#1
Posted 9 December 2007 - 20:17
I then reinstalled PLI Helenite Final and could find my both satellites.
Ive installed booth images from the web interface.
Aim using two quad lnb on 1.0W and 5.0E.
Anyone having an idea of whats my problem?
Re: Strange problem with Iolite on dm600s #2
Posted 9 December 2007 - 21:06
One possible issue I can think of is a mismatch in your satellite.xml and/or your config.
Some channel list providers, and some satellite.xml creators, define Sirius as being on 5.0E, while in effect the correct position is 4,8E. De satellite.xml included in Iolite is generated from the lyngsat website, and contains the correct position.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Strange problem with Iolite on dm600s #3
Posted 9 December 2007 - 21:29
And did not restore any settings.
Thats what I think is a clean install.
When I then scan 5.0E, I get an message that says that the satellite could not be found.
When I do the same on 1.0W It's OK.
I then did the same with Helenite, and all works.
But how do I do a factory reset on a dm600, if not installing from the web interface?
Re: Strange problem with Iolite on dm600s #4
Re: Strange problem with Iolite on dm600s #5
Posted 9 December 2007 - 23:18
With installing Iolite, you also got our new satellite.xml file, in which Sirius is on 4,8E, not on 5,0E. That's why your scan fails.I installed the Iolite image from the web interface.
And did not restore any settings.
Thats what I think is a clean install.
When I then scan 5.0E, I get an message that says that the satellite could not be found.
When I do the same on 1.0W It's OK.
There are three things you can do:
1) go into satellite setup, and select Sirius on 4,8E. This will list all current channels as (removed service), you have to scan again.
2) copy the satellite.xml to /var/etc, edit it, and change the 4,8 to 5,0.
3) copy the satellite.xml from your helenite config (if you have a backup) to /var/etc.
Re: Strange problem with Iolite on dm600s #6
Posted 10 December 2007 - 19:19
I have two quad lnb with 4 diseq switches.
And the four switches goes to four dreamboxes in different rooms.
When I move my dm600 to another room and do a scan, it finds booth satellites.
I have changed the switches, but still same problem in only one room.
I think I have a problem with one cable from my switch to that room.
But why das it work with Helenite but not with Iolite?
So my question is if there is a difference with those images on how to change satellites on the diseq switch.
Re: Strange problem with Iolite on dm600s #7
Re: Strange problem with Iolite on dm600s #8
Re: Strange problem with Iolite on dm600s #9
Posted 10 December 2007 - 20:01
You try to use the sat.xml which is provided with the image.
If so, try a reboot first, then try again.
The sat.xml provided in the image is a fresh one from about 2 weeks ago.
We have seen some simular problems in the past with Thor.
If it's not this, have you tried uploading your own satlist ?
From another box for example.
Re: Strange problem with Iolite on dm600s #10
Also tagged with one or more of these keywords: DM600
Dreambox Second Stage Loader BUILD #67, built 20081024Started by alias haha, 22 Mar 2017 DM600 |
|
|||
Deleted vlc server ip addressesStarted by Zang3t5u, 12 Mar 2013 ip address, vlc, dreambox, dm600 |
|
|||
DM600 openvpn tunStarted by nabilosat, 6 May 2012 DM600 |
|
|||
Selecting Russian EPGStarted by jelleeelco, 14 Mar 2012 Russian EPG, DM600, OpenPli and 1 more... |
|
|||
djmount on DM600PVRStarted by tornblad, 26 Feb 2012 dm600, dlna, upnp, djmount, fuse |
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users