Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #361 kloklo

  • Senior Member
  • 35 posts

0
Neutral

Posted 26 March 2018 - 13:47

Can anyone see that problem?

Thank

 

ERROR: Task (/home/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_git.bb:do_compile) failed with exit code '1'
 



Re: Howto build unofficial pli for your unsupported receiver #362 Abu Baniaz

  • PLi® Contributor
  • 2,494 posts

+64
Good

Posted 26 March 2018 - 14:05

It might be better for you to upload the actual failure log file. Look at the output, it will tell you exactly where it is.

Re: Howto build unofficial pli for your unsupported receiver #363 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 28 March 2018 - 14:25

While trying to compile for amlogic-p230 I encountered this error, any suggestions:

DEBUG: Executing shell function do_compile
NOTE: make -j 4 V=1 HOSTCC=gcc  -isystem/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/include -O2 -pipe -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-O1 -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git O=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build gxl_p230_v1_config
NOTE: make -j 4 V=1 HOSTCC=gcc  -isystem/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/include -O2 -pipe -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-O1 -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git O=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build all
make: Entering directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git'
make -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build KBUILD_SRC=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git \
-f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile gxl_p230_v1_config
make -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.build obj=scripts/basic
ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git source
/bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/mkmakefile \
    /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git . 2015 01
  GEN     ./Makefile
rm -f .tmp_quiet_recordmcount
/bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/multiconfig.sh gxl_p230_v1_config
scripts/kconfig/conf --defconfig=arch/../configs/.tmp_defconfig Kconfig
#
# configuration written to .config
#
make: Leaving directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git'
make: Entering directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git'
make -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build KBUILD_SRC=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git \
-f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile all
make[1]: aarch64-none-elf-gcc: Command not found
/bin/sh: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/../gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin/aarch64-none-elf-gcc: No such file or directory
dirname: missing operand
Try 'dirname --help' for more information.
make -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile silentoldconfig
make -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.build obj=scripts/basic
ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git source
rm -f .tmp_quiet_recordmcount
/bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/mkmakefile \
    /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git . 2015 01
  GEN     ./Makefile
/bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/multiconfig.sh silentoldconfig
mkdir -p include/config include/generated
scripts/kconfig/conf --silentoldconfig Kconfig
mkdir -p include/asm
ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include/asm/arch-gxl \
	include/asm/arch
mkdir -p include2
ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include/asm \
	include2/asm
set -e; : '  CHK     include/config.h'; mkdir -p include/; 	(echo "/* Automatically generated - do not edit */"; for i in $(echo "" | sed 's/,/ /g'); do echo \#define CONFIG_$i | sed '/=/ {s/=/	/;q; } ; { s/$/	1/; }'; done; echo \#define CONFIG_BOARDDIR board/amlogic/gxm_q200_v1; echo \#include \<config_defaults.h\>; echo \#include \</home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/board/amlogic/configs/gxm_q200_v1.h\>; echo \#include \<asm/config.h\>; echo \#include \<config_fallbacks.h\>; echo \#include \<config_uncmd_spl.h\>; echo \#define SYS_PROMPT \""gxl_p230_v1"\#\"; ) < /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.autoconf > include/config.h.tmp; if [ -r include/config.h ] && cmp -s include/config.h include/config.h.tmp; then rm -f include/config.h.tmp; else : '  UPD     include/config.h'; mv -f include/config.h.tmp include/config.h; fi
  aarch64-none-elf-gcc -x c -DDO_DEPS_ONLY -M -MP -Wall -Wstrict-prototypes -Wno-format-security -fno-builtin -ffreestanding -D__KERNEL__ -D__UBOOT__  -D__ARM__             -ffunction-sections -fdata-sections -fno-common -ffixed-r9   -fno-common -ffixed-x18 -pipe -Iinclude -Iinclude  -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include -include /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/linux/kconfig.h  -nostdinc -isystem  -MQ include/config/auto.conf /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/common.h > include/autoconf.mk.dep || { rm include/autoconf.mk.dep; false; }
/bin/sh: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/../gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin/aarch64-none-elf-gcc: No such file or directory
  aarch64-none-elf-gcc -E -Wall -Wstrict-prototypes -Wno-format-security -fno-builtin -ffreestanding -D__KERNEL__ -D__UBOOT__  -D__ARM__             -ffunction-sections -fdata-sections -fno-common -ffixed-r9   -fno-common -ffixed-x18 -pipe -Iinclude -Iinclude  -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include -include /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/linux/kconfig.h  -nostdinc -isystem  -DDO_DEPS_ONLY -dM /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/common.h > include/autoconf.mk.tmp && { sed -n -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/tools/scripts/define2mk.sed include/autoconf.mk.tmp | while read line; do if ! grep -q "${line%=*}=" include/config/auto.conf; then echo "$line"; fi done > include/autoconf.mk; rm include/autoconf.mk.tmp; } || { rm include/autoconf.mk.tmp; false; }
/bin/sh: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/../gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin/aarch64-none-elf-gcc: No such file or directory
/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.autoconf:64: recipe for target 'include/autoconf.mk' failed
make[3]: *** [include/autoconf.mk] Error 1
make[3]: *** Waiting for unfinished jobs....
/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.autoconf:40: recipe for target 'include/autoconf.mk.dep' failed
make[3]: *** [include/autoconf.mk.dep] Error 1
ERROR: oe_runmake failed
/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile:477: recipe for target 'silentoldconfig' failed
make[2]: *** [silentoldconfig] Error 1
make[1]: *** No rule to make target 'include/config/auto.conf', needed by 'include/config/uboot.release'.  Stop.
Makefile:147: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
make: Leaving directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git'
WARNING: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/temp/run.do_compile.7040:1 exit 1 from 'exit 1'
ERROR: Function failed: do_compile (log file is located at /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/temp/log.do_compile.7040)


Re: Howto build unofficial pli for your unsupported receiver #364 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 28 March 2018 - 20:30

March 28, 2018
Images for dm7020hdV1, dm900 and dm920 ready and up to date . It needs a fresh new flash due to new kernel and gstreamer.
develop-dm7020hdV1-28.03.2018:
https://www.online.e...0f-a2305b575d83
develop-dm900-28.03.2018:
https://www.online.e...fb-5b434e572f42
develop-dm920-28.03.2018:
https://www.online.e...e7-e488035d9a42
Feed such as always.
Thanks all involved!  :)

Edited by zeros, 28 March 2018 - 20:31.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #365 MastaG

  • Senior Member
  • 1,531 posts

+118
Excellent

Posted 28 March 2018 - 20:37

Niceeeeee zeros

Re: Howto build unofficial pli for your unsupported receiver #366 starz

  • Senior Member
  • 59 posts

+1
Neutral

Posted 28 March 2018 - 21:20

Dear @engineerkhan15,when I try to build for amlogic-p200 I get the same compile error.

Re: Howto build unofficial pli for your unsupported receiver #367 gorski

  • Senior Member
  • 1,699 posts

+46
Good

Posted 29 March 2018 - 00:59

@gorski a little offtopic, but from your screenshots I see that PurE2 has been built using OE-A Core 4.2 using a git snapshot from gstreamer (which will soon be branched into 1.14).

But would you happen to know if (and where) they host the source for their PurE2 enigma2 fork?

 

It gives me a great pleasure, m8, to present you with this:

 

https://github.com/PURE2-Team/pure2

 

It's a start... :)


<span style='font-family: comic sans ms,cursive'>"Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!</span><br /> <br /><span style='font-family: comic sans ms,cursive'>Laziness and cowardice are the reasons why such a large proportion of men, even when nature has long emancipated them from alien guidance..." I. Kant, "Political writings" (1784)</span><br /> <br /><span style='font-family: comic sans ms,cursive'><a class='bbc_url' href='<a class='bbc_url' href='http://eserver.org/p...lightenment.txt'>http://eserver.org/p...ent.txt</a>'><a class='bbc_url' href='http://www.english.upenn.edu/~mgamer/Etexts/kant.html</a>'>http://www.english.upenn.edu/~mgamer/Etexts/kant.html</a></a> - the jolly text on Enlightenment, at the basis of Modernity...</span>

Re: Howto build unofficial pli for your unsupported receiver #368 MastaG

  • Senior Member
  • 1,531 posts

+118
Excellent

Posted 29 March 2018 - 07:53

Thank you gorski my friend :)

It's nice the team decided to make their e2 source public.. as it was forked from public work anyways ;)

I'll have a look in their kitchen soon.. too bad they didn't upload their commit-history, but great job nevertheless!



Re: Howto build unofficial pli for your unsupported receiver #369 gorski

  • Senior Member
  • 1,699 posts

+46
Good

Posted 29 March 2018 - 12:03

Indeed!

The old PB Team had a bad history with some commercial guys before, stealing stuff and singularly minded to make money only, not crediting and wreaking a havoc on their server, from what I heard and from what I remember, hence their decision...

 

On the good side, though: many really important developments that came from PB Team (Graugans and Delfi in particular, especially on SH4 platform and ARM for WeStek :D etc. etc.) have always found their way back into the community, mainly under other people's nicks... So, nothing important was lost to the community, for sure... Except maybe PB's Centre with abolished automount and awesome Device Manager, which to this day, I deem the best possible option... But... who's listening to me...??? :P

It's a real shame that is lost... I will speak to the guys (Terrajoe in particular) and I will ask them to release the code to the public, maybe this can still find its way back to life, since it would be GREAT to have that option, especially with some older machines, with limited flash, as the Centre contains all the tools needed to make it all work great, a very PB special version of (Flash) Expander included in it by default.

 

Keep on ploughing, I say... :)


<span style='font-family: comic sans ms,cursive'>"Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!</span><br /> <br /><span style='font-family: comic sans ms,cursive'>Laziness and cowardice are the reasons why such a large proportion of men, even when nature has long emancipated them from alien guidance..." I. Kant, "Political writings" (1784)</span><br /> <br /><span style='font-family: comic sans ms,cursive'><a class='bbc_url' href='<a class='bbc_url' href='http://eserver.org/p...lightenment.txt'>http://eserver.org/p...ent.txt</a>'><a class='bbc_url' href='http://www.english.upenn.edu/~mgamer/Etexts/kant.html</a>'>http://www.english.upenn.edu/~mgamer/Etexts/kant.html</a></a> - the jolly text on Enlightenment, at the basis of Modernity...</span>

Re: Howto build unofficial pli for your unsupported receiver #370 MastaG

  • Senior Member
  • 1,531 posts

+118
Excellent

Posted 29 March 2018 - 12:35

* New unofficial test build for Fulan sh4 (spark/spark7162)

Download: https://mega.nz/#F!v...DLHfab11t5_y5Sg

- Now built using -O2 instead of -Os, it feels a bit faster now

- Disabled zram by default as it slows down things

- Includes gstreamer 1.14 as well (thx Taapat)

- Uchardet upgraded to git version

- Merged PLi's latest enigma2 rev: 9310a05

- Built using latest openpli-oe-core rev: ab347d9

- Many cleanups and fixes

- Removed serviceapp

 

* Note: zram is disabled by default since we're using extra memory from video ram.

  This breaks PIP, but that was limited to SD-channels anyways.

  If you still want to use zram, login using telnet and issue the following commands:

 

touch /etc/.zram
reboot

 

* Note2: serviceapp has been removed in favor of Taapats service-player for libeplayer3 and gstreamer.

  The playback system is set to libeplayer3 by default, which provides the same playback functionality as serviceapp + exteplayer3 as default player.

  If you'd like to swtich to gstreamer 1.14, you can do this by going to: Menu -> Settings -> System -> Usage Setup (this requires a restart of enigma2)

  Exteplayer3 (and now also gstplayer) is still included for use with IPTV Player :)



Re: Howto build unofficial pli for your unsupported receiver #371 pop1234

  • Member
  • 17 posts

0
Neutral

Posted 29 March 2018 - 13:04

thank you MastaG



Re: Howto build unofficial pli for your unsupported receiver #372 ahmed gazye

  • Member
  • 5 posts

0
Neutral

Posted 29 March 2018 - 16:32

* New unofficial test build for Fulan sh4 (spark/spark7162)

Download: https://mega.nz/#F!v...DLHfab11t5_y5Sg

- Now built using -O2 instead of -Os, it feels a bit faster now

- Disabled zram by default as it slows down things

- Includes gstreamer 1.14 as well (thx Taapat)

- Uchardet upgraded to git version

- Merged PLi's latest enigma2 rev: 9310a05

- Built using latest openpli-oe-core rev: ab347d9

- Many cleanups and fixes

- Removed serviceapp

 

* Note: zram is disabled by default since we're using extra memory from video ram.

  This breaks PIP, but that was limited to SD-channels anyways.

  If you still want to use zram, login using telnet and issue the following commands:

 

touch /etc/.zram
reboot

* Note2: serviceapp has been removed in favor of Taapats service-player for libeplayer3 and gstreamer.

  The playback system is set to libeplayer3 by default, which provides the same playback functionality as serviceapp + exteplayer3 as default player.

  If you'd like to swtich to gstreamer 1.14, you can do this by going to: Menu -> Settings -> System -> Usage Setup (this requires a restart of enigma2)

  Exteplayer3 (and now also gstplayer) is still included for use with IPTV Player :)

677367993.gif

thanks a lot MastaG On your support for our humble equipment, which is less support for it because it is old and cheap price for modern devices and I would like to convey greetings and admiration of thousands of users to the value of the work where it posted in your name on more than one site after permission of your presence and receive all the praise and praise and hope your generous complement support for these devices thanks again I wish you the best of luck

 

402032033.gif

618145950.png
402032033.gif



Re: Howto build unofficial pli for your unsupported receiver #373 vassili_47

  • Member
  • 9 posts

0
Neutral

Posted 29 March 2018 - 23:58

thank you MastaG



Re: Howto build unofficial pli for your unsupported receiver #374 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 30 March 2018 - 05:05

 

 

please submit a PR then :)

I have never submitted a PR on github. A new user of github.

But have submitted now, can you do me a favour to check and let me know that have I done it correct?

 

 

You've committed a new patch with a new name.. but didn't change the kernel recipe (.bb file) to include the new file in the SRC_URI.

 

I have closed old PR and submitted a new PR after making changes to the original file. Can you have a look at it and tell me is it OK now?



Re: Howto build unofficial pli for your unsupported receiver #375 MastaG

  • Senior Member
  • 1,531 posts

+118
Excellent

Posted 30 March 2018 - 10:54

Yeah, you've updated the original patch instead of adding a new one :)

Great job!

Merged :)



Re: Howto build unofficial pli for your unsupported receiver #376 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 30 March 2018 - 17:29

https://github.com/P...etas/meta-dream
Update hardware drivers dm900 and dm920 is on the feed also, just for info.

Edited by zeros, 30 March 2018 - 17:30.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #377 cris

  • Member
  • 8 posts

0
Neutral

Posted 31 March 2018 - 15:22

I was unable to build for the dm800 due to an error with glibc_2.19:

Error 134
| make: *** Waiting for unfinished jobs....
| localedef: loadlocale.c:129: _nl_intern_locale_data: Assertion `cnt < (sizeof (_nl_value_type_LC_TIME) / sizeof (_nl_value_type_LC_TIME[0]))' failed.
| qemu: uncaught target signal 6 (Aborted) - core dumped

Adding the following patch to glibc_2.19.bb has helped to complete the build:

 

Attached File  gracefully_handle_incompatible_locale_data.patch   613bytes   8 downloads

 

Note: I've grabbed the patch from https://patchwork.oz...g/patch/521143/



Re: Howto build unofficial pli for your unsupported receiver #378 MastaG

  • Senior Member
  • 1,531 posts

+118
Excellent

Posted 31 March 2018 - 17:38

Thank you Cris, I dont have the error on Fedora 27. But I'll test and add the patch asap.

Re: Howto build unofficial pli for your unsupported receiver #379 mrvica

  • Senior Member
  • 1,259 posts

+86
Good

Posted 31 March 2018 - 18:04

we must switch to another server
https://download.oscam.cc/

Re: Howto build unofficial pli for your unsupported receiver #380 WanWizard

  • PLi® Core member
  • 70,347 posts

+1,804
Excellent

Posted 31 March 2018 - 19:47

We've never used oscam.cc ?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.



10 user(s) are reading this topic

0 members, 10 guests, 0 anonymous users