Possible to make this image for Gigablue UHD Quad 4K?
We are in disussion with Gigablue. But the initiative has to come from the manufacturer, not from us.
Posted 9 July 2017 - 12:37
Possible to make this image for Gigablue UHD Quad 4K?
We are in disussion with Gigablue. But the initiative has to come from the manufacturer, not from us.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 9 July 2017 - 19:05
Anybody with a VU+ Solo 4K and Scandinavian Canal Digital card tested this image?
Did it myself no. Installed image, yes to restore setting, installed OSCAM, and everything ok!
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Posted 10 July 2017 - 11:33
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 10 July 2017 - 11:39
Edited by Stan, 10 July 2017 - 11:44.
Posted 10 July 2017 - 12:44
1. I also experienced the missing OSD when I was installing the image from NAS using the "Automatic Full Backup" plugin. I could not see the install wizard (language selection, etc.), only the boot logo.
-> When restore-settings.sh and autoinstall.sh is used you do not see a wizard. Try to install without using full backup.... After the image is flashed you see after the first boot shortly a message box where you can select 'No' for setting-restore/auto install. Then you should see the install wizard.
2. I have just selected another UI language and after the recommended restart of E2 there is again no OSD on TV.
->After changing the language the UI should restart...
3. The behaviour of the Exit button is not saved.
->What do you mean...
4. Some media files cannot be paused (mp3, flac...), they just stop.
-> It seems Extrend may have some driver related issue regards mp3/flac
It might be you have issues with the OSD due to a backup restored e.g. from a foreign image....
Edited by littlesat, 10 July 2017 - 12:52.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 10 July 2017 - 13:40
ok it depends of cpu & gpu power. thanksThere are also dvb-t2 boxes available which can playback h265 with max full hd. E.g. Os mini plus. So not necessarily 4K boxes only.
And yes, your formuler can't do it.
No, the GPU isn't used for this. Neither is the CPU. It's the dedicated DVB hardware in the SoC.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 10 July 2017 - 13:41
Another thing that occurs with 6.0rc: Sometimes the OSD goes missing from the TV set. (no volume bar, no menues...) And it won't re-appear unless E2 is restarted. In the WEB interface everything is still visible.
Can you check the driver version? The last driver update for the Xtrends 1gen and 2gen wasn't really an improvement...
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 10 July 2017 - 13:49
ET9000 driver version 3.8.7+20130524-r0.0
I suppose it is the same as used in OpenPli 4.0.
@littlesat
Posted 10 July 2017 - 14:31
it's a known issue (for me at least) - had this on my et9500 since some OE update last year on openpli5 / develop images:
I have (possibly related?) GUI issue with et9500 + overscan wizzard + openpli5
after using overscan wizzard GUI disappears from tv (immediately or on the next reboot/e2 restart)
however in openwebif when I grab a screenshot it is still present
to restore the GUI on tv I need to:
1) perform a cold boot, or
2) from openwebif run overscan wizzard again
tested also on et9500 running openpli4 and this problem didn't occur (although overscan screen was displyed under some semi-transparent layer /?/)
on vuzero/openpli5 - no problem
looks like a driver in connection with some updated OE package (gcc5 most probably?) issue,
I was able to easily trigger this using overscan test screen,
you can test this: when your osd is missing, run overscan wizard using openwebif remote and voilà, osd is back...
for me the problem was that overscan apparently tended to re-appear spontaneously after e2/box restart from time to time, hence osd randomly got lost, so I just uninstalled videotune plugin, and that helped...
Posted 10 July 2017 - 15:38
t's a known issue (for me at least) - had this on my et9500 since some OE update last year on openpli5 / develop images:
[...]
looks like a driver in connection with some updated OE package (gcc5 most probably?) issue,
I was able to easily trigger this using overscan test screen,
you can test this: when your osd is missing, run overscan wizard using openwebif remote and voilà, osd is back...
for me the problem was that overscan apparently tended to re-appear spontaneously after e2/box restart from time to time, hence osd randomly got lost, so I just uninstalled videotune plugin, and that helped...
You are right, the overscan wizard brings back the OSD.
However, uninstalling the videotune plugin does not make any difference. The problem persists.
Posted 10 July 2017 - 15:43
You need to solve it with a setting on your TV... not your E2 box....
You are right, the overscan wizard brings back the OSD.
However, uninstalling the videotune plugin does not make any difference. The problem persists.
Edited by littlesat, 10 July 2017 - 15:43.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
0 members, 5 guests, 0 anonymous users