Posted 23 October 2017 - 18:17
But, we can make the update by the VU+ or it is absolutely necessary to flash totally again ?
And if i use the VU+ will it be the samba problem ?
You can do the update by using the online update of the image. It's not necessary to flash again.
Yes, on VU+ there was same problem as described above, but after the online update samba was fixed.
VU+ Ultimo 4K; Clarke-Tech et9000
Posted 23 October 2017 - 18:43
Ouf !
I was afraid !
In the first update, I lost Samba, but everything returned when I do it a second time.
Ouf !
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 23 October 2017 - 18:53
Like I said... 
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 October 2017 - 08:53
Samba still not works like with OpenPli 4.0, when im trying to transfer fils from desktop to my box it says not emty space.
Posted 24 October 2017 - 09:01
forgot to write that i'm use solo4k
Posted 24 October 2017 - 12:39
So Samba does work? No free space is not a samba issue. What exactly are you trying to do? Copy to where? What is "where" exactly?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 October 2017 - 13:39
Im trying to transfer film from desktop to movie on my box there is 881GB free space.
As i wrote no problem on OpenPli 4.0.
Edited by ricki, 24 October 2017 - 13:40.
Posted 24 October 2017 - 13:57
Im trying to transfer film from desktop to movie on my box there is 881GB free space.
As i wrote no problem on OpenPli 4.0.
How is your box HDD formatted?
If the movie file you're trying to transfer is larger than 4 GB and your HDD is FAT32 formatted, that might be the message you see.
Posted 24 October 2017 - 14:00
Movie is only 2GB
as i wrote no problem on OPenPli 4
Edited by ricki, 24 October 2017 - 14:02.
Posted 24 October 2017 - 14:05
So, a Solo4K with a local HDD? And you are trying to copy a file to the \\box\Harddisk share? Do you actually see the box and the share in Explorer? And if so, can you access the share and do you see the files? Can you access any of the files?
Just want to make sure I know exactly what your situation is before I start guessing...
Is your box up to date? So no OpenPLI 6.0-rc, but OpenPLi 6.0-release? And completely updated (repeat software update until no more are found, then make sure the box is restarted).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 October 2017 - 14:20
I did a new test it works whit al local HDD, but it fails with extern HDD.
Posted 24 October 2017 - 14:56
Define "extern HDD"? A USB disk? A mount from another networked device?
The last is a known problem with the CIFS kernel driver (NFS doesn't seem to have this issue), for the same reason there are issues with playing a recording while still recording it (the size isn't updated).
It's been in the kernel driver for ages, I've got the same issue on my laptop with Fedora, if I want to access my NAS from a VirtualBox VM, problem has been there for a few years.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 October 2017 - 15:24
seagate extern 2.5" 500GB
Posted 24 October 2017 - 15:53
So USB or eSATA?
I don't see any reason why that wouldn't work. I can't reproduce the issue here, both with a USB stick and with a WD Passport 1TB.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 October 2017 - 21:31
I updated yesterday when it was supposedly fixed, but it still didn't work, so back to my backup
Posted 24 October 2017 - 21:33
"it" was fixed? What is "it" in this context, because I don't anyone has said anything about the problem we're discussing.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 25 October 2017 - 16:15
"it" was fixed? What is "it" in this context, because I don't anyone has said anything about the problem we're discussing.
samba
Posted 25 October 2017 - 16:28
What was fixed was
Both not related to the issue described here?
Regarding this issue, there is a German topic open with the same complaint. It seems that if you connect from a Windows client to a Samba share, and you try to access a mountpoint that is located within that share, you can't write to it. This also seems to be true if you connect to the share "Root", and try to write to /tmp (which is also a mountpoint). From a Linux client, there is no problem. I haven't found the time to find a Windows VM I can test with.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 26 October 2017 - 01:30
my problem
with latest openpli I have everytime problem with samba
when I click the link on the pc its not connecting
many times I need reboot to have them working
never had this problem on old openpli versions
seems to have started with 6rc and now on 6 also same issue
before after reboot it usually worked, but after flashing openpli6 and today update to latest version even after restart its not working anymore?
but after update its still not starting so seems stillnot to be started?
Posted 26 October 2017 - 05:09
Do you have a custom configuration? If so, did you restore that from OpenPLi 4?
Can you login and type
ls -l /etc/samba /etc/init.d/samba.sh restart
and post what happens?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 3 guests, 0 anonymous users
