Posted 31 March 2018 - 19:54
Thank you Cris, I dont have the error on Fedora 27. But I'll test and add the patch asap.
Thank you very much for the hard work!
Reusing old devices has also a positive environmental impact. 
This is the only "serious error" I encountered building for dm800, dm800se and dm8000 using Debian Testing.
Edited by cris, 31 March 2018 - 19:58.
Posted 31 March 2018 - 20:19
yes for a while, because the streamboard was downWe've never used oscam.cc ?
Edited by mrvica, 31 March 2018 - 20:22.
Posted 31 March 2018 - 21:41
Either way, oscam.cc doesn't exist anymore, since a few weeks. I haven't found a really reliable mirror yet.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 1 April 2018 - 09:22
Either way, oscam.cc doesn't exist anymore, since a few weeks. I haven't found a really reliable mirror yet.
Open Vision sources: https://github.com/OpenVisionE2
Posted 1 April 2018 - 10:02
how we should chahge it nowChange the SRC_URI line in these two files:
meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-oscam.bb
meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-oscam-emu.bb
to:
SRC_URI = "svn://www.oscam.cc/svn/oscam-mirror;protocol=http;module=trunk;scmdata=keep"
Posted 1 April 2018 - 15:08
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 1 April 2018 - 15:34
Hi, I wil program your image (develop-dm920-02.03.2018) for the dreambox 920 but it is a web file, how must i this web file programming on my dreambox 920 ? (not posseble via webinterface)
normaly is it a .tar file
Posted 1 April 2018 - 17:13
Hi,
Unzip the file develop-dm920-28.03.2018.zip
then unzip the file openpli-enigma2-homebuild-dm920_web.zip
you will get folder openpli-enigma2-homebuild-dm920_web
inside the folder 'dm920'
and inside 'rootfs.tar.bz2'
That rootfs.tar.bz2 you can flash via web interface. Tested and the file is OK.
30.03.2018.png 439.52KB
12 downloads
Edited by zeros, 1 April 2018 - 17:15.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 1 April 2018 - 19:13
Stumbled onto this thread today, thank you to an involved will be great to build an image for my box again
Posted 1 April 2018 - 20:12
You can use https://github.com/PLi-metas/oscam
How is that maintained / kept up to date?
Open Vision sources: https://github.com/OpenVisionE2
Posted 1 April 2018 - 21:10
You can use https://github.com/PLi-metas/oscam
How is that maintained / kept up to date?
I do check oscam sources every week (So it will be updated once a week) but it seems there is something wrong with them as they didn't push any updates and oscam.cc went to oblivion.
update 1 avr. 2018
http://www.streamboa...changeset/11402
http://www.streamboa...i/BuildingOscam
Edited by pop1234, 1 April 2018 - 21:10.
Posted 1 April 2018 - 21:23
Streamboard is offline more than it is online, which is a nightmare if you're trying to build an image.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 1 April 2018 - 21:37
Streamboard is offline more than it is online, which is a nightmare if you're trying to build an image.
Posted 2 April 2018 - 18:47
Is it possible to generate the 3rd-party feeds?
Posted 2 April 2018 - 19:50
Hello, I noticed that it started support for gigablue UHD Quad 4K, is it possible that support will be for gigablue ue 4k? thanks to replay
Edited by tomko, 2 April 2018 - 19:51.
Posted 2 April 2018 - 21:06
Ask Gigablue.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 3 April 2018 - 06:03
Streamboard is offline more than it is online, which is a nightmare if you're trying to build an image.
You can use https://github.com/PLi-metas/oscam as Hains is helping too 
Open Vision sources: https://github.com/OpenVisionE2
Posted 3 April 2018 - 06:13
After adding that line, I got this error:
ERROR: /home/tahir/openpli/openpli-oe-core/meta-local/recipes-local/images/my-image.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard' - possibly invalid type name or missing support class --:--:-- ERROR: Failed to parse recipe: /home/tahir/openpli/openpli-oe-core/meta-local/recipes-local/images/my-image.bb Summary: There were 2 ERROR messages shown, returning a non-zero exit code. Makefile:125: recipe for target 'image' failed make: *** [image] Error 1
While trying to compile for amlogic-p230 I encountered this error, any suggestions:
DEBUG: Executing shell function do_compile NOTE: make -j 4 V=1 HOSTCC=gcc -isystem/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/include -O2 -pipe -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-O1 -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git O=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build gxl_p230_v1_config NOTE: make -j 4 V=1 HOSTCC=gcc -isystem/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/include -O2 -pipe -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -L/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/recipe-sysroot-native/lib -Wl,-O1 -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git O=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build all make: Entering directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git' make -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build KBUILD_SRC=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git \ -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile gxl_p230_v1_config make -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.build obj=scripts/basic ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git source /bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/mkmakefile \ /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git . 2015 01 GEN ./Makefile rm -f .tmp_quiet_recordmcount /bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/multiconfig.sh gxl_p230_v1_config scripts/kconfig/conf --defconfig=arch/../configs/.tmp_defconfig Kconfig # # configuration written to .config # make: Leaving directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git' make: Entering directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git' make -C /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/build KBUILD_SRC=/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git \ -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile all make[1]: aarch64-none-elf-gcc: Command not found /bin/sh: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/../gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin/aarch64-none-elf-gcc: No such file or directory dirname: missing operand Try 'dirname --help' for more information. make -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile silentoldconfig make -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.build obj=scripts/basic ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git source rm -f .tmp_quiet_recordmcount /bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/mkmakefile \ /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git . 2015 01 GEN ./Makefile /bin/sh /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/multiconfig.sh silentoldconfig mkdir -p include/config include/generated scripts/kconfig/conf --silentoldconfig Kconfig mkdir -p include/asm ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include/asm/arch-gxl \ include/asm/arch mkdir -p include2 ln -fsn /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include/asm \ include2/asm set -e; : ' CHK include/config.h'; mkdir -p include/; (echo "/* Automatically generated - do not edit */"; for i in $(echo "" | sed 's/,/ /g'); do echo \#define CONFIG_$i | sed '/=/ {s/=/ /;q; } ; { s/$/ 1/; }'; done; echo \#define CONFIG_BOARDDIR board/amlogic/gxm_q200_v1; echo \#include \<config_defaults.h\>; echo \#include \</home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/board/amlogic/configs/gxm_q200_v1.h\>; echo \#include \<asm/config.h\>; echo \#include \<config_fallbacks.h\>; echo \#include \<config_uncmd_spl.h\>; echo \#define SYS_PROMPT \""gxl_p230_v1"\#\"; ) < /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.autoconf > include/config.h.tmp; if [ -r include/config.h ] && cmp -s include/config.h include/config.h.tmp; then rm -f include/config.h.tmp; else : ' UPD include/config.h'; mv -f include/config.h.tmp include/config.h; fi aarch64-none-elf-gcc -x c -DDO_DEPS_ONLY -M -MP -Wall -Wstrict-prototypes -Wno-format-security -fno-builtin -ffreestanding -D__KERNEL__ -D__UBOOT__ -D__ARM__ -ffunction-sections -fdata-sections -fno-common -ffixed-r9 -fno-common -ffixed-x18 -pipe -Iinclude -Iinclude -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include -include /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/linux/kconfig.h -nostdinc -isystem -MQ include/config/auto.conf /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/common.h > include/autoconf.mk.dep || { rm include/autoconf.mk.dep; false; } /bin/sh: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/../gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin/aarch64-none-elf-gcc: No such file or directory aarch64-none-elf-gcc -E -Wall -Wstrict-prototypes -Wno-format-security -fno-builtin -ffreestanding -D__KERNEL__ -D__UBOOT__ -D__ARM__ -ffunction-sections -fdata-sections -fno-common -ffixed-r9 -fno-common -ffixed-x18 -pipe -Iinclude -Iinclude -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include -I/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/arch/arm/include -include /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/linux/kconfig.h -nostdinc -isystem -DDO_DEPS_ONLY -dM /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/include/common.h > include/autoconf.mk.tmp && { sed -n -f /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/tools/scripts/define2mk.sed include/autoconf.mk.tmp | while read line; do if ! grep -q "${line%=*}=" include/config/auto.conf; then echo "$line"; fi done > include/autoconf.mk; rm include/autoconf.mk.tmp; } || { rm include/autoconf.mk.tmp; false; } /bin/sh: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/../gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin/aarch64-none-elf-gcc: No such file or directory /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.autoconf:64: recipe for target 'include/autoconf.mk' failed make[3]: *** [include/autoconf.mk] Error 1 make[3]: *** Waiting for unfinished jobs.... /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/scripts/Makefile.autoconf:40: recipe for target 'include/autoconf.mk.dep' failed make[3]: *** [include/autoconf.mk.dep] Error 1 ERROR: oe_runmake failed /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git/Makefile:477: recipe for target 'silentoldconfig' failed make[2]: *** [silentoldconfig] Error 1 make[1]: *** No rule to make target 'include/config/auto.conf', needed by 'include/config/uboot.release'. Stop. Makefile:147: recipe for target 'sub-make' failed make: *** [sub-make] Error 2 make: Leaving directory '/home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/git' WARNING: /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/temp/run.do_compile.7040:1 exit 1 from 'exit 1' ERROR: Function failed: do_compile (log file is located at /home/tahir/openpli/openpli-oe-core/build/tmp/work/amlogic_p230-oe-linux/u-boot-amlogic/1_v2015.01+gitAUTOINC+ffd40ecd0e-r0/temp/log.do_compile.7040)
@Persian Prince
If you are back from vacations, can you help us on these two issues in meta meson compilation?
Posted 3 April 2018 - 06:32
Yeah I just got back yesterday, I'm testing "wetek-play2" build right now
Open Vision sources: https://github.com/OpenVisionE2
0 members, 0 guests, 0 anonymous users
This topic is locked
