Posted 26 October 2017 - 06:15
Looks this also solves my problem, when I restart Samba on box 1 I can see the share on box 2 again.
/etc/init.d/samba.sh restart
Knipsel.JPG 23.75KB
11 downloads
Knipsel2.JPG 23.03KB
9 downloads
Edited by bril, 26 October 2017 - 06:18.
Mut@ntHD51 STB 4K 2x, Openpli 7.1 release , 60 cm schotel 2x duo-lnb, 19.2/23.5 vaste opstelling, Panasonic TXL55DT50E
Posted 26 October 2017 - 07:39
try to flash simply another time, it has work fine for me.
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 31 October 2017 - 15:54
Upgraded OpenPLi 6 today. After the upgrade Samba doesn't start and I receive the following errors when restarting:
root@vusolo2:~# /etc/init.d/samba.sh restart
Stopping Samba: smbd nmbd.
Waiting for samba processes to die off...
Starting Samba: smbd/usr/sbin/smbd: error while loading shared libraries: libsmbd-base-samba4.so: cannot open shared object file: No such file or directory
nmbd/usr/sbin/nmbd: error while loading shared libraries: libpopt-samba3-samba4.so: cannot open shared object file: No such file or directory
Posted 31 October 2017 - 16:09
Also tried removing samba and reinstall. Didn't work either. Apparently there are packages missing.
Posted 31 October 2017 - 17:20
Also tried removing samba and reinstall. Didn't work either. Apparently there are packages missing.
did you update openpli recently like yesterday or today
the mount was off for me , i did: /etc/init.d/samba.sh restart and it works
Posted 31 October 2017 - 18:20
Also tried removing samba and reinstall. Didn't work either. Apparently there are packages missing.
did you update openpli recently like yesterday or today
the mount was off for me , i did: /etc/init.d/samba.sh restart and it works
I upgraded today - Build 2017-10-30 and this problem came up. As you may notice in my first post on this page. I issued '/etc/init.d/samba.sh and received the error messages I posted. After uninstall/reinstall smb.conf is also missing from /etc/samba
Posted 31 October 2017 - 18:37
try opkg update && opkg install sabma --force-reinstall
then check if you have the samba.conf
also retry to update twice in a row , missing package need to be installed after a reboot
Edited by blunt, 31 October 2017 - 18:41.
Posted 31 October 2017 - 20:44
I did. smb.conf wasn't recreated but manually added it from a post in this forum. Samba now at least start without error and I "see" the box. I cannot access the shares however.
Posted 31 October 2017 - 21:08
also retry to update twice in a row , missing package need to be installed after a reboot
Correct, you may have to update multiple times, thanks to circular dependencies in the samba packages (dependencies that only appear after samba has been installed).
To reinstall, it is better to do
opkg remove samba && opkg install samba
it is not the same as "force-reiinstall", and has less side effects. It will also solve the missing smb.conf issue (that was created in the 15/10 build).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 31 October 2017 - 21:42
also retry to update twice in a row , missing package need to be installed after a reboot
Correct, you may have to update multiple times, thanks to circular dependencies in the samba packages (dependencies that only appear after samba has been installed).
To reinstall, it is better to do
opkg remove samba && opkg install sambait is not the same as "force-reiinstall", and has less side effects. It will also solve the missing smb.conf issue (that was created in the 15/10 build).
Samba works now, sort of, with my manually added smb.conf. Cannot access the shares however. Have tried from computers with windows, macOS and Linux. Same result.
Posted 31 October 2017 - 21:44
How do you try to connect (lets stick to Windows). By name? Using "\\ip-name"? Via network neighborhood? Other?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 31 October 2017 - 22:00
How do you try to connect (lets stick to Windows). By name? Using "\\ip-name"? Via network neighborhood? Other?
Posted 31 October 2017 - 22:01
So you see it, but you can't connect to it? That sounds indeed like some library is missing.
You are sure there is no library update waiting?
opkg update && opkg upgrade
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 31 October 2017 - 22:20
So you see it, but you can't connect to it? That sounds indeed like some library is missing.
You are sure there is no library update waiting?
opkg update && opkg upgrade
Yes, pretty sure! Have reinstalled several times plus /etc/init.d/samba.sh restart. Have also checked that smbd/nmbd runs through "ps"
Posted 31 October 2017 - 22:37
Have you try try to simply flash another time, like i did for the first release, on my vu+Duo2 ?
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 31 October 2017 - 22:38
Hmm...
I don't have a VU+ box here, but I'll try to flash something with 6.0-release first thing tomorrow morning, to see if I can find anything. My main box also runs 6.0-release, which runs fine.
Sorry I can't do it tonight, this old man needs his beauty sleep soon. 
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 31 October 2017 - 23:11
Hmm...
I don't have a VU+ box here, but I'll try to flash something with 6.0-release first thing tomorrow morning, to see if I can find anything. My main box also runs 6.0-release, which runs fine.
Sorry I can't do it tonight, this old man needs his beauty sleep soon.
Don't bother! Made a last attempt and added an extra slash "/" at the end of the file paths as specified in an example at samba.org
After a new restart I was able to access the shares.
Posted 31 October 2017 - 23:14
Oef... Good to hear you've got it sorted, and thanks for the feedback!.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 1 November 2017 - 10:12
For the futures version, should it be possible to create a batch for solve the samba prob's ?
I would like to know too if a second flash will solve it ?
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 1 November 2017 - 11:59
No samba after update, is there a fix?
0 members, 5 guests, 0 anonymous users
