Jump to content


Photo

Glamour Aura FHD skin - first public release canditate (RC3)

glamourskins FHD skin Glamour Aura FHD

  • Please log in to reply
219 replies to this topic

Re: Glamour Aura FHD skin - first public release canditate (RC3) #201 datrkmer

  • New Member
  • 3 posts

0
Neutral

Posted 3 January 2020 - 18:56

Hello, will this skin be available on zgemma h3?

sorry for english >> google translator



Re: Glamour Aura FHD skin - first public release canditate (RC3) #202 mrvica

  • Senior Member
  • 779 posts

+46
Good

Posted 3 January 2020 - 21:58

IMPORTANT NOTE: As stated above, GAFHD is designed to work well ONLY for receivers with a CPU higher than 750Mhz. This is an obligatory limitation due to the high resolution graphical nature of the skin which also makes the package large in size. For receivers with slower CPUs use at your own risk! Also,



Re: Glamour Aura FHD skin - first public release canditate (RC3) #203 cobus

  • Senior Member
  • 3,916 posts

+49
Good

Posted 5 January 2020 - 20:22

When will this skin be available?


Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

XTREND ET10K 3x DVB C/T2  2 x sat (te koop €75)

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Glamour Aura FHD skin - first public release canditate (RC3) #204 Frenske

  • Forum Moderator
    PLi® Core member
  • 22,828 posts

+211
Excellent

Posted 5 January 2020 - 20:56

In Develop it already is. I can’t tell whether it will be possible to add it in the present Release too.

There are others that can give more detailed information regarding adding this skin in Release 7.2.


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: Glamour Aura FHD skin - first public release canditate (RC3) #205 WanWizard

  • Forum Moderator
    PLi® Core member
  • 50,063 posts

+900
Excellent

Posted 5 January 2020 - 22:10

It is already added to the release, so it will be available after the next build.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Glamour Aura FHD skin - first public release canditate (RC3) #206 MCelliotG

  • Senior Member
  • 373 posts

+29
Good

Posted 6 January 2020 - 00:12

Thank you! I already uploaded the other skins privately on my Github, testing the install scripts atm for file clashes.



Re: Glamour Aura FHD skin - first public release canditate (RC3) #207 cobus

  • Senior Member
  • 3,916 posts

+49
Good

Posted 6 January 2020 - 17:22

The skin is great but it doesnt work great on the Vu uno 4k lag on channel change on the Multibox he works great super fast when channel change


Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

XTREND ET10K 3x DVB C/T2  2 x sat (te koop €75)

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Glamour Aura FHD skin - first public release canditate (RC3) #208 MCelliotG

  • Senior Member
  • 373 posts

+29
Good

Posted 7 January 2020 - 01:57

That's quite strange, there was no lag on channel change even on an "old" VuDuo2 I had tested it on! Maybe something else hinders the zap, or you use an older version of my skin?


Edited by MCelliotG, 7 January 2020 - 01:58.


Re: Glamour Aura FHD skin - first public release canditate (RC3) #209 Pr2

  • PLi® Contributor
  • 3,917 posts

+165
Excellent

Posted 8 January 2020 - 08:04

I test the skin on Duo4K and Solo4K and I had no problem.

The problem you have on your Uno4K is perhaps linked with a 3rd party plugin that you install.


Edited by Pr2, 8 January 2020 - 08:05.

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Glamour Aura FHD skin - first public release canditate (RC3) #210 Frenske

  • Forum Moderator
    PLi® Core member
  • 22,828 posts

+211
Excellent

Posted 8 January 2020 - 10:10

I tested this skin earlier and just now again. There is definitely a delay when switching channels. I tested on my Ultimo4k where, besides some default plugins no strange plugins are used. Only autotimer, het weer, youtube and lcd4linux. A picture tells more then 1000 words.

 

https://wetransfer.com/downloads/95ae5a680c695e59d67069e076170fef20200108083332/16d34922c3cc5a0f3ab49656f91d081820200108083332/8c798e


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: Glamour Aura FHD skin - first public release canditate (RC3) #211 cobus

  • Senior Member
  • 3,916 posts

+49
Good

Posted 8 January 2020 - 11:01

I test the skin on Duo4K and Solo4K and I had no problem.

The problem you have on your Uno4K is perhaps linked with a 3rd party plugin that you install.

No i have almost the same plugins as Frenske  Only autotimer, youtube and lcd4linux


Groetjes Cobus R

 

VU+ UNO 4K FBC DVB C  LCD4linux met Samsung SPF 75H

XTREND ET10K 3x DVB C/T2  2 x sat (te koop €75)

MAXYTEC MULTIBOX

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: Glamour Aura FHD skin - first public release canditate (RC3) #212 Pr2

  • PLi® Contributor
  • 3,917 posts

+165
Excellent

Posted 8 January 2020 - 16:48

lcd4linux is probably the culprit it was already identified as a source of problem during zap on VU+ 4K boxes.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Glamour Aura FHD skin - first public release canditate (RC3) #213 Frenske

  • Forum Moderator
    PLi® Core member
  • 22,828 posts

+211
Excellent

Posted 8 January 2020 - 18:18

You could be right but I won’t remove lcd4linux in my Ultimo4k. I always advice not to use lcd4linux on an Uno4Kse. 
Besides that, tastes are different so I personally will not use this skin although I appreciate the time McelliotG must have put in creating this skin.

If it’s necessary to remove Lcd4linux for testing purposes I will not hesitate to test this. 


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: Glamour Aura FHD skin - first public release canditate (RC3) #214 Pr2

  • PLi® Contributor
  • 3,917 posts

+165
Excellent

Posted 8 January 2020 - 19:53

LCD4linux also cause troubles on the Duo4K.

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Glamour Aura FHD skin - first public release canditate (RC3) #215 WanWizard

  • Forum Moderator
    PLi® Core member
  • 50,063 posts

+900
Excellent

Posted 8 January 2020 - 20:04

Yup.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Glamour Aura FHD skin - first public release canditate (RC3) #216 Frenske

  • Forum Moderator
    PLi® Core member
  • 22,828 posts

+211
Excellent

Posted 8 January 2020 - 21:02

I’ll test a random other box later this evening with this skin.


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: Glamour Aura FHD skin - first public release canditate (RC3) #217 Frenske

  • Forum Moderator
    PLi® Core member
  • 22,828 posts

+211
Excellent

Posted 8 January 2020 - 21:11

I just installed the skin remotely and will test it as soon as I’m available. 

Attached Files


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: Glamour Aura FHD skin - first public release canditate (RC3) #218 MCelliotG

  • Senior Member
  • 373 posts

+29
Good

Posted 8 January 2020 - 22:05

Guys, thank you for testing my skin.

I'm currently testing the colored skins now, and I have encountered a little problem with the ipk standalone installers I make.

The skins use the same Converters/Renderers (as they should). Since the ipks should be working as standalone installers, file clashes are inevitable, when one skin tries to install when another is already installed.

 

On OpenATV I solved this problem easily with the Replaces flag in the control file. This will overwrite and replace only the common files, so if the user wants a second Glamour skin, everything should be fine. Additionally, I wrote a postrm skin that will prevent removing the Converters/Renderers if another Glamour skin is still in use.

 

On OpenPLI however the Replaces flag does not work as I expected. The new skin will completely uninstall the other first. As a dirty workaround I wrote an additional postinst script that initially copies the converters to /tmp and then overwrites the installed ones, but I don't like this way.

 

Should I leave it this way, or this will cause troubles in building from Github or even updating from it?

 

Why the Replaces flag in the control file works differently between OpenPLI and OpenATV?


Edited by MCelliotG, 8 January 2020 - 22:06.


Re: Glamour Aura FHD skin - first public release canditate (RC3) #219 WanWizard

  • Forum Moderator
    PLi® Core member
  • 50,063 posts

+900
Excellent

Posted 8 January 2020 - 22:54

The Replaces flag works on package level, so if you define that A.ipk replaces B.ipk, and B is installed, B will be removed when A is installed.

 

If ATV does something different, they either hacked something custom in, or they manually constructed the ipk outside of the normal bitbake build process, so files are not marked as "under version control", and included a postrm script to manually remove the files (or worse, don't remove them at all) when you remove the skin package. The fact that you talk about manually adding stuff to the control file hints at the second option.

 

Both however are equally bad and should be avoided at all costs.

 

The proper way to deal with this is to create two packages: the different skin packages, and a skin-common package that contains the shared files, and then define a dependency between the two, so that if you install a skin, the common package is installed too. And the common package will be automatically removed if you remove the last skin that depends on it.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Glamour Aura FHD skin - first public release canditate (RC3) #220 MCelliotG

  • Senior Member
  • 373 posts

+29
Good

Posted 9 January 2020 - 10:27

Thank you I was thinking the same thing!

Στάλθηκε από το Redmi Note 5 μου χρησιμοποιώντας Tapatalk




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users