Jump to content


Photo

Openpli 4 und Crystal Phoenix Card Reader

VU+ solo 4k Crystal Phoenix Card Rea TBS3102

  • Please log in to reply
13 replies to this topic

#1 chcp

  • Member
  • 7 posts

0
Neutral

Posted 8 March 2017 - 19:06

Hallo zusammen,

 

ich versuche zu einem VU+ solo 4k mit Openpli 4 mit neusten Updates ein TBS3102 5 Crystal Phoenix Card Reader einzuschließen. Der wird nicht richtig erkannt. Sein ID ist 0403:6001.

Ich habe versucht enigma2-plugin-drivers-usbserial – 1.0-r0.0 zu installieren aber es endete mit Fehler.

 

root@vusolo4k:/dev# opkg install enigma2-plugin-drivers-usbserial

Installing enigma2-plugin-drivers-usbserial (1.0-r0.0) on root.

Downloading http://downloads.pli...hf-vfp-neon.ipk.

Collected errors:

* satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-drivers-usbserial:

* kernel-module-pl2303 * kernel-module-ftdi-sio * kernel-module-belkin-sa * kernel-module-keyspan *

* opkg_install_cmd: Cannot install package enigma2-plugin-drivers-usbserial.

 

 

opkg list kernel-module-ftdi-sio ergibt nichts

 

Wie bekomme ich es zum laufen?

Danke für jede Antwort!

 

Thomas



Re: Openpli 4 und Crystal Phoenix Card Reader #2 SpaceRat

  • Senior Member
  • 1,030 posts

+65
Good

Posted 8 March 2017 - 19:53

OpenPLi wird aus dem unveränderten "bsp" des Herstellers gebaut und da sind FTDI & Co. nicht in der Kernel-Config ausgewählt, es gibt die Module also unter OpenPLi nicht.

Da OpenPLi selber keine Änderungen an Kernel-Configs vornimmt, müßte OpenPLi als solches nun erst einmal bei Vu+ anfragen, damit die das aufnehmen.
1st box: Vu+ Ultimo 4k 4xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
2nd box: Gigablue Quad 4k 2xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
testing boxes: Vu+ Duo² + AX Quadbox HD2400 + 2x Vu+ Solo² + Octagon SF4008
Sats & Pay-TV: Astra 19.2°E + Hotbird 13°E with Redlight / SCT HD / SES Astra HD- / Sky V14 / 4th empire propaganda TV
Card-Server: Raspberry Pi + IPv6-capable oscam
Router: Linksys WRT1900ACS w/ LEDE + Fritz!Box 7390

Re: Openpli 4 und Crystal Phoenix Card Reader #3 SpaceRat

  • Senior Member
  • 1,030 posts

+65
Good

Posted 8 March 2017 - 19:59

https://github.com/v...ig#L2832-#L2883

Und: Es betrifft auch die Ultimo 4k, damit vermutlich auch die Uno 4k.
1st box: Vu+ Ultimo 4k 4xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
2nd box: Gigablue Quad 4k 2xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
testing boxes: Vu+ Duo² + AX Quadbox HD2400 + 2x Vu+ Solo² + Octagon SF4008
Sats & Pay-TV: Astra 19.2°E + Hotbird 13°E with Redlight / SCT HD / SES Astra HD- / Sky V14 / 4th empire propaganda TV
Card-Server: Raspberry Pi + IPv6-capable oscam
Router: Linksys WRT1900ACS w/ LEDE + Fritz!Box 7390

Re: Openpli 4 und Crystal Phoenix Card Reader #4 chcp

  • Member
  • 7 posts

0
Neutral

Posted 8 March 2017 - 20:28

Hmmm …. Keine gute Nachricht für mich.

Nutzt keine ein externes Kartenleser? So wie ich das gesehen habe ist da eigentlich nichts drin. Habe gehofft auf CP210X, aber die ist auch nicht drin.

Trotz Danke für schnelle Antwort.

 

Thomas



Re: Openpli 4 und Crystal Phoenix Card Reader #5 WanWizard

  • PLi® Core member
  • 68,311 posts

+1,719
Excellent

Posted 8 March 2017 - 21:01

@Spacerat,

 

Was muss genau dort sein? Dann können wir Vu+ bitten es zu aktualisieren.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Openpli 4 und Crystal Phoenix Card Reader #6 chcp

  • Member
  • 7 posts

0
Neutral

Posted 8 March 2017 - 21:32

Es ist ein Kartenleser Crystal Phoenix Card Reader und der basierter auf FTDI Chip. So erkennt das ein Rechner, ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC.

Danke!



Re: Openpli 4 und Crystal Phoenix Card Reader #7 chcp

  • Member
  • 7 posts

0
Neutral

Posted 8 March 2017 - 21:39

und weiter

usb 3-2: Manufacturer: FTDI
[ 4587.957513] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 4587.957581] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
[ 4587.957859] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0
 



Re: Openpli 4 und Crystal Phoenix Card Reader #8 SpaceRat

  • Senior Member
  • 1,030 posts

+65
Good

Posted 8 March 2017 - 22:03

@Spacerat,

Was muss genau dort sein? Dann können wir Vu+ bitten es zu aktualisieren.

Compare USB_SERIAL section with that of the older boxes (Solo2).
FTDI_SIO, BEKIN_SA and CPsomewhat 21xx I would say.
1st box: Vu+ Ultimo 4k 4xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
2nd box: Gigablue Quad 4k 2xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
testing boxes: Vu+ Duo² + AX Quadbox HD2400 + 2x Vu+ Solo² + Octagon SF4008
Sats & Pay-TV: Astra 19.2°E + Hotbird 13°E with Redlight / SCT HD / SES Astra HD- / Sky V14 / 4th empire propaganda TV
Card-Server: Raspberry Pi + IPv6-capable oscam
Router: Linksys WRT1900ACS w/ LEDE + Fritz!Box 7390

Re: Openpli 4 und Crystal Phoenix Card Reader #9 WanWizard

  • PLi® Core member
  • 68,311 posts

+1,719
Excellent

Posted 8 March 2017 - 22:14

Is my German that bad? ;) Ok. we'll pass that on to VU+.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Openpli 4 und Crystal Phoenix Card Reader #10 SpaceRat

  • Senior Member
  • 1,030 posts

+65
Good

Posted 9 March 2017 - 02:04

I'm just switching back and forth between German and English and I was writing my last post here on my Smartphone.

This is the config for the Solo², it has all the USB serial drivers:
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_ZTE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_DEBUG is not set
You should be able to just copy/paste this section into the Uno 4k, Solo 4k and Ultimo 4k defconfigs.
1st box: Vu+ Ultimo 4k 4xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
2nd box: Gigablue Quad 4k 2xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
testing boxes: Vu+ Duo² + AX Quadbox HD2400 + 2x Vu+ Solo² + Octagon SF4008
Sats & Pay-TV: Astra 19.2°E + Hotbird 13°E with Redlight / SCT HD / SES Astra HD- / Sky V14 / 4th empire propaganda TV
Card-Server: Raspberry Pi + IPv6-capable oscam
Router: Linksys WRT1900ACS w/ LEDE + Fritz!Box 7390

Re: Openpli 4 und Crystal Phoenix Card Reader #11 WanWizard

  • PLi® Core member
  • 68,311 posts

+1,719
Excellent

Posted 9 March 2017 - 15:17

I've passed it on.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Openpli 4 und Crystal Phoenix Card Reader #12 WanWizard

  • PLi® Core member
  • 68,311 posts

+1,719
Excellent

Posted 24 March 2017 - 13:52

VU+ has responded and has activated USB_SERIAL in the BSP.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Openpli 4 und Crystal Phoenix Card Reader #13 kadiro1312

  • Member
  • 17 posts

0
Neutral

Posted 24 March 2017 - 14:37

thank your for this good news sir.



Re: Openpli 4 und Crystal Phoenix Card Reader #14 chcp

  • Member
  • 7 posts

0
Neutral

Posted 4 April 2017 - 17:26

Hallo,

 

ich habe update gemacht (mit neuem Kernel) und Modul installiert und siehe an, alles funktioniert. Problem Gelöst. Danke!

 

Thomas





Also tagged with one or more of these keywords: VU+ solo 4k, Crystal Phoenix Card Rea, TBS3102

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users