820 replies to this topic

[zebulon7]

Thank's

[WanWizard]

.py files belong to -src packages as we have this before, You need to manage it in your oe I assume

 

Agreed, on both counts.

[Type-R]

But then you can make a bkp of settings and plugins OpnePLI 4 and then load them on 6 ??? I can not, the bkp of 4 then takes my 6 from the decoder

[fankoosh]

First:
https://wiki.openpli...aks#Menu_Levels
change setup mode to expert then search for skin selection under audio/video tab.

Ok thanx

I always use backupsuite. any problems with it? I havent used backup suite yet, with opli rc6.0.

Backupsuit works ok with openpli6 I backup the image with git141

[WanWizard]

But then you can make a bkp of settings and plugins OpnePLI 4 and then load them on 6 ??? I can not, the bkp of 4 then takes my 6 from the decoder

 

If you restore a full backup using BackupSuite, you restore the entire image, not just the settings.

 

If you restore a backup made by the autobackup plugin (with autoinstall enabled), you can restore your 4 config without issues. But note that some defaults have changed, so you might have to tweak it a bit after the restore.

[Pedro_Newbie]

I always use backupsuite. any problems with it? I havent used backup suite yet, with opli rc6.0.

 

It works, but..... with some small error messages on a Mutant HD51.

The errors are:

tar: ./var/lib/samba/private/msg.sock/1691: socket ignored
tar: ./var/lib/samba/private/msg.sock/30667: socket ignored
tar: ./var/lib/samba/private/msg.sock/1689: socket ignored
tar: ./var/lib/samba/private/msg.sock/1697: socket ignored
tar: ./var/lib/samba/private/msg.sock/1696: socket ignored

It is (I think) pure cosmetic because after a restore the files are recreated

The BackupSuite produces a working backup. I've only tested on a Mutant HD51

 

Maybe an Openpli dev can elaborate about these errors?

[honda-civic]

All ok people from Team..... just change already once that skin...

Fresh wind a bring not black night as always...

etwas modern ...

[Moonwalker]

What is required for new dreambox models to be supported by Openpli? I was talking to a supplier and he may forward request to them.

[usingen]

Formuler F1 with PLI6: not working HBBTV. Installed without error from feeed. Do you known this bug ?

 

After pres red button (on channel with HbbTV service) on display by Former F1 is info about running plugin for HbbTV and then receiver is blocked. I must hardly reboot receiver.

[betacentauri]

It works, but..... with some small error messages on a Mutant HD51.
The errors are:

tar: ./var/lib/samba/private/msg.sock/1691: socket ignored
tar: ./var/lib/samba/private/msg.sock/30667: socket ignored
tar: ./var/lib/samba/private/msg.sock/1689: socket ignored
tar: ./var/lib/samba/private/msg.sock/1697: socket ignored
tar: ./var/lib/samba/private/msg.sock/1696: socket ignored

It is (I think) pure cosmetic because after a restore the files are recreated
The BackupSuite produces a working backup. I've only tested on a Mutant HD51

Maybe an Openpli dev can elaborate about these errors?

Ignore these errors. It's normal. Tar will not backup socket files. These files will be regenerated from e2 or other software when they are not present.

[Pedro_Newbie]

I already thought this was of no importance but I wasn't completely sure. I can try to suppress these errors when I have more time but not in the near future I'm afraid.

[Frenske]

What is required for new dreambox models to be supported by Openpli? I was talking to a supplier and he may forward request to them.

Hi, the request for getting support should be made by the manufacturer and not by us. In case Dream sents a request to chairman@openpli.org we will always give a proper reply. And then it's up to the manufacturer how to deal with our wish list. It's as simple as that.

[santaclaus]

Congratulations to all very good ¡¡¡¡ 

[Type-R]

 

But then you can make a bkp of settings and plugins OpnePLI 4 and then load them on 6 ??? I can not, the bkp of 4 then takes my 6 from the decoder

 

If you restore a full backup using BackupSuite, you restore the entire image, not just the settings.

 

If you restore a backup made by the autobackup plugin (with autoinstall enabled), you can restore your 4 config without issues. But note that some defaults have changed, so you might have to tweak it a bit after the restore.

 

Thanks!

[Erik Slagter]

What? .exe files on the box? WTF?

wininst-7.1.exe: PE32 executable (GUI) Intel 80386, for MS Windows

[Erik Slagter]

 

I always use backupsuite. any problems with it? I havent used backup suite yet, with opli rc6.0.

 

It works, but..... with some small error messages on a Mutant HD51.

The errors are:

tar: ./var/lib/samba/private/msg.sock/1691: socket ignored
tar: ./var/lib/samba/private/msg.sock/30667: socket ignored
tar: ./var/lib/samba/private/msg.sock/1689: socket ignored
tar: ./var/lib/samba/private/msg.sock/1697: socket ignored
tar: ./var/lib/samba/private/msg.sock/1696: socket ignored

It is (I think) pure cosmetic because after a restore the files are recreated

The BackupSuite produces a working backup. I've only tested on a Mutant HD51

 

Maybe an Openpli dev can elaborate about these errors?

Yes, you're not supposed to tar sockets. Won't work anyway. It's like trying to pack your letter box into your suit case and expecting to receiver letters there while you're on vacation

[Erik Slagter]

What is required for new dreambox models to be supported by Openpli? I was talking to a supplier and he may forward request to them.

Open source enigma2 for a start

[Sharp987]

Thanks for the wonderful image OpenPLi6.0

I installed it on the flash and then installed plugin OpenMultiboot.
All the images installed previously with the plugin work without any problems.
Basically I use a Vu+Ultimo4k receiver.
I have a lot of questions about the image of what works on it and what it is supposed to complement.
About plugins to me again does not work hbbtv plugin and multiquickbutton (2.7)
From my Vu + zero I've got the Quickbutton plugin that works without any problems, but it is not available in the dounloadable new plugin.

As I try to make skins, my main questions are related to skins, but I do not know if this topic is the place
to be discussed.
I started to update my skin AeonFHDmod and for now I have a strange problem:
In the expert setting menu (which is new) the scrollbar appears when I exit one of the submenus.
There is no problem when I entering the menu. See pictures 1 and 2:
This happens even though I've set up in all the similar menus: ... scrollbarMode = "showNever" ...

Thanks.

Attached Files

•  1.jpg   67.97KB   13 downloads
•  2.jpg   69.51KB   13 downloads

[Pedro_Newbie]

Yes, you're not supposed to tar sockets. Won't work anyway. It's like trying to pack your letter box into your suit case and expecting to receiver letters there while you're on vacation

It is remarkable that now these errors are being reported and on Openpli 4 not, is Samba that much changed?

[arnask]

Why if i want to play UHD video files on ULTIMO 4k there is sound, but there is no video?

Video
ID/String : 1
Format : AVC
Format/Info : Advanced Video Codec
Format_Profile : High@L5.1
Format_Settings_CABAC/String : Yes
Format_Settings_RefFrames/String : 5 frames
CodecID : V_MPEG4/ISO/AVC
Duration/String : 1 h 11 min
BitRate/String : 52.4 Mb/s
Width/String : 3 840 pixels
Height/String : 2 160 pixels
DisplayAspectRatio/String : 16:9
FrameRate_Mode/String : Constant
FrameRate/String : 23.976 (24000/1001) FPS
ColorSpace : YUV
ChromaSubsampling/String : 4:2:0
BitDepth/String : 8 bits
ScanType/String : Progressive
Bits-(Pixel*Frame) : 0.263
StreamSize/String : 26.0 GiB (99%)
Encoded_Library/String : x264 core 148 r2638 7599210
Encoded_Library_Settings : cabac=1 / ref=5 / deblock=1:-3:-3 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=48 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=12 / lookahead_threads=2 / sliced_threads=0 / nr=0 / decimate=0 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=8 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=60 / rc=crf / mbtree=1 / crf=17.0 / qcomp=0.70 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=1:0.70
Default/String : Yes
Forced/String : No