Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #381 cris

  • Member
  • 8 posts

0
Neutral

Posted 31 March 2018 - 19:54

Thank you Cris, I dont have the error on Fedora 27. But I'll test and add the patch asap.

 

Thank you very much for the hard work!
Reusing old devices has also a positive environmental impact. :D

This is the only "serious error" I encountered building for dm800, dm800se and dm8000 using Debian Testing.


Edited by cris, 31 March 2018 - 19:58.


Re: Howto build unofficial pli for your unsupported receiver #382 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 31 March 2018 - 20:19

We've never used oscam.cc ?

yes for a while, because the streamboard was down
https://forums.openp...ndpost&p=848057

edit:
you maybe right
www.oscam.cc is not the sam as download.oscam.cc

Edited by mrvica, 31 March 2018 - 20:22.


Re: Howto build unofficial pli for your unsupported receiver #383 WanWizard

  • PLi® Core member
  • 70,359 posts

+1,807
Excellent

Posted 31 March 2018 - 21:41

Either way, oscam.cc doesn't exist anymore, since a few weeks. I haven't found a really reliable mirror yet.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Howto build unofficial pli for your unsupported receiver #384 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 1 April 2018 - 09:22

Either way, oscam.cc doesn't exist anymore, since a few weeks. I haven't found a really reliable mirror yet.


You can use https://github.com/PLi-metas/oscam ;)

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #385 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 1 April 2018 - 10:02

Change the SRC_URI line in these two files:
meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-oscam.bb
meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-oscam-emu.bb
 
to:
 
SRC_URI = "svn://www.oscam.cc/svn/oscam-mirror;protocol=http;module=trunk;scmdata=keep"

how we should chahge it now

Re: Howto build unofficial pli for your unsupported receiver #386 WanWizard

  • PLi® Core member
  • 70,359 posts

+1,807
Excellent

Posted 1 April 2018 - 15:08

 

How is that maintained / kept up to date?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Howto build unofficial pli for your unsupported receiver #387 HFX

  • Senior Member
  • 323 posts

+8
Neutral

Posted 1 April 2018 - 15:34

Hi, I wil program your image (develop-dm920-02.03.2018) for the dreambox 920 but it is a web file, how must i this web file programming on my dreambox 920 ? (not posseble via webinterface)

 

normaly is it a .tar file 



Re: Howto build unofficial pli for your unsupported receiver #388 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 1 April 2018 - 17:13

Hi,

Unzip the file develop-dm920-28.03.2018.zip
then unzip the file openpli-enigma2-homebuild-dm920_web.zip
you will get folder openpli-enigma2-homebuild-dm920_web
inside the folder 'dm920'
and inside 'rootfs.tar.bz2'
That rootfs.tar.bz2 you can flash via web interface. Tested and the file is OK.

Attached Files


Edited by zeros, 1 April 2018 - 17:15.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #389 lilo74

  • Member
  • 13 posts

0
Neutral

Posted 1 April 2018 - 17:37

my log:

Attached Files



Re: Howto build unofficial pli for your unsupported receiver #390 jenseneverest

  • Senior Member
  • 65 posts

+5
Neutral

Posted 1 April 2018 - 19:13

Stumbled onto this thread today, thank you to an involved will be great to build an image for my box again



Re: Howto build unofficial pli for your unsupported receiver #391 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 1 April 2018 - 20:12

You can use https://github.com/PLi-metas/oscam ;)

 
How is that maintained / kept up to date?

I do check oscam sources every week (So it will be updated once a week) but it seems there is something wrong with them as they didn't push any updates and oscam.cc went to oblivion.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #392 pop1234

  • Member
  • 17 posts

0
Neutral

Posted 1 April 2018 - 21:10

 

 

You can use https://github.com/PLi-metas/oscam ;)

 
How is that maintained / kept up to date?

I do check oscam sources every week (So it will be updated once a week) but it seems there is something wrong with them as they didn't push any updates and oscam.cc went to oblivion.

 

 

update 1 avr. 2018

http://www.streamboa...changeset/11402

http://www.streamboa...i/BuildingOscam


Edited by pop1234, 1 April 2018 - 21:10.


Re: Howto build unofficial pli for your unsupported receiver #393 WanWizard

  • PLi® Core member
  • 70,359 posts

+1,807
Excellent

Posted 1 April 2018 - 21:23

Streamboard is offline more than it is online, which is a nightmare if you're trying to build an image.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Howto build unofficial pli for your unsupported receiver #394 pop1234

  • Member
  • 17 posts

0
Neutral

Posted 1 April 2018 - 21:37

Streamboard is offline more than it is online, which is a nightmare if you're trying to build an image.

 

http://repo.or.cz/oscam.git



Re: Howto build unofficial pli for your unsupported receiver #395 cris

  • Member
  • 8 posts

0
Neutral

Posted 2 April 2018 - 18:47

Is it possible to generate the 3rd-party feeds?



Re: Howto build unofficial pli for your unsupported receiver #396 tomko

  • Senior Member
  • 39 posts

0
Neutral

Posted 2 April 2018 - 19:50

Hello, I noticed that it started support for gigablue UHD Quad 4K, is it possible that support will be for gigablue ue 4k? thanks to replay


Edited by tomko, 2 April 2018 - 19:51.


Re: Howto build unofficial pli for your unsupported receiver #397 WanWizard

  • PLi® Core member
  • 70,359 posts

+1,807
Excellent

Posted 2 April 2018 - 21:06

Ask Gigablue. 


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Howto build unofficial pli for your unsupported receiver #398 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 3 April 2018 - 06:03

Streamboard is offline more than it is online, which is a nightmare if you're trying to build an image.

You can use https://github.com/PLi-metas/oscam as Hains is helping too :)


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #399 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 3 April 2018 - 06:13

 

After adding that line, I got this error:

ERROR: /home/tahir/openpli/openpli-oe-core/meta-local/recipes-local/images/my-image.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard' - possibly invalid type name or missing support class --:--:--
ERROR: Failed to parse recipe: /home/tahir/openpli/openpli-oe-core/meta-local/recipes-local/images/my-image.bb

Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1

 

 

 

While trying to compile for amlogic-p230 I encountered this error, any suggestions:

DEBUG: Executing shell function do_compile
NOTE: make -j 4 V=1 HOSTCC=gcc  -isystem/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/include -O2 -pipe -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-O1 -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git O=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build gxl_p230_v1_config
NOTE: make -j 4 V=1 HOSTCC=gcc  -isystem/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/include -O2 -pipe -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-O1 -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git O=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build all
make: Entering directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git'
make -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build KBUILD_SRC=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git \
-f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile gxl_p230_v1_config
make -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.build obj=scripts/basic
ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git source
/bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/mkmakefile \
    /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git . 2015 01
  GEN     ./Makefile
rm -f .tmp_quiet_recordmcount
/bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/multiconfig.sh gxl_p230_v1_config
scripts/kconfig/conf --defconfig=arch/../configs/.tmp_defconfig Kconfig
#
# configuration written to .config
#
make: Leaving directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git'
make: Entering directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git'
make -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build KBUILD_SRC=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git \
-f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile all
make[1]: aarch64-none-elf-gcc: Command not found
/bin/sh: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/../gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin/aarch64-none-elf-gcc: No such file or directory
dirname: missing operand
Try 'dirname --help' for more information.
make -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile silentoldconfig
make -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.build obj=scripts/basic
ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git source
rm -f .tmp_quiet_recordmcount
/bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/mkmakefile \
    /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git . 2015 01
  GEN     ./Makefile
/bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/multiconfig.sh silentoldconfig
mkdir -p include/config include/generated
scripts/kconfig/conf --silentoldconfig Kconfig
mkdir -p include/asm
ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include/asm/arch-gxl \
	include/asm/arch
mkdir -p include2
ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include/asm \
	include2/asm
set -e; : '  CHK     include/config.h'; mkdir -p include/; 	(echo "/* Automatically generated - do not edit */"; for i in $(echo "" | sed 's/,/ /g'); do echo \#define CONFIG_$i | sed '/=/ {s/=/	/;q; } ; { s/$/	1/; }'; done; echo \#define CONFIG_BOARDDIR board/amlogic/gxm_q200_v1; echo \#include \<config_defaults.h\>; echo \#include \</home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/board/amlogic/configs/gxm_q200_v1.h\>; echo \#include \<asm/config.h\>; echo \#include \<config_fallbacks.h\>; echo \#include \<config_uncmd_spl.h\>; echo \#define SYS_PROMPT \""gxl_p230_v1"\#\"; ) < /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.autoconf > include/config.h.tmp; if [ -r include/config.h ] && cmp -s include/config.h include/config.h.tmp; then rm -f include/config.h.tmp; else : '  UPD     include/config.h'; mv -f include/config.h.tmp include/config.h; fi
  aarch64-none-elf-gcc -x c -DDO_DEPS_ONLY -M -MP -Wall -Wstrict-prototypes -Wno-format-security -fno-builtin -ffreestanding -D__KERNEL__ -D__UBOOT__  -D__ARM__             -ffunction-sections -fdata-sections -fno-common -ffixed-r9   -fno-common -ffixed-x18 -pipe -Iinclude -Iinclude  -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include -include /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/linux/kconfig.h  -nostdinc -isystem  -MQ include/config/auto.conf /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/common.h > include/autoconf.mk.dep || { rm include/autoconf.mk.dep; false; }
/bin/sh: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/../gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin/aarch64-none-elf-gcc: No such file or directory
  aarch64-none-elf-gcc -E -Wall -Wstrict-prototypes -Wno-format-security -fno-builtin -ffreestanding -D__KERNEL__ -D__UBOOT__  -D__ARM__             -ffunction-sections -fdata-sections -fno-common -ffixed-r9   -fno-common -ffixed-x18 -pipe -Iinclude -Iinclude  -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include -include /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/linux/kconfig.h  -nostdinc -isystem  -DDO_DEPS_ONLY -dM /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/common.h > include/autoconf.mk.tmp && { sed -n -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/tools/scripts/define2mk.sed include/autoconf.mk.tmp | while read line; do if ! grep -q "${line%=*}=" include/config/auto.conf; then echo "$line"; fi done > include/autoconf.mk; rm include/autoconf.mk.tmp; } || { rm include/autoconf.mk.tmp; false; }
/bin/sh: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/../gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin/aarch64-none-elf-gcc: No such file or directory
/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.autoconf:64: recipe for target 'include/autoconf.mk' failed
make[3]: *** [include/autoconf.mk] Error 1
make[3]: *** Waiting for unfinished jobs....
/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.autoconf:40: recipe for target 'include/autoconf.mk.dep' failed
make[3]: *** [include/autoconf.mk.dep] Error 1
ERROR: oe_runmake failed
/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile:477: recipe for target 'silentoldconfig' failed
make[2]: *** [silentoldconfig] Error 1
make[1]: *** No rule to make target 'include/config/auto.conf', needed by 'include/config/uboot.release'.  Stop.
Makefile:147: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
make: Leaving directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git'
WARNING: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/temp/run.do_compile.7040:1 exit 1 from 'exit 1'
ERROR: Function failed: do_compile (log file is located at /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/temp/log.do_compile.7040)

@Persian Prince

If you are back from vacations, can you help us on these two issues in meta meson compilation?



Re: Howto build unofficial pli for your unsupported receiver #400 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 3 April 2018 - 06:32

Yeah I just got back yesterday, I'm testing "wetek-play2" build right now ;)


Open Vision sources: https://github.com/OpenVisionE2



29 user(s) are reading this topic

0 members, 29 guests, 0 anonymous users