Hey Willy A big thanks i did the full update of 4 and it's great all sorted now thanks
Update of the XMLTV sources
Re: Update of the XMLTV sources #161
Re: Update of the XMLTV sources #162
Re: Update of the XMLTV sources #163
Re: Update of the XMLTV sources #164
Posted 19 November 2017 - 19:57
Hi,
Is there an ipk file available for epgimport? I need to update it but the plugin downloads are not working on my box.
Thanks
Mike
Hello!
I had to update my OpenMB 5 manually recently.
I found this on a forum (community) related to your VU+-box: enigma2-plugin-extensions-xmltvimport_1.0+git124+a64fbeb-r0.0_mips32el.ipk
I'm not shure if the rules of this forum allows me to link directy to that site.
I had a hard time to get it working. gz-files did work fine but everytime i tried to import xz-files, the box "hung" with a spinner in the left upper corner. I tried to fiddle with channel and source-files, but no luck.
After i updated Libc6 to version 2.25 it started to work :-). Did not work with 2.24!
Remember to update rytec.sources.xml because it was outdated in the package I installed.
The xmltvimport-ipk is depending on other packages. At least these versions: python-lzma_0.0.8-r0.0_mips32el.ipk, liblzma5_5.2.2-r0_mips32el.ipk, and libc6_2.25-r0_mips32el.ipk (if mips32el is your box-architecture)
Regards
Johan
OpenPLi 8.1, Miraclebox Twin+ 2xDVB-T2
Re: Update of the XMLTV sources #165
Posted 16 December 2017 - 09:55
Hi Willy
Sorry bothering you again but something must had changed the Vodafone Greece epg I am grabbing using my Synology NAS.
Can you please check the siteini files if are working for you or they need some changes?
I could not upload the vodafone.gr.ini file ( forum would not allowed to do so .. I don't know why )
Thank you in advance
Attached Files
Edited by leotzian1, 16 December 2017 - 09:56.
Re: Update of the XMLTV sources #166
Posted 16 December 2017 - 10:13
Indeed.
It is not grabbing here also.
Will try to correct it.
Willy
PS: if you cannot upload a file, try zipping it
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: Update of the XMLTV sources #167
Posted 16 December 2017 - 10:24
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: Update of the XMLTV sources #168
Posted 16 December 2017 - 11:09
Oh yes this is the problem.. I don't know what had happened to vodafone, perhaps they will fix it.
So that means that If I switch to your sources I will have the same problem
I ask you so because I switched from my sources from my NAS to rytec and no guide
Am I correct?
Thanks Willy
Edited by leotzian1, 16 December 2017 - 11:12.
Re: Update of the XMLTV sources #169
Re: Update of the XMLTV sources #170
Posted 16 December 2017 - 16:06
Willy a very strange problem with Cyta I tried to replace untill vodafone had fixed the epg
On the site the guide is correct when I try to grab the first day is correct and after there is guide from other channels can you check please the below?
Check Discovery today is correct and tomorrow 17 December it says "Euronews Weekend" all the day and the other days 18, 19 other channels
Very crazy I use the below from siteini file and the xmltv_id I had corrected according to my reciever channels
<channel update="i" site="cyta.com.cy" site_id="Discovery channel" xmltv_id="discovery.gr">Discovery channel</channel>
<channel update="i" site="cyta.com.cy" site_id="Discovery Science" xmltv_id="DiscoveryScience.gr">Discovery Science</channel>
<channel update="i" site="cyta.com.cy" site_id="Animal Planet" xmltv_id="animalplanet.gr">Animal Planet</channel>
<channel update="i" site="cyta.com.cy" site_id="IDX" xmltv_id="DiscoveryID.gr">IDX</channel>
<channel update="i" site="cyta.com.cy" site_id="TLC" xmltv_id="TLC.gr">TLC</channel>
I had grabbed the below guide.xml file from those sources
Attached Files
Edited by leotzian1, 16 December 2017 - 16:10.
Re: Update of the XMLTV sources #171
Posted 17 December 2017 - 10:11
I had a look at cyta.
It is a nightmare.
Can't you use http://tvguide.cablenetcy.net/
Willy
Attached Files
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: Update of the XMLTV sources #172
Posted 18 December 2017 - 08:56
Yes, Willy thank you very much it is not in Greek but no problem.
I don't know what is the problem with Cyta, the strange thing is that the guide in the site is correct but when I grab it it is mixed with other channel's guide.
And in cyta's site, the guide for the channels I care for, is in English, best guide for me was Vodafon's I don't know why they had not updated it, I will keep checking the site if they fix it.
Thank you Willy again for your help
Edited by leotzian1, 18 December 2017 - 08:59.
Re: Update of the XMLTV sources #173
Posted 23 December 2017 - 12:56
most of those "missing channels,are also in novagr page
http://www.novaguide...tion=filterList
isn't possible to read them from here?
Re: Update of the XMLTV sources #174
Posted 6 January 2018 - 17:42
Hi everyone, I have a problem with epgimport.
I put the fix that you did, now I download xz file but it remains blocked ([EPGImport] afterDownload /tmp/epgimport.xz) does not decompress it, I'm not sure why it uses lzma to decompress it and my version says "lzma: epgimport.xz: File format not recognized ". (I can not update lzma gives me various errors).
But if I unzip the file with xz (instead of lzma) it decompresses it without problems.
so I ask you if you can have a fix to make sure that epgimport uses xz instead of lzma, thanks.
I have otherwise if there are any alternative links with gz sources to use, thanks.
Greetings.
Re: Update of the XMLTV sources #175
Posted 6 January 2018 - 17:50
Hi,
No need to perform multiple post for the same problem, you already ask it there and you get an answer.
https://forums.openp...e-5#entry823946
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Update of the XMLTV sources #176
Posted 6 January 2018 - 18:03
Hi,
No need to perform multiple post for the same problem, you already ask it there and you get an answer.
https://forums.openp...e-5#entry823946
Pr2
Ah ok, as the fix was released in this post, I thought I should have made the request here to change the fix for my problem. Then I repeat the request in the other post you indicated, thanks.
Greetings.
Re: Update of the XMLTV sources #177
Posted 9 April 2018 - 08:54
Hi,
i use the german basic and common epg files a week now, but since some days, the epg_common.xz (decompressed to xml) contain some xml errors: the end tags of <programme> are missing at the end of the "programme"-block(s) changing to "channel"-block(s) and before the root end tag </tv>.
I hope it is the right forum here and someone is able to correct this or knows the people to announce it to.
Thank you
Re: Update of the XMLTV sources #178
Posted 9 April 2018 - 14:05
Should be OK now.
There was indeed an error in the file (missing closing tags </programme>
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: Update of the XMLTV sources #179
Re: Update of the XMLTV sources #180
Posted 12 April 2018 - 07:55
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users