Posted 26 October 2016 - 21:46
Hi,
I have a dreambox DM800 HD PVR and OpenWebif 0.1+git659.
To update OpenWebif, I deleted and reinstalled it. But I became the same version of OpenWebif and later on a message saying that OpenWebif is not available because there is no module OpenSSL.
So what can I do ?
I found a new version of OpenWebif at https://github.com/E...lugin-OpenWebif, but I do not know how to install it. I prefer this solution if possible.
thanks for your help
sincerely
Klaus
Posted 26 October 2016 - 21:48
OpenPLi 2.1 is the last available version for this end-of-life box, which is no longer maintained.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 26 October 2016 - 21:58
OpenPLi 2.1 is the last available version for this end-of-life box, which is no longer maintained.
I understood that. I search a newer version of OpenWebIF or if not possible, make work the version actually installed.
Klaus
Posted 26 October 2016 - 22:20
I don't know if it is that easy, especially with regards to dependencies, there's a lot more OpenSSL related stuff in more recent versions.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 27 October 2016 - 09:32
I don't know if it is that easy, especially with regards to dependencies, there's a lot more OpenSSL related stuff in more recent versions.
In more recent versions of what ? Openpli ?
But if there is no newer version of Openpli for my box, this is not useful for me.
Klaus
Posted 27 October 2016 - 11:13
No, more recent versions (as in: newer than you have on your box) of OpenWebIf.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 27 October 2016 - 12:46
so how to make work my OpenWebif which needs OpenSSL ?
Klaus
Posted 27 October 2016 - 21:43
I found out that openssl is installed :
root@dm800:~# opkg install openssl
Package openssl (0.9.8m-r14.1) installed in root is up to date.opkg install openssl
Package openssl (0.9.8m-r14.1) installed in root is up to date.
root@dm800:/# find -iname openssl
./usr/bin/openssl
./usr/lib/python2.6/site-packages/OpenSSL
So certainly Openwebif cannot find it. How to know where OpenWebif expects openssl ?
Klaus
Posted 27 October 2016 - 22:24
It is probably a version issue and not a location issue, 0.9.8 is very old.
It is an indirect dependency, OpenWebIf requires python-pyopenssl, and that requires the OpenSSL package. So it could well be that OpenWebIf needs a specific minumum version of that python package, or it needs Python 2.7 instead of 2.6.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 28 October 2016 - 20:44
Python 2.7 is not available for my box.
I think the best way to resolve my problem ist flashing my box with a new image.
Actually it works with "backup800.nfi", I don't know anymore from where I downloaded it. I don't know which version of openpli it contains.
Where can I get OpenPLi 2.1 for a cloned dreambox ?
cheers
Klaus
Posted 28 October 2016 - 20:58
Posted 29 October 2016 - 23:39
As you may have guested, the answer is "nowhere". We don't make images for clone boxes.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 November 2016 - 12:51
OpenWebif is not a "module" that you can install into an existing image. It has very tight dependencies with enigma.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 6 November 2016 - 16:33
Posted 26 November 2016 - 22:41
Finally it flashed my box with the same OpenPli version, and everything works again, thanks for help.
Klaus
OpenWebif: EPG is not displayed correctly (distorted)Started by Spittek, 8 Nov 2023  OpenWebif, EPG, Mac, Chrome
|
|
|
||
OpenWebIf geeft niet de juiste url door aan VLC, poortnummer is "None"Started by haakneus, 24 Jul 2021 OpenWebIF
|
|
|
||
Openpli 8.0 ffmpeg problemStarted by tigrousad, 2 Mar 2021 serviceapp, ffmpeg, exteplayer3 and 2 more...
|
|
|
||
Autotimer in OpemWebif not workingStarted by martininhio, 31 Aug 2020 autotimer, openwebif
|
|
|
||
OpenWebif not working for stream channelsStarted by lievenborms, 26 Oct 2019 stream, OpenWebif, Web TV
|
|
|
0 members, 6 guests, 0 anonymous users
