Jump to content


Photo

xsarius revo 4k

mediaplayer mkv dvd

  • Please log in to reply
47 replies to this topic

#1 kiras

  • Senior Member
  • 32 posts

0
Neutral

Posted 27 March 2017 - 17:24

Hallo ik heb een sxarius revo 4k gekocht en pli er op gezet. Het beeld is uitstekend het enige probleem wat ik heb als ik mkv bestanden wil afspelen krijg ik geen beeld en ook geen geluid. Ik roep deze op van mijn nas maar het beeld blijft zwart.



Re: xsarius revo 4k #2 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,468 posts

+824
Excellent

Posted 27 March 2017 - 19:00

En wat zit er in die MKV bestanden?


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: xsarius revo 4k #3 fenzo

  • Senior Member
  • 212 posts

+6
Neutral

Posted 30 March 2017 - 18:17

maakt niet veel uit, speelt niks af, geen mp4, mkv en zelfs geen mp3 muziek files.

enige wat hij afspeelt zijn de door een andere box opgenomen ts files.

ik heb mkv geprobeerd met HD en met SD materiaal, speelt op gewone HD box (ET1000) alle files wel af.



Re: xsarius revo 4k #4 kiras

  • Senior Member
  • 32 posts

0
Neutral

Posted 30 March 2017 - 19:10

Is toch raar mijn vorige sxarius pure hd speelde dit wel af. En met openatv lukt het wel met revo 4k maar deze image vind ik niet zo gebruiksvriendelijk. Ik denk dat het in de software van pli zit. Mischien is de revo nog te nieuw,Maar hopen dat het team van pli dit voor elkaar krijgt



Re: xsarius revo 4k #5 fenzo

  • Senior Member
  • 212 posts

+6
Neutral

Posted 30 March 2017 - 19:14

update:

 

Is blijkbaar een fout in OpenPli, heb net openATV erop gezet en daar werken alle MKV, mp4 en mp3 wel.

Hopelijk snel een oplossing bij PLI

 

verder eigenlijk best wel een leuk ontvangertje, zeker voor het geld.

leverbaar met 2x 4K sat tuner en ook met 1x 4K sattuner en dubbelekabeltuner.

Inbouw mogelijkheid voor HDU en usb 3.0 achterop :)


Edited by fenzo, 30 March 2017 - 19:17.


Re: xsarius revo 4k #6 Stefan

  • Senior Member
  • 1,491 posts

+57
Good

Posted 31 March 2017 - 11:14

OpenPLI heeft een ver verouderde gstreamer dat is de reden dat heel veel files niet worden afgespeeld met de mediaplayer.
Met OpenPLI 5.0 is dit probleem opgelost dus nog heel even geduld.
VU solo 4k ,twin satelliet tuner en 1 kabel tuner en VU solo se v2 ,dual kabel tuner...E85 Maximum multi focus schotel en een Triax 88cm schotel met een 2 way Triax lnb rail....5.0w 0.8w 4.8e 9.0e 13e 19.2e 23.5e 28.2e....VTI 14.0.5 - 6 Inverto black ultra twin lnb's en 2 Alps twin lnb's, Nvidia shield tv.

Re: xsarius revo 4k #7 fenzo

  • Senior Member
  • 212 posts

+6
Neutral

Posted 31 March 2017 - 12:25

OpenPLI heeft een ver verouderde gstreamer dat is de reden dat heel veel files niet worden afgespeeld met de mediaplayer.
Met OpenPLI 5.0 is dit probleem opgelost dus nog heel even geduld.

Kan wel zijn, maar OpenPLI op mijn ET10000 speelt de eerder genoemde bestanden wel af, ik neem aan dat dezelfde gstreamer gebruikt wordt voor de ET10000 als de Xsarius Revo 4K, dus zal dat de reden niet zijn toch?



Re: xsarius revo 4k #8 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,468 posts

+824
Excellent

Posted 31 March 2017 - 13:11

Dat lijkt me inderdaad niet, nee.

 

Kun je met een linux commandline overweg? Zo ja, wil je dan even voor ons testen?


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: xsarius revo 4k #9 Stefan

  • Senior Member
  • 1,491 posts

+57
Good

Posted 31 March 2017 - 13:45

Het kan wel zo zijn maar elke andere image die ik getest heb met mijn Vu solo 4k speelt alles probleemloos af behalve PLI.


VU solo 4k ,twin satelliet tuner en 1 kabel tuner en VU solo se v2 ,dual kabel tuner...E85 Maximum multi focus schotel en een Triax 88cm schotel met een 2 way Triax lnb rail....5.0w 0.8w 4.8e 9.0e 13e 19.2e 23.5e 28.2e....VTI 14.0.5 - 6 Inverto black ultra twin lnb's en 2 Alps twin lnb's, Nvidia shield tv.

Re: xsarius revo 4k #10 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,468 posts

+824
Excellent

Posted 31 March 2017 - 17:57

Onder het motto "meten is weten", dan moet er dus gedebugd worden.

 

Inloggen op de box, en dan

init 4
ENIGMA_DEBUG_LVL=4 /usr/bin/enigma2

nadat Enigma weer is opgestart zo'n media file proberen af te spelen, de log daarvan knippen en hier plakken.

 

Eens gedaan in het menu kiezen voor "restart enigma", en dan als je de prompt weer terug hebt

init 3
exit

intikken om weer terug te gaan naar standaard operatie... 


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: xsarius revo 4k #11 Erik Slagter

  • PLi® Core member
  • 45,353 posts

+498
Excellent

Posted 31 March 2017 - 20:30

mediainfo...
* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: xsarius revo 4k #12 catastrofus

  • Senior Member
  • 2,555 posts

+30
Good

Posted 31 March 2017 - 20:37

Die eerste stap snap ik:

- init 4

- enigma2 in debug starten

 

Maar daarna:

- restart enigma2?

- init 3?

- exit?

 

Is het niet:

- Huidige debug-sessie enigma2 afbreken met ^C

- init 3

 

Het zal wel aan de vrijdag(avond borrel) liggen dat ik dat niet snap... :)

 

Onder het motto "meten is weten", dan moet er dus gedebugd worden.

 

Inloggen op de box, en dan

init 4
ENIGMA_DEBUG_LVL=4 /usr/bin/enigma2

nadat Enigma weer is opgestart zo'n media file proberen af te spelen, de log daarvan knippen en hier plakken.

 

Eens gedaan in het menu kiezen voor "restart enigma", en dan als je de prompt weer terug hebt

init 3
exit

intikken om weer terug te gaan naar standaard operatie... 


Sorry, I'm a member of the "react above quote" community! :ph34r:

2 x et10k (CCCS. PLi-7.0) met een Synology ds214+ (2 x 6 TB) ziggo oost (voormalig @Home) + A1/A2/A3/HB (TechniSat)
 


Re: xsarius revo 4k #13 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,468 posts

+824
Excellent

Posted 1 April 2017 - 10:56

Als je ctrl-C gebruikt dan kun je potentieel een niet-nette afsluiting krijgen, en data verliezen. Als je uit het menu "restart enigma" kiest, dan sluit Enigma altijd netjes af.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: xsarius revo 4k #14 fenzo

  • Senior Member
  • 212 posts

+6
Neutral

Posted 1 April 2017 - 12:02

ik zal vandaag openPLi er opniuw opzttten en dan de log maken.

ik zet deze daarna hier neer.

Ik wil best media info erop loslaten, maar zoals ik al zij..zelfs een simpel mp3 muziek bestandje wordt niet afgespeeld.



Re: xsarius revo 4k #15 fenzo

  • Senior Member
  • 212 posts

+6
Neutral

Posted 1 April 2017 - 12:59

waar vind ik het log bestand?



Re: xsarius revo 4k #16 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,468 posts

+824
Excellent

Posted 1 April 2017 - 13:06

Als je mijn instructies volgt, dan loopt dat over het console. De meeste terminal programma's hebben wel een optie om dat naar een bestand op te slaan. Of anders copy/paste naar notepad of zo.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: xsarius revo 4k #17 fenzo

  • Senior Member
  • 212 posts

+6
Neutral

Posted 1 April 2017 - 14:08

ok de log bij afspelen mp3 (wat niet afspeelt)

 

action ->  InfobarActions showMovies
[eDVBServicePlay] timeshift
[gAccel] alloc failed
 
[gSurface] ERROR: accelAlloc failed
action ->  OkCancelActions ok
[eDVBServicePlay] timeshift
playing 4097:0:0:0:0:0:0:0:0:0:/media/net/downloads/complete/Radio 538 JaarMix 2016/Radio 538 JaarMix 2016.mp3
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:10E0:418:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:10E0:418:1:C00000:0:0:0:
[eDVBServicePlay] timeshift
[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok
[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP  ok
[eDVBVideo0] VIDEO_STOP ok
[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP ok
[eDVBAudio0] DEMUX_STOP ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] destroy
[eDVBText0] DEMUX_STOP ok
TuxTxt stopped service 28
[eDVBText0] destroy
cleaning up
TuxTxt cache cleared
[eDVBResourceManager] start release channel timer
[eServiceMP3] construct!
[eServiceMP3] playbin uri=file:///media/net/downloads/complete/Radio%20538%20JaarMix%202016/Radio%20538%20JaarMix%202016.mp3
[eServiceMP3] starting pipeline
[eServiceMP3] state transition NULL -> READY
[eServiceMP3] Gstreamer error: The autoaudiosink element is not working. (4) from playsink
[eServiceMP3] Gstreamer error: GStreamer encountered a general stream error. (1) from mpegaudioparse2
[DVBCAHandler] no more services
[eDVBResourceManager] release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x2b69260
[eEPGCache] remove channel 0x2b69260
[eDVBResourceManager] stop release channel timer
[eDVBFrontend] close frontend 0
action ->  OkCancelActions cancel
[eServiceMP3] stop /media/net/downloads/complete/Radio 538 JaarMix 2016/Radio 538 JaarMix 2016.mp3
[eServiceMP3] stop state:READY pending:PLAYING ret:FAILURE
[eDVBDB] getBouquet failed.. no path given!
[eServiceMP3] destruct!
playing 1:0:1:10E0:418:1:C00000:0:0:0:
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 0418:0001
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 9763
[eDVBFrontend] opening frontend 0
[eDVBFrontend] (0)tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 9763
[eDVBSatelliteEquipmentControl] Entry for 19,2? not in Rotor Table found... i try gotoXX?
[eDVBSatelliteEquipmentControl] siteLatitude = 51.311001, siteLongitude = 3.853000, 19.200000 degrees
[eDVBSatelliteEquipmentControl] PolarmountHourAngle=163.078137
[eDVBSatelliteEquipmentControl] RotorCmd = e10e
[eDVBSatelliteEquipmentControl] RotorCmd e10e, lastRotorCmd e10e
[eDVBFrontend] prepare_sat System 0 Freq 11185000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
[eDVBFrontend] tuning to 1435 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:10E0:418:1:C00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBFrontend] set static current limiting
[eDVBFrontend] setVoltage 1
[eDVBFrontend] sleep 10ms
[eDVBFrontend] set sequence pos 3
[eDVBFrontend] update current switch params
[eDVBFrontend] startTuneTimeout 5000
[eDVBFrontend] setFrontend 1
[eDVBFrontend] setting frontend 0
[eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend] sleep 500ms
[eDVBFrontend] (0)fe event: status 1d, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2b87c98 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=20
[eEPGCache] channel 0x2b87c98 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eEPGCache] next update in 53 min
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 020d, and the text pid is 0028
[eDVBChannel] getDemux cap=01
TuxTxt cache cleared
[eTSMPEGDecoder] decoder state: play, vpid=020d, apid=007a
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x020d ok
[eDVBPCR0] DEMUX_START ok
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x007a ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 0 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x020d ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBText0] DMX_SET_PES_FILTER pid=0x0028 ok
[eDVBText0] DEMUX_START ok
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 28
TuxTxt running thread...(028)
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] starting PES reader on pid=0028
[eDVBPESReader] DMX_SET_PES_FILTER pid=0028
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
[eDVBCAService] new service 1:0:1:10E0:418:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:10E0:418:1:C00000:0:0:0:
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBFrontend] set dynamic current limiting
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 720x576 aspect 3
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 0844 for service_id 10e0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2116
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[Dish] tuning failed
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 020d, and the text pid is 0028
[eTSMPEGDecoder] decoder state: play, vpid=020d, apid=007a
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2116
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=8020
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=32
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2116
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=96
[eDVBServicePMTHandler] sdt update done!
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
[eDVBChannel] getDemux cap=00
action ->  InfobarActions showMovies
[eDVBServicePlay] timeshift
[gAccel] alloc failed
 
[gSurface] ERROR: accelAlloc failed
action ->  OkCancelActions ok
[eDVBServicePlay] timeshift
playing 4097:0:0:0:0:0:0:0:0:0:/media/net/downloads/complete/Radio 538 JaarMix 2016/Radio 538 JaarMix 2016.mp3
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:10E0:418:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:10E0:418:1:C00000:0:0:0:
[eDVBServicePlay] timeshift
[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok
[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP  ok
[eDVBVideo0] VIDEO_STOP ok
[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP ok
[eDVBAudio0] DEMUX_STOP ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] destroy
[eDVBText0] DEMUX_STOP ok
TuxTxt stopped service 28
[eDVBText0] destroy
cleaning up
TuxTxt cache cleared
[eDVBResourceManager] start release channel timer
[eServiceMP3] construct!
[eServiceMP3] playbin uri=file:///media/net/downloads/complete/Radio%20538%20JaarMix%202016/Radio%20538%20JaarMix%202016.mp3
[eServiceMP3] starting pipeline
[eServiceMP3] state transition NULL -> READY
[eServiceMP3] Gstreamer error: The autoaudiosink element is not working. (4) from playsink
[eServiceMP3] Gstreamer error: GStreamer encountered a general stream error. (1) from mpegaudioparse2
[DVBCAHandler] no more services
[eDVBResourceManager] release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x2b69260
[eEPGCache] remove channel 0x2b69260
[eDVBResourceManager] stop release channel timer
[eDVBFrontend] close frontend 0
action ->  OkCancelActions cancel
[eServiceMP3] stop /media/net/downloads/complete/Radio 538 JaarMix 2016/Radio 538 JaarMix 2016.mp3
[eServiceMP3] stop state:READY pending:PLAYING ret:FAILURE
[eDVBDB] getBouquet failed.. no path given!
[eServiceMP3] destruct!
playing 1:0:1:10E0:418:1:C00000:0:0:0:
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 0418:0001
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 9763
[eDVBFrontend] opening frontend 0
[eDVBFrontend] (0)tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 9763
[eDVBSatelliteEquipmentControl] Entry for 19,2? not in Rotor Table found... i try gotoXX?
[eDVBSatelliteEquipmentControl] siteLatitude = 51.311001, siteLongitude = 3.853000, 19.200000 degrees
[eDVBSatelliteEquipmentControl] PolarmountHourAngle=163.078137
[eDVBSatelliteEquipmentControl] RotorCmd = e10e
[eDVBSatelliteEquipmentControl] RotorCmd e10e, lastRotorCmd e10e
[eDVBFrontend] prepare_sat System 0 Freq 11185000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
[eDVBFrontend] tuning to 1435 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:10E0:418:1:C00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBFronte


Re: xsarius revo 4k #18 fenzo

  • Senior Member
  • 212 posts

+6
Neutral

Posted 1 April 2017 - 14:23

iets teveel info geloof ik :(



Re: xsarius revo 4k #19 Frenske

  • Forum Moderator
    PLi® Core member
  • 22,176 posts

+200
Excellent

Posted 1 April 2017 - 15:49

Vaak is het handiger als je het opgeslagen logfile als bijlage toevoegt. Dat scheelt lappen aan data en degene die de data wilt lezen die kan dat gewoon doen door de bijlage te openen.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: xsarius revo 4k #20 WanWizard

  • Forum Moderator
    PLi® Core member
  • 48,468 posts

+824
Excellent

Posted 1 April 2017 - 17:52

Dit lijkt me duidelijk:

[eServiceMP3] Gstreamer error: The autoaudiosink element is not working. (4) from playsink
[eServiceMP3] Gstreamer error: GStreamer encountered a general stream error. (1) from mpegaudioparse2

Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users