139 replies to this topic

[WanWizard]

That is probably the quickest fix, yes.

 

Having said that, our buildservers still run 18.04, and they have no problem building 7.x, 8.x or develop.

[thmls]

Hello i try to make image with Ubuntu 18,4 and i have this error

ERROR:  OE-core's config sanity checker detected a potential misconfiguration.
    Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
    Following is the list of potential problems / advisories:

    Your Python 3 is not a full install. Please install the module distutils.sysconfig (see the Getting Started guide for further information).

with this command

$ sudo apt install sed wget cvs subversion git-core coreutils unzip texi2html texinfo docbook-utils gawk python-pysqlite2 diffstat help2man make gcc build-essential g++ desktop-file-utils chrpath default-jre gettext zip
$ mkdir ~/OpenPLi
$ cd ~/OpenPLi
$ git clone https://github.com/OpenPLi/openpli-oe-core.git
$ cd openpli-oe-core
$ MACHINE=gbtrio4k make image

Edited by thmls, 19 March 2023 - 14:59.

[Huevos]

It says distutils is not present, so install it.

[40H3X]

..and if I may add, @thmls you also forgot to select the branch to build from and Install the required submodules, so please read https://wiki.openpli..._your_own_build

[Tech]

..and if I may add, @thmls you also forgot to select the branch to build from and Install the required submodules, so please read https://wiki.openpli..._your_own_build

It is not mandatory to specify a branch,  the default branch (which is develop at this time for openpli-oe-core) will be chosen automatically.

[thmls]

I deleted everything and gave the commands from wiki but I have the same error

 

terminal

[rantanplan]

sudo apt install -y autoconf automake bison bzip2 cvs default-jre diffstat flex g++ gawk gcc gettext git git-lfs gzip help2man make ncurses-bin lib32ncurses-dev libc6-dev libtool lz4 texinfo patch perl pkg-config subversion tar texi2html zlib1g-dev chrpath libxml2-utils xsltproc libglib2.0-dev python3-setuptools libc6-i386 genromfs guile-2.2-libs quilt zstd

 

 

[thmls]

sudo apt install -y autoconf automake bison bzip2 cvs default-jre diffstat flex g++ gawk gcc gettext git git-lfs gzip help2man make ncurses-bin lib32ncurses-dev libc6-dev libtool lz4 texinfo patch perl pkg-config subversion tar texi2html zlib1g-dev chrpath libxml2-utils xsltproc libglib2.0-dev python3-setuptools libc6-i386 genromfs guile-2.2-libs quilt zstd

athanasios@athanasios-H55M-UD2H:~$ sudo apt install -y autoconf automake bison bzip2 cvs default-jre diffstat flex g++ gawk gcc gettext git git-lfs gzip help2man make ncurses-bin lib32ncurses-dev libc6-dev libtool lz4 texinfo patch perl pkg-config subversion tar texi2html zlib1g-dev chrpath libxml2-utils xsltproc libglib2.0-dev python3-setuptools libc6-i386 genromfs guile-2.2-libs quilt zstd
[sudo] password for athanasios:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package lz4 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Unable to locate package lib32ncurses-dev
E: Package 'lz4' has no installation candidate
athanasios@athanasios-H55M-UD2H:~$


 

[rantanplan]

lib32ncurses5-dev

Yes, you still have Ubuntu 18 and I have actually shown Depends from 20 upwards.
But if you search a little under Ubuntu, you will find this too.
If you want to build an image you have to deal with the system a little more anyway.

Conflicts also arise from time to time for other reasons.
 

[40H3X]

 

..and if I may add, @thmls you also forgot to select the branch to build from and Install the required submodules, so please read https://wiki.openpli..._your_own_build

It is not mandatory to specify a branch,  the default branch (which is develop at this time for openpli-oe-core) will be chosen automatically.

 

[frankviana]

Hello!

 

I'm back again.

 

Fresh installation (Ubuntu 22)

 

48 threads.

 

See:

 

 Captura de tela de 2023-04-05 22-34-32.png   448.44KB   0 downloads

 

 Captura de tela de 2023-04-05 22-35-27.png   307.7KB   0 downloads

 

 Captura de tela de 2023-04-05 22-40-36.png   593.63KB   0 downloads

 

 Captura de tela de 2023-04-05 22-42-27.png   490.05KB   0 downloads

 

 Captura de tela de 2023-04-05 22-42-52.png   525.6KB   0 downloads

 

 

Frank

==============

 

 

 

 

[frankviana]

My PC Dual CPU for try to compile some image tests (tvheadend, CoreElec/LibreElec, oscam, etc...)

 

 

 WhatsApp Image 2023-04-05 at 22.56.35.jpeg   153.49KB   0 downloads

 

 

 WhatsApp Image 2023-04-05 at 22.56.36.jpeg   159.12KB   0 downloads

[frankviana]

| collect2: error: ld returned 1 exit status
| make[1]: *** [Makefile:759: libcrypto.so] Error 1
| make[1]: Leaving directory '/home/frank/OpenPLi/openpli-oe-core/build/tmp/work/armv7vehf-neon-vfpv4-oe-linux-gnueabi/openssl/1.1.1n-r0/build'
| make: *** [Makefile:178: all] Error 2
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: ExecutionError('/home/frank/OpenPLi/openpli-oe-core/build/tmp/work/armv7vehf-neon-vfpv4-oe-linux-gnueabi/openssl/1.1.1n-r0/temp/run.do_compile.1576619', 1, None, None)
ERROR: Task (/home/frank/OpenPLi/openpli-oe-core/openembedded-core/meta/recipes-connectivity/openssl/openssl_1.1.1n.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1469 tasks of which 1444 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/frank/OpenPLi/openpli-oe-core/openembedded-core/meta/recipes-connectivity/openssl/openssl_1.1.1n.bb:do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [Makefile:131: image] Erro 1
frank@frank-X99:~/OpenPLi/openpli-oe-core$

[serdeliuk]

| collect2: error: ld returned 1 exit status
| make[1]: *** [Makefile:759: libcrypto.so] Error 1
| make[1]: Leaving directory '/home/frank/OpenPLi/openpli-oe-core/build/tmp/work/armv7vehf-neon-vfpv4-oe-linux-gnueabi/openssl/1.1.1n-r0/build'
| make: *** [Makefile:178: all] Error 2
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: ExecutionError('/home/frank/OpenPLi/openpli-oe-core/build/tmp/work/armv7vehf-neon-vfpv4-oe-linux-gnueabi/openssl/1.1.1n-r0/temp/run.do_compile.1576619', 1, None, None)
ERROR: Task (/home/frank/OpenPLi/openpli-oe-core/openembedded-core/meta/recipes-connectivity/openssl/openssl_1.1.1n.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1469 tasks of which 1444 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/frank/OpenPLi/openpli-oe-core/openembedded-core/meta/recipes-connectivity/openssl/openssl_1.1.1n.bb:do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [Makefile:131: image] Erro 1
frank@frank-X99:~/OpenPLi/openpli-oe-core$

It seems that the real error is a bit higher in the terminal buffer, you need to check the whole thing, maybe use a pastebin and put there the whole output, however, will help to let us know OS/version and which openpli version you are trying to build

[frankviana]

Ok.

 

Here: https://pastebin.com/gm258vpf

 

 

I think is only for "homebuild" when insert this option only "MACHINE=osmini4k make image".

 

 

Thx.

Edited by frankviana, 6 April 2023 - 10:51.

[serdeliuk]

Ok.

 

Here: https://pastebin.com/gm258vpf

 

 

I think is only for "homebuild" when insert this option only "MACHINE=osmini4k make image".

 

 

Thx.

I think your OS is not compatible with build environment reqiured

`NATIVELSBSTRING = "ubuntu-22.04"`

 

Check following post

https://forums.openp...dpost&p=1508634

[frankviana]

 

Ok.

 

Here: https://pastebin.com/gm258vpf

 

 

I think is only for "homebuild" when insert this option only "MACHINE=osmini4k make image".

 

 

Thx.

I think your OS is not compatible with build environment reqiured

`NATIVELSBSTRING = "ubuntu-22.04"`

 

Check following post

https://forums.openp...dpost&p=1508634

 

Ok.

 

I have other ssd here for this tests, then I'll install 18.04 version

 

Thx.

[neo]

48 threads.

 

You can get a lot more, by default bitbake sets both BB_NUM_THREADS and PARALLEL_MAKE to the number of cores available.

Edited by neo, 6 April 2023 - 12:27.

[neo]

I think your OS is not compatible with build environment reqiured

`NATIVELSBSTRING = "ubuntu-22.04"`

 

For develop not a problem, we are in the process of upgrading our buildservers to 22.04, and develop builds fine.

 

You'll have to check the log to see what exactly the compile error is, the information you posted does not contain that error.

[frankviana]

How do I limit RAM memory? The computer crashes after a while as it uses all the memory. When all processor is used, all memory is also used, causing freeze.

 

See:

 

 

 Captura de tela de 2023-04-07 16-32-34.png   619.15KB   3 downloads

 

 

Thx

Edited by frankviana, 7 April 2023 - 20:36.