built with gcc 4.9.2 (GCC)

  configuration: --sysroot=/mnt/new2/xspeedlx1/build-enviroment/builds/openatv/release/et4x00/tmp/sysroots/et4x00 --cross-prefix=mipsel-oe-linux- --prefix=/mnt/new/e2/simpleeplayer3/tmp/ffmpeg/tmp/ffmpeg-2.8.5/usr/ --enable-cross-compile --target-os=linux --arch=mipsel --disable-mipsdspr1 --disable-mipsdspr2 --disable-mipsfpu --enable-shared --disable-static --disable-debug --disable-ffplay --disable-ffprobe --disable-ffserver --disable-outdevs --disable-doc --disable-htmlpages --disable-manpages --disable-podpages --disable-txtpages --disable-lzma --enable-openssl --enable-zlib --enable-cross-compile --enable-small --disable-sdl --disable-xlib --disable-d3d11va --disable-dxva2 --disable-vaapi --disable-vda --disable-vdpau --enable-nonfree

  libavutil      54. 31.100 / 54. 31.100

  libavcodec     56. 60.100 / 56. 60.100

  libavformat    56. 40.101 / 56. 40.101

  libavdevice    56.  4.100 / 56.  4.100

  libavfilter     5. 40.101 /  5. 40.101

  libswscale      3.  1.101 /  3.  1.101

  libswresample   1.  2.101 /  1.  2.101

Unrecognized option '-version'.

Error splitting the argument list: Option not found

root@dm520:~#

[s3n0]

Hi, guys,

 

pls help me. I had problems with audio playback of IPTV streams. I tested previous unofficial image from MastaG and there was streams working perfectly.

 

Now I want to use the new one image OpenPLi 4.0 + ServiceApp with a service code (5002) to play through exteplayer3. What should I do ? :-)

 

I have clean install of the OpenPLi 4.0 image (nightbuild 2016-28-12) in my Formuler-F3 (MIPS processor). Already there I have downloaded and installed the IPTVPlayer. So at the same time he was installed ffmpeg (2.8.5) and exteplayer3. I have followed these instructions. But I do not know how to install appservice. I would like exteplayer3 used to play online streams - by changing code from 4097 to 5002 in the userbouquet. What do I do now ? :-)

 

Thanks.

 

P.S.:  Appservice is a very good thing !

Edited by s3n0, 30 December 2016 - 00:49.

[bartoma55]

first in 2017!!

 

sorry for my poor english, but I'm an older italian boy...

 

thanks to all for hard work and job!

 

I've compiled serviceapp, ffmpeg, gstplayer, exteplayer3 for armv7 to have fun with mu mut@nt HD51.

I've also installed all stuff in a OpenPLI 5 (master-next) distribution.

 

all the job make me crazy, but all seems to work.

 

I can set preferred player with serviceapp installed as system plugin.

I can play mkv streams with h264 compression and full hd resolution with exteplatyer3.

 

so, thanks to all, expecially to mx3L an the OpenPLI team, for the fantastic job.

[bartoma55]

a question:

when serviceapp use exteplayer3 as service, the box are using ffmpeg to read input stream?

 

if exteplayer3 use ffmpeg, why I can not read hevc compressed stream, that ffmpeg on command line reads without error?

 

exteplayer3:

exteplayer3 /media/hdd/movie/tos-4096x1720-tiles.mkv > /tmp/1
{"EPLAYER3_EXTENDED":{"version":30}}
{"PLAYBACK_OPEN":{"OutputName":"Output", "file":"file:///media/hdd/movie/tos-4096x1720-tiles.mkv", "sts":0}}
{"OUTPUT_OPEN":{"sts":-1}}
{"PLAYBACK_PLAY":{"sts":0}}
{"v_c":{"id":-1,"e":"","n":"","w":-1,"h":-1,"f":0,"p":-1}}  <<< video stream not recognized, frame width & height -1
{"a_l": [{"id":1,"e":"A_AC3","n":"eng"}]}
{"a_c":{"id":1,"e":"A_AC3","n":"eng"}}
{"s_l": [{"id":2,"e":"S_TEXT/SUBRIP","n":"hrv"}, {"id":3,"e":"S_TEXT/SUBRIP","n":"cze"}, {"id":4,"e":"S_TEXT/SUBRIP","n":"dan"}, {"id":5,"e":"S_TEXT/SUBRIP","n":"ger"}, {"id":6,"e":"S_TEXT/SUBRIP","n":"eng"}, {"id":7,"e":"S_TEXT/SUBRIP","n":"spa"}, {"id":8,"e":"S_TEXT/SUBRIP","n":"fre"}, {"id":9,"e":"S_TEXT/SUBRIP","n":"gre"}, {"id":10,"e":"S_TEXT/SUBRIP","n":"heb"}, {"id":11,"e":"S_TEXT/SUBRIP","n":"hun"}, {"id":12,"e":"S_TEXT/SUBRIP","n":"ind"}, {"id":13,"e":"S_TEXT/SUBRIP","n":"ita"}, {"id":14,"e":"S_TEXT/SUBRIP","n":"jpn"}, {"id":15,"e":"S_TEXT/SUBRIP","n":"dut"}, {"id":16,"e":"S_TEXT/SUBRIP","n":"nor"}, {"id":17,"e":"S_TEXT/SUBRIP","n":"per"}, {"id":18,"e":"S_TEXT/SUBRIP","n":"pol"}, {"id":19,"e":"S_TEXT/SUBRIP","n":"por"}, {"id":20,"e":"S_TEXT/SUBRIP","n":"rus"}, {"id":21,"e":"S_TEXT/SUBRIP","n":"chi"}]}
{"s_c":{"id":-1,"e":"","n":""}}

ffmpeg:

ffmpeg -i /media/hdd/movie/tos-4096x1720-tiles.mkv
ffmpeg version 3.1.3 Copyright © 2000-2016 the FFmpeg developers
  built with gcc 6.2.0 (GCC)
  configuration: ....

Input #0, matroska,webm, from '/media/hdd/movie/tos-4096x1720-tiles.mkv':
  Metadata:
    encoder         : libebml v1.3.0 + libmatroska v1.4.1
    creation_time   : 2014-03-24 10:14:59
  Duration: 00:12:14.17, start: 0.000000, bitrate: 2657 kb/s
    Stream #0:0(eng): Video: hevc (Main), yuv420p(tv), 4096x1714, SAR 1:1 DAR 2048:857, 24 fps, 24 tbr, 1k tbn, 1k tbc (default) <<< video stream recognized, frame width & height are correct
    Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1(side), fltp, 448 kb/s (default)
    Stream #0:2(hrv): Subtitle: subrip
    Stream #0:3(cze): Subtitle: subrip
    Stream #0:4(dan): Subtitle: subrip
    Stream #0:5(ger): Subtitle: subrip
    Stream #0:6(eng): Subtitle: subrip (default)
    Stream #0:7(spa): Subtitle: subrip
    Stream #0:8(fre): Subtitle: subrip
    ....

[samsamsam]

@bartoma55

 

ffmpeg is used only as DEMUX, same for gstreamer.

Video codec must be supported by your hardware. 

 

Also there is need to add formater for  HEVC frame to exteplayer3 (at now you will not able to play HEVC with exteplayer3 even if your hardware support it because there is no HEVC formater in exteplayer3). Formater mean there is need to add some header do demuxed frame by ffmpeg before inject to video decoder.

 

 

Video can NOT be decoded by main CPU (software decoding).

Audio can be decoded by main CPU (software decoder) and injected to audio decoder as RAW PCM or LPCM.

 

Regards,

SSS

Edited by samsamsam, 6 January 2017 - 17:36.

[bartoma55]

@bartoma55

 

ffmpeg is used only as DEMUX, same for gstreamer.

Video codec must be supported by your hardware. 

 

Also there is need to add formater for  HEVC frame to exteplayer3 (at now you will not able to play HEVC with exteplayer3 even if your hardware support it because there is no HEVC formater in exteplayer3). Formater mean there is need to add some header do demuxed frame by ffmpeg before inject to video decoder.

 

 

Video can NOT be decoded by main CPU (software decoding).

Audio can be decoded by main CPU (software decoder) and injected to audio decoder as RAW PCM or LPCM.

 

Regards,

SSS

@samsamsam

many thanks for clear reply.

[maigais]

or anyone can tell how to correct

Attached Files

•  e.zip   9.5KB   33 downloads

[MastaG]

Same here. Latest e2 code seem to have broken serviceapp.
It crashes when attempting to run exteplayer3

[maigais]

I already was thinking that the guilty are exteplayer3
how can repair serviceapp

[Taapat]

Same here. Latest e2 code seem to have broken serviceapp.
It crashes when attempting to run exteplayer3

 

Did you tried to recompile the serviceapp after changes in the enigma?

For me this fix the problem.

Edited by Taapat, 7 January 2017 - 12:32.

[s3n0]

Hi, guys,

 

pls help me. I had problems with audio playback of IPTV streams. I tested previous unofficial image from MastaG and there was streams working perfectly.

 

Now I want to use the new one image OpenPLi 4.0 + ServiceApp with a service code (5002) to play through exteplayer3. What should I do ? :-)

 

I have clean install of the OpenPLi 4.0 image (nightbuild 2016-28-12) in my Formuler-F3 (MIPS processor). Already there I have downloaded and installed the IPTVPlayer. So at the same time he was installed ffmpeg (2.8.5) and exteplayer3. I have followed these instructions. But I do not know how to install appservice. I would like exteplayer3 used to play online streams - by changing code from 4097 to 5002 in the userbouquet. What do I do now ? :-)

 

Thanks.

 

P.S.:  Appservice is a very good thing !

 

In some cases sound starts but in some cases not. Very commonly no. I was trying 4097 (by system) and/or 5002 (by exteplayer3) too. Can someone help me  please ? Thanks.

LOG-file:  e2_debug_OpenATV5.3_2016-01-07.log   291.11KB   3 downloads

[MastaG]

 

Same here. Latest e2 code seem to have broken serviceapp.
It crashes when attempting to run exteplayer3

 

Did you tried to recompile the serviceapp after changes in the enigma?

For me this fix the problem.

 

 

Yeah!, I've bumped the package to r1 which triggered a rebuild, now it works

Now I can see whether dts downmix works on my dm800se.

 

Thank you

[mdshd]

I installed serviceapp from feed on openatv 5.3 and all streams works fine. 

 

The Problem in Channel Selection!

 

1. The EPG in Channel Selection don't show. Only in Infobar and as session.CurrentService.

 

2. If I have the same channel as SD over SAT, and I put the same reference but with 4097 or 5002, picon and EPG don't show.

 

With Gstreamer 4097 picon shows up automatically and EPG too.

 

Which file should I edit to get the EPG and picon automatically with 5002? I don't want to wait for devs from openatv fix this.

[ian1095]

I did report this issue to mx3L some months ago, so he is aware of it, I can only assume he's not had the time yet to fix it.

 

People have lives away from this hobby, and I'm sure as soon as he does find the time,he will supply a fix.

 

Ian.

Edited by ian1095, 9 January 2017 - 08:15.

[mdshd]

Ian, enigma2 is not one man show. There are other people who know this too, so mx3L do not have to do this if he has no time. Nobody told this and nobody asked for your unneeded answer.

[ian1095]

Its a Serviceapp bug buddy, not an Enigma2 bug.

 

Serviceapp is written by mx3L ( which others contribute to such as Taapat )

 

Ian.

[mdshd]

Ian, an user in openatv forum has reported, that on hdmu image epg works fine also in channellist.

[maigais]

exteplayer3 not work url

https://58174450afee...FU0kxcz0=_24.ts
https://58174450afee...FU0kxcz0=_25.ts
https://58174450afee...FU0kxcz0=_26.ts

 

Edited by maigais, 14 January 2017 - 04:59.

[samsamsam]

If someone interested I prepared patch adding MPEG-DASH demux support:

https://github.com/s...ash_demux.patch

 

Regards,

SSS

[ian1095]

I'm very interested.

 

Will this be added to your IPTV Player plugin so I can obtain the Binary ?

 

Ian.